Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Sarg package for pfsense

    pfSense Packages
    99
    467
    434.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      aityahiaidir
      last edited by

      for who have this error even after creating symlink /usr/local/sarg-reports to /usr/pbi/sarg-i386/local/sarg-reports /usr/local/sarg-reports or /usr/pbi/sarg-amd64/local/sarg-reports /usr/local/sarg-reports depending on the version you have installed

      Error: Could not find report index file.
Check and save sarg settings and try to force sarg schedule.

      you certainly chosen SquidGuard as proxy server in Sarg general report setting (with Squid it's work fine).

      after some debug,i noticed that Sarg is looking for SquidGuard config file  in the below location

      /usr/pbi/squidguard-i386/etc/squidguard/squidGuard.conf

      but the conf file is located in an other folder

       /usr/pbi/squidguard-i386/local/etc/squid/squidGuard.conf

      for this Srag break generating index report, even if you try to change the folder in the Sarg configuration file, it will always set to the wrong one after each saving Sarg configuration.

      i wil tryed to fixe that with symlink but it's dont work,

      1 Reply Last reply Reply Quote 0
      • R
        robatwork
        last edited by

        I too am having problems with sarg reports, but having looked at this thread I can't see an identical issue - realtime report is OK but normal reports aren't generated, in syslog I get

        php-fpm[68742]: /pkg_edit.php: The command 'export LC_ALL=C && /usr/pbi/sarg-amd64/bin/sarg -d `date +%d/%m/%Y' returned exit code '2', the output was ''

        In SSH I get

        export: Command not found.

        Sarg is 2.3.9 v0.6.4 and pfsense is 2.2.1 (amd64) ie. both the latest.

        Any ideas?

        thanks

        1 Reply Last reply Reply Quote 0
        • R
          robatwork
          last edited by

          Forget that. It was the wrong close quote mark ie should have been:
          date +%d/%m/%Y

          more dumb questions coming soon.

          Oh and add me to the "me too" people who had to do the link command ln -s to get this to work

          1 Reply Last reply Reply Quote 0
          • J
            jabo53
            last edited by

            I can't seem to get the report feature to work.  Error:
            Error: Could not find report index file.
            Check and save sarg settings and try to force sarg schedule.
            have forced updates etc… but no help.  I know it can generate them in the cli by running sarg -x and then if I go into the tmp directory I can see them and read them, however the index file is not being created.
            I believe the conf file is correct but

            TAG: index yes|no|only

            #      Generate the main index.html.
            #      only - generate only the main index.html

            index yes

            TAG: index_tree date|file

            #      How to generate the index.

            index_tree file

            TAG:  output_dir

            #      The reports will be saved in that directory
            #      sarg -o dir

            output_dir /usr/local/sarg-reports

            any useful info would be appreciated
            System
            2.2.1-RELEASE (amd64)
            built on Fri Mar 13 08:16:49 CDT 2015
            FreeBSD 10.1-RELEASE-p6
            Squid3 -3.4.10_2 pkg 0.2.7
            Sarg 2.3.9 pkg v.0.6.4

            1 Reply Last reply Reply Quote 0
            • KOMK
              KOM
              last edited by

              Did you try the symlink fix shown abpve?

              1 Reply Last reply Reply Quote 0
              • J
                jabo53
                last edited by

                I have the same problem
                "Error: Could not find report index file.
                Check and save sarg settings and try to force sarg schedule."

                I can view the realtime with no problem though.

                It appears the reports are being generated but to:
                "/usr/pbi/sarg-amd64/local/sarg-reports"

                I checked the conf file and the report path is: /usr/local/sarg-reports
                Tried changing it to:"/usr/pbi/sarg-amd64/local/sarg-reports" but no difference.
                Tried creating symb link from "/usr/pbi/sarg-amd64/local/sarg-reports" to /usr/local/sarg-reports with the direction from another post in this thread and yes the reports were there but still the the same error message.

                I can see I am not the only one with this issue but I have not seen a real solution yet.  Is this a bug with squid3 dev or a problem with sarg?

                Do I need to manually put in some type of integration parameters as squidguard puts in for itself?

                Or if someone has the info on how to configure sarg to send the reports via email that would be good also.

                Jabo

                1 Reply Last reply Reply Quote 0
                • J
                  jabo53
                  last edited by

                  @KOM:

                  Did you try the symlink fix shown abpve?

