Noob question about NAT

Gas75

Hello,

I have just set up a pfsense box to route all my house traffic and i have a doubt on how to reach the modem (on a separate interface) just for monitorning purpose.
Now i have 1 wan interface which has the public ip address, a LAN interface and an opt lan named MDM where i connect the modem.
The problem is that the modem is working in brige mode so it doesn't have a default gateway set and i want to reach it from my lan subnet.
The subnets are as follows:
LAN: 192.168.0.0/24
MDM: 192.168.10.0/24

Is there a way to have the modem interface mapped to a second ip on 192.168.0.0/24?
I have tried with VIPs and NAT 1:1 but i didn't manage to have the modem interface reachable from LAN.

Thanks in advance

doktornotor

https://doc.pfsense.org/index.php/Accessing_modem_from_inside_firewall

Gas75

Thank you!

That's exactly what i was looking for.

It works fine now