Newbie question on Multi-WAN and Forced Routing
-
Hello,
I am new to pfSense…I have been reading the Multi-WAN docs but can't find/get it to do what I want to do. So here goes...
Two WAN connections. 1 DSL and 1 Point-to-Point Wireless both PPPoE.
I want to route the VoIP traffic only (IAX2 UDP Port 4569) on the P2P WAN and everything else on the DSL WAN.
The Asterisk server is a static IP on the LAN.
Thanks for reading! Any help/hints greatly appreciated.
-
might want to start by explaining what you tried and what it does not not do exactly.
also include some screenshots of your LAN fw rules.
-
Here is an example where I am telling one server to go out another gateway (WAN2 in my case) for all connections. You can do this by port also. Same thing: Port X goes out gateway Y. Profit.
![Screen Shot 2015-07-06 at 8.28.38 PM.png](/public/imported_attachments/1/Screen Shot 2015-07-06 at 8.28.38 PM.png)
![Screen Shot 2015-07-06 at 8.28.38 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2015-07-06 at 8.28.38 PM.png_thumb) -
WAN = DSL for all traffic except VoIP
OPT1 = P2P for only VoIP1) I have OPT1 port forwarding 4569 to 192.168.1.2 This handles the incoming VoIP traffic and this seems to be working.
2) Tried creating a firewall rule to Block LAN source 192.168.1.2 Destination: WAN This only seems to work if the destination is any. I don't understand the difference between WANnet and WANaddress and why these destination don't block with this rule.
-
Thank you! You screenshot was very helpful. I was missing the Gateway in the FW Rule. :)