DNS BIND help to setup.
-
and thats it ?
Try it and see! :D
it wouldnt be sent to a nameserver outside my network or anything ?
No. Unless you have a rule on WAN that allows 53 TCP/UDP in, nobody will see any DNS service on your WAN address. The Forwarder will serve any overrides you have set (even for other valid external domains) to your LAN clients and fetch anything else from the DNS servers you have set in your General config.
-
Lol yearh i can see how that looks :D i did eventually try btw :D
and i failed…......
it didn't worked at all? nothing was happening
-
1. You have no defined DNS servers upstream. This won't solve your immediate problem, but it's something you need to fix if you want the forwarder to handle non-local domains.
2. DNS Forwarder should be bound to localhost, not All.
3. Why is the Listen port set to 54? Leave it blank to use the default DNS port 53.
-
1. This is where a step by step guide or somthing else would be good to have ( I must admit i am totally lost here)
2. is changed to localhost now.
3. it is set to 54 because the DNS resolver is running on port 53 and the DNS forwarder can't run on the same port (error message) -
Why are you running two DNS servers? Nothing will query it on port 54. If you are already running the DNS resolver, then set up the host overrides in the DNS resolver and move on!
-
Again i tam out of knowledge here. ask me to setup a proxy server or anything else and i will do it but i am still in the learning process and DNS is like an unknown country to me.
I have already tried to setup the Host Overrides in DNS Resolver but it isnt working ? ipmi and mysql isn't working but landscape and esxi are ?
-
??? ??? ??? Why are all those hosts in come separate random domain? ??? ??? ???
-
So if my domain under system > General Setup is for an example home. then my domains should be named home ?
and then i could access it with ipmi.home….. :-[thanks man :D i almost feel embarrassed for being so stupid now....
can i ask you what the difference is between resolver and forwareder?
-
So if my domain under system > General Setup is for an example home. then my domains should be named home ?
and then i could access it with ipmi.home….. :-[
[/quote]Well yes, whole lot easier to remember than having random domain for every host, no? ;D
can i ask you what the difference is between resolver and forwareder?
For the purpose discussed here, none. Otherwise, forwarder forwards the queries to usptream DNS servers, the resolver does recursive resolution itself by default.
-
well after i fired up my Esxi whitebox with 6 VM's on it became pretty difficult to remember where the different IPs were leading me too :D so yes
aaaarh :) can i ask you why i was adviced to setup a DNS forwareder instead ?
-
can i ask you why i was adviced to setup a DNS forwareder instead ?
I'll take this one… I stupidly didn't bother to check as to which one you were already running, and I didn't remember that it's the resolver that is the default now in 2.2 and not the forwarder.
-
Well that make sense :) thanks for the your time