                  Yes I did, see here
                  https://forum.pfsense.org/index.php?topic=47765.msg511144#msg511144

                  Thanks
                  Jabo

                  1 Reply Last reply Reply Quote 0
                  • S
                    sujyo1
                    last edited by

                    Here is my Sarg in action!! In system log no sarg error and date is correct when i force update sarg reports but In Sarg View reports and Sarg real time are showing old reports!!

                    2.1.5-RELEASE (i386)
                    built on Mon Aug 25 07:44:26 EDT 2014
                    FreeBSD 8.3-RELEASE-p16

                    Intel(R) Atom(TM) CPU N280 @ 1.66GHz
                    2 CPUs: 1 package(s) x 1 core(s) x 2 HTT threads

                    $ squid -v
                    Squid Cache: Version 2.7.STABLE9

                    Sarg 2.3.6_2 pkg v.0.6.3

                    SYSTEM LOG:

                    Apr 18 02:00:00 php: sarg.php: Sarg: force refresh now with -d date +%d/%m/%Y-date +%d/%m/%Y args, compress(on) and none action after sarg finish.

                    Apr 18 01:17:47 php: /pkg_edit.php: Sarg: force refresh now with -d date +%d/%m/%Y-date +%d/%m/%Y args, compress(on) and none action after sarg finish.
                    Apr 18 01:17:47 check_reload_status: Syncing firewall
                    Apr 18 01:17:40 php: /pkg_edit.php: Sarg: force refresh now with -d date +%d/%m/%Y-date +%d/%m/%Y args, compress(on) and none action after sarg finish.

                    SARG VIEW REPORT:

                    Squid User Access Report
                    FILE/PERIOD CREATION DATE USERS BYTES AVERAGE
                    2015Mar23-2015Mar23 Mon Mar 23 23:00:24 2015 3 58,608 19,536
                    2015Mar22-2015Mar22 Sun Mar 22 23:00:27 2015 18 4,130,379,537 229,465,529
                    2015Mar21-2015Mar21 Sat Mar 21 23:00:33 2015 37 3,529,371,665 95,388,423
                    2015Mar20-2015Mar20 Fri Mar 20 23:00:28 2015 32 3,079,436,066 96,232,377
                    2015Mar19-2015Mar19 Thu Mar 19 23:00:29 2015 19 4,513,906,771 237,574,040
                    2015Mar18-2015Mar18 Wed Mar 18 23:00:26 2015 17 2,775,934,852 163,290,285
                    2015Mar17-2015Mar17 Tue Mar 17 23:00:24 2015 19 1,386,602,417 72,979,074
                    2015Mar16-2015Mar16 Mon Mar 16 23:00:23 2015 15 1,118,870,024 74,591,33

                    SARG REALTIME:

                    DATE/TIME IP/NAME USERID TYPE ACCESSED SITE
                    2015-03-23 00:13 10.10.10.171 - GET captive.apple.com
                    2015-03-23 00:09 10.10.10.33 - GET i.ytimg.com
                    2015-03-22 23:59 10.10.10.171 - GET captive.apple.com
                    2015-03-22 23:59 10.10.10.33 - GET safesecuredownload.com
                    2015-03-22 23:59 10.10.10.33 - GET gomotrak.com

                    1 Reply Last reply Reply Quote 0
                    • F
                      firetxelo
                      last edited by

                      @KOM:

                      Try this from the shell:

                      rm -r /usr/local/sarg-reports
                      ln -s /usr/pbi/sarg-i386/local/sarg-reports /usr/local/sarg-reports

                      Use ln -s /usr/pbi/sarg-amd64/local/sarg-reports /usr/local/sarg-reports if you have 64-bit build.

                      This fix the problem… try it

                      Att,

                      Marcelo Moraes

                      http://mmoraessolucoes.com.br

                      1 Reply Last reply Reply Quote 0
                      • V
                        VictorCheng
                        last edited by

                        @marcelloc:

                        @namek:

                        Hello, Is it possible to change the unit from bytes to something higher? like KB or MB?

                        Sure. :)

                        Just select Show values in reports using abbreviation on sarg general tab.

                        Hello, I no longer see the Show values options in Sarg (pfSense 2.2.2, Sarg 0.6.4). I see nothing like that on the General tab.
                        On the Users tab I can select User Sort Field: BYTES(default), SITE normal, CONNECT and TIME.
                        I want to display Sarg reports in Megabytes instead of Bytes.
                        Help anyone?

