Boot Issue After upgrading from 2.1.5 to 2.2

ramymamlouk

I think I have already tried playing around with the LBA mode. One of my attempts was to disable the hard drive from the BIOS completely, and attempt to install on a USB thumbdrive, which also failed.

An interesting attempt though, is that I tried booting off a nano-bsd image placed on a USB drive, while the hard drive disabled from the BIOS, which also failed.

Could it be anything to do with the GPT partitioning that FreeBSD 10.1 uses by default?

HandleX

Did you read this solution: [ https://forums.freebsd.org/threads/error-19-on-boot-from-usb-after-8-2-9-0-upgrade.30254/#post-173564 ]?

It seems to be with old devices/BIOS etc.

stephenw10

Nope hadn't tried that. Not confirmed in the linked thread though. However it does sound like something that could potentially solve a number of open threads here. Thanks. :)

Steve

kaioh

Hi,
I Just had the error 19 problem and I solved it by booting with

ufs:/dev/ada0s1a

Thanks for the support.

Unfortunately, I'm using a XenServer box (dit not snapshot :( ) so the nics changed name and now I have a long long night for reconfigure all the settings (about 10 nics)

How about making the boot settings change permanent? Where should I look and edit configs?

stephenw10

Any setting you make at the bootloader prompt can be added to /boot/loader.conf.local to make it permanent. Create that file if it doesn't exis.

Steve

kaioh

@stephenw10:

Any setting you make at the bootloader prompt can be added to /boot/loader.config.local to make it permanent. Create that file if it doesn't exis.

Steve

Thanks for your reply, I looked at the files inside /boot but did not find "ad0s1a" to change it to "ada0s1a"

stephenw10

Ah, sorry I misunderstood.
If that's a full install then just make the change in /etc/fstab

Steve

kaioh

Oh, my head! ;D

Did not just think about it, soo tired.

Thank you!

andrew867

@ramymamlouk:

I don't think I can since I reverted back to 2.15. However, here are snipets from dmidecode hoping it would help:

System Information
Product Name: HP Compaq dc5750 Small Form Factor

Base Board Information
Manufacturer: Hewlett-Packard
Product Name: 0A64h

Processor Information
Version: AMD Athlon 64 X2 Dual Core Processor 3800+

I'm working with the same machine and found that changing the system to 'Native Mode IDE' in the BIOS (Storage->Storage Options->SATA Emulation) and changing /etc/fstab to ada0s1a allows the machine to start working normally again.

Hopefully this helps other people using legacy HP PCs!

-Andrew

briankelly63

I have an older HP PC that would not boot after the upgrade to 2.2. After trying many suggestions I'll confirm that turning off packet mode during the install process (not quick install) solved the issue….

sunghost

Hope i can jump into this Topic. I actually want to install pfs on astaro 110/120 from cd-rom and got same message with disk ad0s1a. where can i change to da0s1a?

sunghost

any hint to do a successfull installation with above error message for wrong disk?

stephenw10

Where in the install process are you getting stuck?
How is the CD-ROM drive connected?

Steve

sunghost

Hi stephenw10,
the cd-rom is connected via usb2 port of the box.
On screen:
loading boot/kernel/kernel text=…data=...syms=...
fast scrolling ?!
loading usb ports with external keyboard
next loading usb -> cd-rw ... serial number ... transfers ... cd present 102493x2048 byte records
quirks=0x10<10_byte_only>

thats it, after press enter i see panic: mountroot: unable to remount root ... panic ... command line on which help shows from hd_dump to x commands

does this help?

stephenw10

Ok, if you're booting from USB did you try choosing 'boot from USB' at the boot menu?

Steve

sunghost

Sorry Steve, where do you mean in detail at the boot menu? Bios or pfSense Menu? Bios, yes because i still boot from cd. pfSense, i cant find any option to expliciet say this is a boot from cd? My problem is, that i boot form usb cd-rom with live-cd installer and want to install pfsense x86 on astaro 110/120. As the kernel loads and the devices are recognized i got the error like the thread creator with wrong disk-device-name. Solution should to change the name to ada0s1a, but i dont where to say this at installation process.

sunghost

Any new idea?

stephenw10

When you boot from the CD (or a USB flash drive) after the bootloader you reach a boot menu with a list of options. One of them is 'boot from USB'. It sets a delay to give the USB device time to initialise before trying to mount root.
See: https://doc.pfsense.org/index.php/Boot_Troubleshooting#Booting_from_USB

Steve

sunghost

Hello,
sorry but on my Welcome to pfSense Boot-Menu i have:
1 - boot multi..
2 - boot single..
3 - escape to …
4 - reboot

options
5 - kernel...
6 - configure boot ...

as you see and not like in the documents there is no option for boot from usb, but i tried the set boot kernel option and so the installation goes on.
thx for the hint to the docs ;)

stephenw10

Hmm, odd.
Well glad you got past it anyway.

Steve