Update failed with HAVP and too small /tmp RAM disk
-
What packages have you installed? Also post the output of
df -h -
Thank you doktornotor.
I downgraded back to pfSense-Full-Update-2.2.3-RELEASE-amd64.tgz and was fine until I tried the upgrade again.
Now I am stuck again relating to my backup configurations?
I did a backup of my configuration before I updated.
The backup xml file saids its version 11.9 which was the first one with the RAM enabled.
I kept doing backups and later xml versions state 11.7.
I am still stuck even though it appears to be booting to version 2.2.3.
Still stopping here while starting 2.2.3 at loading the NTP client.
I was able to earlier downgrade and boot to version 2.2.3 with no issues.
-
Uhm… if you are running out of space in /tmp because you have moved it to ramdisk, then either increase the size considerably, or simply do NOT move things to ramdisk. This really has nothing to do with 2.2.4 nor any other pfSense version.
-
Understood doktornotor.
Yup originally went to 100Mb on /var and /tmp. Its been fine except when I went to update it ran out of space in /tmp.
That said downgrading back to 2.2.3 and it is updating the packages installed with no issues right now.
Console booted up fine just now after the upgrading.
Packages that were installed have been the same now for a while.
Snort3, Squid, HAVP AV and a fail over gateway.
Only change over the last few months has been to use RAM.
I will leave the use of RAM off reboot a couple of times, back up configuration and try the update again….later though as I do not currently want to deal with this...
Thinking it has been only the issue of using RAM and setting it to 100Mb.
CPU, Memory and HD space are all fine. Concerned here about the 100% usage which appears to be not an issue though eh?
$ df -h Filesystem Size Used Avail Capacity Mounted on /dev/ad6s1a 64G 4.9G 54G 8% / devfs 1.0K 1.0K 0B 100% /dev /dev/md0 3.4M 168K 3.0M 5% /var/run devfs 1.0K 1.0K 0B 100% /var/dhcpd/dev /dev/md10 958M 12K 881M 0% /var/tmp/havpRAM procfs 4.0K 4.0K 0B 100% /proc
-
Concerned here about the 100% usage which appears to be not an issue though eh?
$ df -h Filesystem Size Used Avail Capacity Mounted on /dev/ad6s1a 64G 4.9G 54G 8% / devfs 1.0K 1.0K 0B 100% /dev /dev/md0 3.4M 168K 3.0M 5% /var/run devfs 1.0K 1.0K 0B 100% /var/dhcpd/dev /dev/md10 958M 12K 881M 0% /var/tmp/havpRAM procfs 4.0K 4.0K 0B 100% /procdevfs is NOT the issue ;)
-
Rebooted 2.2.3 twice and all is well except for the tickle to update.
Other than shutting off RAM use and backing up my configuration before the update are there any other recommendations suggested?
I understand this is a larger package.
I have not had any issues updating PFSense over the last year or so.
Should I disable or remove any of the packages installed?
It's not a big deal to reconfigure them.
-
Pretty much convinced the issue is due to HAVP. (And, really consider switching to C-ICAP; the HAVP upstream has been dead for years.)
-
Thank you doktornotor.
Removed HAVP.
Rebooted and will try the update again.
-
Thank you doktornotor for your help this morning and changing the title of the OP.
I couldn't wait so updated again. Update worked fine and all is well again.
2.2.4-RELEASE (amd64)
built on Sat Jul 25 19:57:37 CDT 2015
FreeBSD 10.1-RELEASE-p15 -
Glad to hear it, thanks for the follow up. I updated the thread title so the root cause was clear for others looking for potential problem areas.
-
I couldn't wait so updated again. Update worked fine and all is well again.
2.2.4-RELEASE (amd64)
built on Sat Jul 25 19:57:37 CDT 2015
FreeBSD 10.1-RELEASE-p15Good to hear that… ;)