                        1 Reply Last reply Reply Quote 0
                        • R
                          Requiring
                          last edited by

                          @firetxelo:

                          @KOM:

                          Try this from the shell:

                          rm -r /usr/local/sarg-reports
                          ln -s /usr/pbi/sarg-i386/local/sarg-reports /usr/local/sarg-reports

                          Use ln -s /usr/pbi/sarg-amd64/local/sarg-reports /usr/local/sarg-reports if you have 64-bit build.

                          This fix the problem… try it

                          thank's its work on my pfsense…. ;) ;) ;)

                          1 Reply Last reply Reply Quote 0
                          • R
                            robatwork
                            last edited by

                            Hello all,

                            My sarg installation is in a bit of a mess. Rather than trying to fix what I think are multiple issues, I want to completely remove sarg including any logs and settings, and install it again from scratch.  I have tried an uninstall but this doesn't get rid of everything.  Any simple pointers on how to nuke sarg totally?
                            thanks!

                            1 Reply Last reply Reply Quote 0
                            • A
                              aGeekhere
                              last edited by

                              I get the same sarg error

                              Error: Could not find report index file.
Check and save sarg settings and try to force sarg schedule.

                              Has a fix been found yet?

                              Never Fear, A Geek is Here!

                              1 Reply Last reply Reply Quote 0
                              • S
                                sujyo1
                                last edited by

                                did try all but same here…

                                Jun 10 02:00:00 php: sarg.php: Sarg: force refresh now with -d date +%d/%m/%Y-date +%d/%m/%Y args, compress(on) and none action after sarg finish.

                                Error: Could not find report index file.
                                Check and save sarg settings and try to force sarg schedule.

                                1 Reply Last reply Reply Quote 0
                                • D
                                  ddimick
                                  last edited by

                                  @KOM:

                                  Try this from the shell:

                                  rm -r /usr/local/sarg-reports
                                  ln -s /usr/pbi/sarg-i386/local/sarg-reports /usr/local/sarg-reports

                                  Use ln -s /usr/pbi/sarg-amd64/local/sarg-reports /usr/local/sarg-reports if you have 64-bit build.

                                  Fixed for me as well, had to perform on a brand new install.

                                  1 Reply Last reply Reply Quote 0
                                  • P
                                    paracetamol
                                    last edited by

                                    Hi,
                                    My SARG schedule work  half time:
                                    First schedule is ok
                                    Second run i have this error:

                                    SARG: Period: 24 Dec 2015
                                    SARG: File /usr/local/sarg-reports/2015/12/24 already exists, moved to /usr/local/sarg-reports/2015/12/24.2
                                    SARG: cannot open /usr/local/sarg-reports/2015/12/24/sarg-date for writing
                                    SARG:: No such file or directory

                                    third run is OK

                                    Have you an idea ??

                                    Thanks

                                    1 Reply Last reply Reply Quote 0
                                    • marcellocM
                                      marcelloc
                                      last edited by

                                      Select overwrite reports on settings tab.

                                      Treinamentos de Elite: http://sys-squad.com

                                      Help a community developer! ;D

                                      1 Reply Last reply Reply Quote 0
                                      • J
                                        jadog
                                        last edited by

                                        Can anybody tell me if it would be possible to setup Sarg to email the the reports in a viewable format? Maybe some sort of a cron job could do this?

                                        1 Reply Last reply Reply Quote 0
                                        • A
                                          Angel_19
                                          last edited by

                                          Hi

                                          pfSense 2.2.6
                                          I received the following error message:

                                          php: sarg.php: The command 'export LC_ALL=C && /usr/pbi/sarg-i386/bin/sarg ' returned exit code '1', the output was 'SARG: Records in file: 1732, reading: 0.00%^MSARG: cannot open /usr/local/sarg-reports/2016/03/21/sarg-date for writing SARG:: No such file or directory SARG: Records in file: 1732, reading: 100.00%'

                                          What could be the problem?

                                          1 Reply Last reply Reply Quote 0
                                          • N
                                            Nytridr
                                            last edited by

                                            Its been discontinued.

                                            https://forum.pfsense.org/index.php?topic=110405.msg614621#msg614621

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post