Successful Install on Igel 4210 LX Winestra thin client

robi

A quick report that pfSense 2.2-RELEASE works perfectly with this hardware. The VIA Padlock hardware crypto detected.

Tested using the NanoBSD version on a 4GB CF card, and 1GB RAM installed (pfSense-2.2-RELEASE-4g-i386-nanobsd-vga.img.gz)

robi

Quick benchmark with the new 2.2:

86-93 Mbit with NAT
93 Mbit without NAT
33 Mbit OpenVPN
CPU load 60-80%, good results given that the box has one 100Mbps NIC onboard + added an Intel-based 100Mbps dual-nic PCI card.

steve_darcy

hi robi
i also use an igel for pfsense. i found your report about it and bought me one from ebay. i am very satisfied with it. thanks for your helpful texts. i have now with the 2.2 version a little problem. i cant manage to install the mbmon package for temperature readout which you described on page one. it says the package managment tool is not yet installed on my system. if i say yes to fetch and install it it tells me not found. any ideas how i could get it to work?
also i am not sure if 2.2 is working correctly with padlock. under /system/advanced/misc/ there is no Cryptographic Hardware Acceleration Cryptographic Hardware for via padlock?
under ovpn settings Hardware Crypto it doesnt offer via padlock? i seem to recall that this was an option on the last version of pfsense?
i would appreciate it if you could help me with this questions :)

stephenw10

You are doing this?:
https://forum.pfsense.org/index.php?topic=77166.msg420431#msg420431

That worked ok for me though it took a very long time in Nano.

Steve

robi

I think VIA Padlock as a selectable option was removed from 2.2 because it actually can't be turned off, the CPU automatically uses it when crypto tasks are to be done. You can see that VIA Padlock is present on the dashboard.
I've read this somewhere in this forum some weeks ago.

As for the mbmon thing I can't test right now, I'll have a look into this next week.

stephenw10

Just write pfSense Nano onto a CF card and boot that. ;D

Steve

robi

@robi:

Grab a dump from here: CF1_128mb_bak_dump_dd.rar - 82.2 MB

New link on request.

steve_darcy

hi there
is anyone also experiencing troubles after update to 2.2.1? On my igel machines i dont get internet connection after reboot. i use them to tunnel to a pay ovpn service but now i have to restart always manually the ovpn client to get it work. there is no error message in the logs. the only suspicous entry is "device busy".
best regards
steve

robi

Mine works well, but I don't use OpenVPN anymore with them, so I can't reproduce your scenario.

jbiss_ca

Pfsense 2.2.2 is running great, I bought a PATA SSD (KingSpec KDM-44VS.2-004GMS) off eBay that has the 44 pins and now the box is very responsible. Looking to upgrade to 1GB of RAM though.

Would anyone happen to still have the BIOS V:5.07.1B-091208 file? The links to mediafire no longer works and I can't find it anywhere else. I have a Neoware P680 with BIOS V:5.05 that I wanted to update.

Thanks

robi

Grab the v5.07 bios from here: http://data.hu/get/8808062/igelbios.zip

lt1360hp

Robi,

Could you please add a bit more info on how the get the mbmon utility running on the 4210? I have installed the latest version of xmbmon (205.14) from here http://pkg.freebsd.org/freebsd:10:x86:64/latest/All/ and it successfully runs at the command line. The problem I am having I think is modifying functions.inc.php file. I followed your example that you gave earlier in this thread and it seemed to work, but when I rebooted and tried to enter the web interface, it hung at the login screen. i restored from another functions.inc.php file and rebooted and I could then log in, but of course without the temperature.

Any help you could provide.

Here is the code I inserted:

function has_temp() {
	return true;
}

function get_hwtype() {
	return;
}

function get_mbuf($percent=false) {
	$mbufs_output=trim(`/usr/bin/netstat -mb | /usr/bin/grep "mbuf clusters in use" | /usr/bin/awk '{ print $1 }'`);
	list( $mbufs_current, $mbufs_cache, $mbufs_total, $mbufs_max ) = explode( "/", $mbufs_output);
	if ($percent)
		if ($mbufs_max > 0)
			return round(($mbufs_total / $mbufs_max) * 100, 0);
		else
			return "NA";
	else
		return "{$mbufs_total}/{$mbufs_max}";
}

function get_temp() {
	$cpu_temp_from_mbmon=`mbmon -I -T 2 -f 1`;

	return $cpu_temp_from_mbmon;
}

Thanks.

stephenw10

Try using the full path to mbmon as netstat is in the function above.

Do you have mbmon loaded though? I have a feeling it's not in the 10.1 ports tree

Steve

lt1360hp

Sorry but I may have confused you on my code posting.

I posted the entire region from "function has temp… to function get temp" which included function get_mbuf which references the netstat. There were no modifications done on the function get_mbuf area.

To get to the Dashboard, I change the "function has_temp return true" back to "return false" and then comment out the "function get_temp" area. Then the Dashboard loads OK.

The mbmon runs OK from the shell, so I think it is functioning OK. It is only the functions.inc.php that is mucked up I think.

I played around a bit more and here is an error report:

Crash report begins. Anonymous machine information:

i386
10.1-RELEASE-p9
FreeBSD 10.1-RELEASE-p9 #0 57b23e7(releng/10.1)-dirty: Mon Apr 13 20:33:39 CDT 2015 root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_SMP.10

Crash report details:

PHP Errors:
[04-Jun-2015 09:21:10 America/Detroit] PHP Parse error: syntax error, unexpected '' (T_ENCAPSED_AND_WHITESPACE), expecting identifier (T_STRING) or variable (T_VARIABLE) or number (T_NUM_STRING) in /usr/local/www/includes/functions.inc.php on line 197
[04-Jun-2015 09:21:20 America/Detroit] PHP Parse error: syntax error, unexpected '' (T_ENCAPSED_AND_WHITESPACE), expecting identifier (T_STRING) or variable (T_VARIABLE) or number (T_NUM_STRING) in /usr/local/www/includes/functions.inc.php on line 197

Thanks again for any help.

lt1360hp

Playing around some more….I have now got it displaying the temperature on the Dashboard, but it is reporting an error:

Crash report begins. Anonymous machine information:

i386
10.1-RELEASE-p9
FreeBSD 10.1-RELEASE-p9 #0 57b23e7(releng/10.1)-dirty: Mon Apr 13 20:33:39 CDT 2015 root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_SMP.10

Crash report details:

PHP Errors:
[04-Jun-2015 09:41:11 America/Detroit] PHP Fatal error: Call to undefined function get_stats() in /usr/local/www/getstats.php on line 49

Seems to be a syntax error somewhere.

To get the temp to work, I found a missing "" in the line: " $cpu_temp_from_mbmon=mbmon -I -T 2 -c -1`;

lt1360hp

Hmmm… seems to working OK now!

I logged off and then back on and got no errors this time.

Temperature is working now.

Thanks for your help.

temp.JPG_thumb

lt1360hp

One more thing.

I got the latest version of mbmon here:

http://pkg.freebsd.org/freebsd:10:x86:64/latest/All/

It is the file xmbmon-205_14.txz