Portforward to different port not working
-
I've set-up about 10 portforwards but only the ones that map to the same port seem to be working. I've been testing and trying with 1 host but no matter what I try the port won't forward. I've moved the rules on both the Portforward as the Firewall Rules to the top, so no other rules can conflict. But only the 1 on 1 portforward is working (the 4949 forward, see attachment), but not the SSH portforward (1122 to 22). The automatically created firewall rules also seem to be ok (see attachment).
I've been testing from my VPS to see if the port opens but nmap's output is:
PORT STATE SERVICE
1122/tcp filtered availant-mgr
4949/tcp open muninWhat am I doing wrong? Let me know if you need more information so I can add that.
I'm running version 2.2.2 on a dedicated machine with 2 ethernet ports.
-
It works just perfectly fine for loads of people. For starters, I would suggest to simply connect via SSH, instead of messing with nmap.
-
It works just perfectly fine for loads of people. For starters, I would suggest to simply connect via SSH, instead of messing with nmap.
Yes, I've tried just connecting with SSH but it times out. As nmap shows, the port isn't opened/forwarded.
-
Anything in the firewall logs?
-
Nothing :(
-
Well, then I'd say you are hunting ghosts in completely wrong place. Check if there's some SSH listening on HOST_CS and whether it allows connections from outside the LAN. Otherwise, Diagnostics - Packet Capture.
-
Yeah rules look find from first glance.. I would validate that ssh is listening on your host_cs box.. So you can ssh to it from other local machines?
So on 2.2.2 and currently changing ports for forward from 8443 to 443, and that works fine.. And I just duplicated your setup of 1122 to 22 and works just fine from one of my vps.
I would just test with ssh vs nmap as well..
-
Removed all NAT rules and associated firewall rules and rebooted the system. Then I created only the 2 rules for 1122->22 and 4949->4949 again, now it works! The configuration is still the same as on the screenshots I have attached in the first post. So I guess it's solved now 8)