Watchguard questions
-
I am not sure how to proceed with this right now, it is in production. Running two DSL connections, if I take it down, well there goes my internet.
Might have to do this tonight.
-
Interestingly enough, looking into the missing directories, I am looking in the DEV folder. There is a lot of files inside with a zero size, in fact almost all of them are of a zero size. I am off to find instructions on how to use an HD.
Can I run a full blown version on an HD?
-
I thought the card was big enough, it is an 8gb Kingston CF. Maybe it was a bad image?
-
If the card is 8GB then any image size should be fine then. Some CF cards that claim to be, say, 2GB are actually slightly smaller. Over the years the devs have reduced the image size slightly to allow for this but people keep finding ever smaller CF cards all of which claim to be bigger.
The /dev folder holds the device filesystem where real devices are represented. Most are links pieces of hardware or drivers that are supposed to be 0 size.[2.2.1-RELEASE][root@pfsense.fire.box]/root: ls -l /dev total 3 crw-r--r-- 1 root wheel 0x23 Mar 17 22:35 acpi lrwxr-xr-x 1 root wheel 4 Mar 17 22:35 ad0 -> ada0 lrwxr-xr-x 1 root wheel 6 Mar 17 22:35 ad0s1 -> ada0s1 lrwxr-xr-x 1 root wheel 7 Mar 17 22:35 ad0s1a -> ada0s1a lrwxr-xr-x 1 root wheel 6 Mar 17 22:35 ad0s2 -> ada0s2 lrwxr-xr-x 1 root wheel 7 Mar 17 22:35 ad0s2a -> ada0s2a lrwxr-xr-x 1 root wheel 6 Mar 17 22:35 ad0s3 -> ada0s3 crw-r----- 1 root operator 0x5d Mar 17 22:35 ada0 crw-r----- 1 root operator 0x5f Mar 17 22:35 ada0s1 crw-r----- 1 root operator 0x66 Mar 17 22:35 ada0s1a crw-r----- 1 root operator 0x61 Mar 17 22:35 ada0s2 crw-r----- 1 root operator 0x68 Mar 17 22:35 ada0s2a crw-r----- 1 root operator 0x63 Mar 17 22:35 ada0s3 crw------- 1 root wheel 0x26 Mar 17 22:35 agpgart crw-rw-r-- 1 root operator 0x25 Mar 17 22:35 apm crw-rw---- 1 root operator 0x24 Mar 17 22:35 apmctl crw------- 1 root wheel 0x36 Mar 17 22:35 atkbd0 crw------- 1 root kmem 0x1d Mar 17 22:35 audit crw------- 1 root wheel 0xb May 10 17:44 bpf lrwxr-xr-x 1 root wheel 3 Mar 17 22:35 bpf0 -> bpf crw------- 1 root wheel 0x6 Mar 17 22:47 console crw------- 1 root wheel 0x7 Mar 17 22:35 consolectl crw-rw-rw- 1 root wheel 0x3c Mar 17 22:35 crypto crw-rw-rw- 1 root wheel 0x22 Mar 17 22:35 ctty crw-rw---- 1 uucp dialer 0x2a Mar 17 22:35 cuau0 crw-rw---- 1 uucp dialer 0x2b Mar 17 22:35 cuau0.init crw-rw---- 1 uucp dialer 0x2c Mar 17 22:35 cuau0.lock crw-rw---- 1 uucp dialer 0x30 Mar 17 22:35 cuau1 crw-rw---- 1 uucp dialer 0x31 Mar 17 22:35 cuau1.init crw-rw---- 1 uucp dialer 0x32 Mar 17 22:35 cuau1.lock crw------- 1 root wheel 0x5 Mar 17 22:35 devctl cr--r--r-- 1 root wheel 0x4f Mar 17 22:35 devstat dr-xr-xr-x 2 root wheel 512 May 10 01:01 diskid dr-xr-xr-x 2 root wheel 512 Mar 17 22:35 fd crw------- 1 root wheel 0xd Mar 17 22:35 fido crw-r----- 1 root operator 0x3 Mar 17 22:35 geom.ctl crw------- 1 root wheel 0x1f Mar 17 22:35 io lrwxr-xr-x 1 root wheel 6 Mar 17 22:35 kbd0 -> atkbd0 lrwxr-xr-x 1 root wheel 7 Mar 17 22:35 kbd1 -> kbdmux0 crw------- 1 root wheel 0x8 Mar 17 22:35 kbdmux0 crw------- 1 root wheel 0x21 Mar 17 22:35 klog crw-r----- 1 root kmem 0xf Mar 17 22:35 kmem crw------- 1 root wheel 0x33 Mar 17 22:35 lpt0 crw------- 1 root wheel 0x34 Mar 17 22:35 lpt0.ctl crw-r----- 1 root operator 0x65 Mar 17 22:35 md0 crw-r----- 1 root operator 0x6a Mar 17 22:35 md1 crw------- 1 root wheel 0x3f Mar 17 22:35 mdctl crw-r----- 1 root kmem 0xe Mar 17 22:35 mem crw-rw-rw- 1 root wheel 0x1e Mar 17 22:35 midistat crw------- 1 root kmem 0x16 Mar 17 22:35 nfslock crw-rw-rw- 1 root wheel 0x10 May 10 18:00 null crw------- 1 root operator 0x50 Mar 17 22:35 pass0 crw-r--r-- 1 root wheel 0x12 Mar 17 22:35 pci crw-rw---- 1 root proxy 0x3b Mar 17 22:35 pf crw------- 1 root wheel 0x35 Mar 17 22:35 ppi0 crw-rw-rw- 1 root wheel 0x13 Mar 17 22:35 ptmx dr-xr-xr-x 2 root wheel 512 May 10 18:00 pts crw-rw-rw- 1 root wheel 0x14 Mar 17 22:35 random cr--r--r-- 1 root wheel 0x4 Mar 17 22:35 sndstat crw------- 1 root wheel 0x20 Mar 17 22:35 speaker lrwxr-xr-x 1 root wheel 4 Mar 17 22:35 stderr -> fd/2 lrwxr-xr-x 1 root wheel 4 Mar 17 22:35 stdin -> fd/0 lrwxr-xr-x 1 root wheel 4 Mar 17 22:35 stdout -> fd/1 crw------- 1 root wheel 0xa Mar 17 22:35 sysmouse crw------- 1 root tty 0x27 May 9 20:55 ttyu0 crw------- 1 root wheel 0x28 Mar 17 22:35 ttyu0.init crw------- 1 root wheel 0x29 Mar 17 22:35 ttyu0.lock crw------- 1 root wheel 0x2d Mar 17 22:35 ttyu1 crw------- 1 root wheel 0x2e Mar 17 22:35 ttyu1.init crw------- 1 root wheel 0x2f Mar 17 22:35 ttyu1.lock crw------- 1 root tty 0x51 May 9 20:55 ttyv0 crw------- 1 root wheel 0x52 Mar 17 22:35 ttyv1 crw------- 1 root wheel 0x53 Mar 17 22:35 ttyv2 crw------- 1 root wheel 0x54 Mar 17 22:35 ttyv3 crw------- 1 root wheel 0x55 Mar 17 22:35 ttyv4 crw------- 1 root wheel 0x56 Mar 17 22:35 ttyv5 crw------- 1 root wheel 0x57 Mar 17 22:35 ttyv6 crw------- 1 root wheel 0x58 Mar 17 22:35 ttyv7 crw------- 1 root wheel 0x59 Mar 17 22:35 ttyv8 crw------- 1 root wheel 0x5a Mar 17 22:35 ttyv9 crw------- 1 root wheel 0x5b Mar 17 22:35 ttyva crw------- 1 root wheel 0x5c Mar 17 22:35 ttyvb crw------- 1 uucp dialer 0x6c Mar 17 22:36 tun1 dr-xr-xr-x 2 root wheel 512 Mar 17 22:35 ufs dr-xr-xr-x 2 root wheel 512 Mar 17 22:35 ufsid crw------- 1 root wheel 0x38 Mar 17 22:35 ufssuspend lrwxr-xr-x 1 root wheel 9 Mar 17 22:35 ugen0.1 -> usb/0.1.0 lrwxr-xr-x 1 root wheel 9 Mar 17 22:35 ugen1.1 -> usb/1.1.0 lrwxr-xr-x 1 root wheel 9 Mar 17 22:35 ugen2.1 -> usb/2.1.0 lrwxr-xr-x 1 root wheel 9 Mar 17 22:35 ugen3.1 -> usb/3.1.0 lrwxr-xr-x 1 root wheel 9 Mar 17 22:35 ugen4.1 -> usb/4.1.0 lrwxr-xr-x 1 root wheel 6 Mar 17 22:35 urandom -> random dr-xr-xr-x 2 root wheel 512 Mar 17 22:35 usb crw-r--r-- 1 root operator 0x3d Mar 17 22:35 usbctl crw------- 1 root operator 0x3e Mar 17 22:35 xpt0 crw-rw-rw- 1 root wheel 0x11 Mar 17 22:35 zeroSteve
-
I just installed the 2.2.2 on to the CF, just trying to figure how to config from the serial… lol
-
