Update questions

johnpoz

you shouldn't have to put anything in the dropdown.

Why did you not get a response from 127.0.0.1?

To be honest that should really be the only dns in pfsense setup unless your not running resolver or forwarder on pfsense. And if that is the case that entry should be removed.

dnslookup.png_thumb

BlazeStar

@johnpoz:

you shouldn't have to put anything in the dropdown.

Why did you not get a response from 127.0.0.1?

To be honest that should really be the only dns in pfsense setup unless your not running resolver or forwarder on pfsense. And if that is the case that entry should be removed.

It happened when I set up a proxy server with pfSense.

I was getting terrible speeds and so on this forum it was recommended to me to add the DNS servers from my connection to the "Use alternate DNS-servers for the proxy-server" box in the config for SQUID.

I did that and since then it works perfect!

Can this be a problem in regards to the update?

johnpoz

Yeah that suggestion makes no sense.. So your dns you were using sucked? Again if your not running resolver or forwarder than pointing to loopback 127 is pointless. Are you running forwarder or resolver - then why did it not answer?

on pfsense shell query updates.pfsense.org

[2.2.2-RELEASE][root@pfSense.local.lan]/root: drill updates.pfsense.org
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 43659
;; flags: qr rd ra ; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; updates.pfsense.org. IN A

;; ANSWER SECTION:
updates.pfsense.org. 600 IN A 208.123.73.82
updates.pfsense.org. 120 IN A 162.208.119.39

;; AUTHORITY SECTION:

;; ADDITIONAL SECTION:

;; Query time: 115 msec
;; SERVER: 127.0.0.1
;; WHEN: Thu May 21 06:17:03 2015
;; MSG SIZE rcvd: 69
[2.2.2-RELEASE][root@pfSense.local.lan]/root:

doktornotor

With proxy junk, every cryptic issue makes "sense".

BlazeStar

@doktornotor:

With proxy junk, every cryptic issue makes "sense".

So what… I should use a proxy?

I need to do content filtering and such... how can I do that then?

@johnpoz:

Yeah that suggestion makes no sense.. So your dns you were using sucked? Again if your not running resolver or forwarder than pointing to loopback 127 is pointless. Are you running forwarder or resolver - then why did it not answer?

on pfsense shell query updates.pfsense.org

[2.2.2-RELEASE][root@pfSense.local.lan]/root: drill updates.pfsense.org
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 43659
;; flags: qr rd ra ; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; updates.pfsense.org. IN A

;; ANSWER SECTION:
updates.pfsense.org. 600 IN A 208.123.73.82
updates.pfsense.org. 120 IN A 162.208.119.39

;; AUTHORITY SECTION:

;; ADDITIONAL SECTION:

;; Query time: 115 msec
;; SERVER: 127.0.0.1
;; WHEN: Thu May 21 06:17:03 2015
;; MSG SIZE rcvd: 69
[2.2.2-RELEASE][root@pfSense.local.lan]/root:

[2.1.5-RELEASE][root@pfSense.BlazeStar.lan]/root(3): drill updates.pfsense.org
drill: Command not found.

doktornotor

You need to use content filtering for pfSense itself? Really? What for?

Regarding drill, this is present on 2.2.x. On 2.1.x, kindly use dig.

johnpoz

drill is part of unbound I thought, I don't recall having to install that on psfsense. Oh your only on 2.1.5

So you don't have the resolver, so your only forwarding, or seems your not since you got not answer from 127.0.0.1 in your previous.

Use the host command then..

[2.2.2-RELEASE][root@pfSense.local.lan]/root: host updates.pfsense.org 127.0.0.1
Using domain server:
Name: 127.0.0.1
Address: 127.0.0.1#53
Aliases:

updates.pfsense.org has address 208.123.73.82
updates.pfsense.org has address 162.208.119.39
updates.pfsense.org has IPv6 address 2610:160:11:11::82
updates.pfsense.org has IPv6 address 2610:1c1:3::109

doktornotor

Setting the proxy clearly does not work properly on 2.1.x, as an example: https://redmine.pfsense.org/issues/3789

Exclude your pfSense from any shitty proxying and you won't have issues.

johnpoz

so your setting a proxy in pfsense - here?

proxypf.png_thumb

BlazeStar

Okay so sorry for being such a n00b maybe I didn't express myself correctly.

First of all, i performed a manual firmware upgrade by downloading the update file from pfsense.org
So that's that.
Now I'm up to date.

However, after the reboot, I've been getting these errors :

Crash report begins.  Anonymous machine information:

amd64
8.3-RELEASE-p16
FreeBSD 8.3-RELEASE-p16 #0: Mon Aug 25 08:27:11 EDT 2014     root@pf2_1_1_amd64.pfsense.org:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.8

Crash report details:

PHP Errors:
[21-May-2015 16:53:32 Canada/Eastern] PHP Fatal error:  Class 'SQLite3' not found in /etc/inc/captiveportal.inc on line 1334
[21-May-2015 16:53:50 Canada/Eastern] PHP Fatal error:  Class 'SQLite3' not found in /etc/inc/captiveportal.inc on line 1334
[21-May-2015 16:54:12 Canada/Eastern] PHP Fatal error:  Class 'SQLite3' not found in /etc/inc/captiveportal.inc on line 1334
[21-May-2015 16:54:52 Canada/Eastern] PHP Fatal error:  Class 'SQLite3' not found in /etc/inc/captiveportal.inc on line 1334

Filename: /var/crash/minfree
2048

Good news is I don't use the captive portal (yet) this was just a test which I could never get to work.

I'd still like to repair that.

I'm also getting those "notices" :

05-21-15 16:56:29	[ There were error(s) loading the rules: pfctl: DIOCADDRULE: Operation not supported by device - The line in question reads [0]: ]

Finally, I am still unable to see potential upgrades from the dashboard:

Version	
2.2.2-RELEASE (amd64) 
built on Mon Apr 13 20:10:22 CDT 2015 
FreeBSD 8.3-RELEASE-p16

Unable to check for updates.

Second topic, what I was referring to when talking about a proxy was not that I use an external proxy to access the internet from pfSense.
I installed the Squid3 packages to create a proxy on pfSense.
The goal is that I want to do content filtering on my LAN.
To block sites like Facebook, YouTube and so on.

Now @doktornotor when you refer to "shitty proxying" are you saying I should NOT use SQUID3 on pfSense?
Why?