NEXCOM NSA 3110
-
I know this question has been asked multiple times in the forums, but i have not found an answer. Does anybody know the steps to configure LCD on a NEXCOM NSA3110. i have loded LCDproc dev, but i can't get it to work.
I am running the pfsense 2.15.
Any help will be greatly appreciated.
Regards
-
Hi skippy007,
the steps to configure it:
- Services > lcdproc > Server
- Com Port = Parallel port1 8/dev/lpt0)
- Display Size = 2 row 16 columns
- Driver = Watchguard Firebox whit SDEC
- Connection Type= 4bit wiring to parallel port
- Refresh frequency = 5 sec
- SAVE
- Status > Services >Lcdproc => Restart
Enjoy :D
another trick to set correctly the display's buttons:
-
Diagnostics > Edit File
-
Save/load from path: /usr/local/etc/LCDd.conf
-
Change menu section to:
[menu]
MenuKey=Down
EnterKey=Right
UpKey=Up
DownKey=Left -
Save
Remembers all the changes involve a rewrite of this file, so after every update you have to manually edit the file and change the section menu.
Fabio
-
Make those changes to the 'sdeclcd menu settings' section in /usr/local/pkg/lcdproc.inc if you want them to survive a settings save.
Steve
-
Thanks for your replies.
I will try the above instructions tomorrow at work, and will report back.
Greatly appreciated.
Skip..
-
the steps to configure it:
Sir, appreciate if you could confirm your steps for the current shipping PFSense. Just tried " LCDproc " package (not devel. version) and your designated driver is not present.
Alternately, I tried driver " picolcd" which seemed appropriate to me and no luck.
One edit: lcdproc.service isn't loading.
Thanks.
-
The firebox driver is only in the -dev version of the package.
Steve
-
I can confirm the instructions above do make text appear, however not showing the information selected on "screens" tab as I would expect.
Just: (line 1) "LCDproc serve", (line 2) "Cli:0 Scr:0".
Thanks.
-
One quick update on my previous results; after a full halt, cut off and restart, text started to show as expected.
Thank you all for posts. Happy with the results.
Regards,