I am missing something, I am seeing something boot, but no menu to setup anything?
-
This is getting worse, now it will not get past the bios. It gets stuck on this screen and I am stumped, I thought it was the 2.2.1 image so I downloaded and pushed 2.2 to the CF.
Anyone have a clue?
-
If you are using a new CF card and you're still running BIOS V1.7 (as you are) then you will need to reset the primary master channel to auto so that it detects the card geometry and then change back to CHS H=2.
Alternatively the image may not be on the card correctly, did you extract the image first?Steve
-
Yeah, I have done this 12 times now with the settings for the drive.
I press enter to auto detect the drive, which shows capacity of 8019 MB
I change the IDE channel 0 master mode to manual, access mode to CHS, change heads to 2.
Save and exit yes, reboots and does the mem check…... starts the PCI device listing and gets stuck, now on En?decryption.....
I did extract the image, used Win32diskimager to put the image on the CF.
-
Frustrated…
-
I made some progress…....
Now all I am seeing is this repeatedly.
Timecounter "TSC" frequency 1300076613 Hz quality 800 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 8 ports with 8 removable, self powered (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 de fc ee 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 de fc ee 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 de fc ee 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable -
Figured it out….
set hint.ata.0.mode=PIO4
bootSet up my Wan and Lan and off to the interface to set the rest up!
The issue with the card or getting stuck at the boot, that was due to my installing the bigger CF and running auto detect on that CF. The instructions I was following was not very good, found more and I left the original card in and set manual and 2 hd from that. Booted right away, well until I got the error above.
I really appreciate your help.
-
Ah, interesting. I admit I've not tried an 8GB myself. I guess the presented card geometry is sufficiently different to cause a problem.
Glad you got it sorted.Steve
-
It certainly would seem so, I did not think about it at first, the instructions I was following was not the original and could not remember all of the details to get it working again.
An 8 gig card is really over kill, the 4G does what it says, it Partitions the drive and leaves around 3.7GB unpartitioned on the CF, maybe use that later as a swap drive or something.
So glad it is up and running, I still have not looked to make sure the correct directories are on the CF….. Best look into that before getting too excited huh. lol.
-
Look what I have :)
$ df -hi
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/ufs/pfsense0 1.8G 190M 1.5G 11% 5.8k 237k 2% /
devfs 1.0K 1.0K 0B 100% 0 0 100% /dev
/dev/ufs/cf 49M 89K 45M 0% 23 6.5k 0% /cf
/dev/md0 38M 584K 35M 2% 100 5.5k 2% /tmp
/dev/md1 58M 19M 34M 36% 148 8.0k 2% /var
devfs 1.0K 1.0K 0B 100% 0 0 100% /var/dhcpd/dev
