PfSense 2.2 crashes (hard) when accessing Web Configurator from remote IPsec VPN
-
Exact same issue here on a Sokeris net6501. Does anyone know if this is in the bug tracker? I had a look but couldn't see it.
-
Just completed the upgrade to 2.2.1.
The issue is still there. Accessing the webUI while connected over IPSec VPN will crash the box.
-
https://redmine.pfsense.org/issues/4537
-
Could you all test by setting net.inet.ipsec.directdispatch to 0 as ermal outlined in this post? I believe this is all the same issue
-
I think I ran into the same problem (2.2.1-RELEASE on AMD G-T40E) and submitted a few crash dumps.
I set net.inet.ipsec.directdispatch to 0 and have not had another crash since then.
-
I have the exact same issue, my remote pfsense instantly crashes when I access it via remote ip. if I remote desktop to the server on the local network, I can access the box, but using ipsec and accessing the box from a different subnet the box crashes. I removed all squid and squid guard rebooted and It still crashes.
-
Nambi, did you try the fix that georgeman suggested??
-
I'm not too sure how to enter in that command.
do i add this into this the "Execute Shell command"
net.inet.ipsec.directdispatch=0I entered this in there, but when I remote connected it still crashed I probably didn't put it in properly.
Thanks for the assistance.
-
I'm not too sure how to enter in that command.
System - Advanced - System Tunables
-
Thank you, there was no entry so i added "net.inet.ipsec.directdispatch" and set it to 0 and this fixed the issue.
Thanks for your patience.
-
Go to System, Advanced and enter it as a tunable. Reboot just in case and test again
Are you on 32-bit??
-
yes we are running 32 bit, ,my system is capable for 64 bit, but I installed pfsesne a while back when 32 bit was the norm.
-
Alright, it is confirmed to be the same issue then, thanks
-
