INSTALL MODEM 3G HUAWEI E303

fzitelli · Mar 18, 2013, 3:56 PM

I tried to install this modem and i faild. How can i do this?

I have
pfsense 2.0.2-RELEASE (amd64)
built on Fri Dec 7 22:39:43 EST 2012
FreeBSD 8.1-RELEASE-p13

When I put the 3G Modem USB show this

umass0: <huawei 0="" 2="" huawi="" mobile,="" class="" 0,="" rev="" 2.00="" 1.02,="" addr="">on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1 Attached to scbus0
umass1: <huawei 0="" 2="" huawi="" mobile,="" class="" 0,="" rev="" 2.00="" 1.02,="" addr="">on usbus2
umass1: SCSI over Bulk-Only; quirks = 0x0000
cd0 at umass-sim 0 bus 0 scbus0 target 0 lun 0
cd0 <huawei mass="" storage="" 2.31="">Removable CD-ROM SCSI-2 deice
cd0 40.000MB/s transfers
cd0: cd present [65536x2408 byte records]
umass1:1:1:-1 Attached to scbus1
(probe0:umass-sim1:1:0:0): TEST UNIT READY CDB 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM Status SCSI status ERROR
(probe0:umass-sim1:1:0:0): SCSI status check condition
(probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc 32,0 (Medium not present)
da0 at umass-sim1 bus 1 scbus1 target 0 lun 0
da0: <huawei sd="" storage="" 2.31="">Renovable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to querty device size faild: NOT READY, Medium not present</huawei></huawei></huawei></huawei>