Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Apcupsd 3.14.10 on pfSense 2.1.5 (amd64)

    Scheduled Pinned Locked Moved pfSense Packages
    21 Posts 5 Posters 8.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      dbaio
      last edited by

      Maybe apcaccess uses all settings (standalone | shareslave | sharemaster)

      $ apcaccess status <my.netops.ip.here>: <port>[snip]
UPSMODE  : ShareUPS Master 
SHARE    : ShareUPS
STATUS   : ONLINE 
[snip]</port></my.netops.ip.here>

      –
      Danilo G. Baio (dbaio)

      1 Reply Last reply Reply Quote 0
      • P
        PARC
        last edited by

        Hi Danilo,

        Thanks for the suggestion. I gave this a try as well, but sadly those changes didn't work either.

        If I can find a similar version of apcupsd I'm going to try installing it on a linux machine behind pfSense to see if this is an issue with this specific version of apcupsd and the net connectivity I'm using.

        Cheers,
        Greg

        1 Reply Last reply Reply Quote 0
        • D
          dbaio
          last edited by

          @PARC:

          Hi Danilo,

          Thanks for the suggestion. I gave this a try as well, but sadly those changes didn't work either.

          If I can find a similar version of apcupsd I'm going to try installing it on a linux machine behind pfSense to see if this is an issue with this specific version of apcupsd and the net connectivity I'm using.

          Cheers,
          Greg

          Thank you for your time.

          I submitted a PR and I asked for build the new binaries (3.14.12).

          Best Regards.

          –
          Danilo G. Baio (dbaio)

          1 Reply Last reply Reply Quote 0
          • M
            mk96
            last edited by

            Actually same here, after a couple of seconds after system start a broadcast appears:
            "Communications with UPS lost"
            My config uses PCNET driver,

            apcupsd.events:

            2015-01-08 22:24:48 +0100  apcupsd FATAL ERROR in newups.c at line 103
Mutex lock failure. ERR=Resource deadlock avoided
2015-01-08 22:24:48 +0100  apcupsd FATAL ERROR in newups.c at line 103
Mutex lock failure. ERR=Resource deadlock avoided
2015-01-08 22:24:48 +0100  apcupsd FATAL ERROR in newups.c at line 103
Mutex lock failure. ERR=Resource deadlock avoided
2015-01-08 22:25:28 +0100  apcupsd 3.14.10 (13 September 2011) freebsd startup succeeded
2015-01-08 22:26:28 +0100  Communications with UPS lost.
2015-01-08 22:32:11 +0100  apcupsd exiting, signal 15
2015-01-08 22:32:11 +0100  apcupsd shutdown succeeded
2015-01-08 22:32:25 +0100  apcupsd 3.14.10 (13 September 2011) freebsd startup succeeded
2015-01-08 22:32:25 +0100  apcupsd exiting, signal 15
2015-01-08 22:32:30 +0100  apcupsd 3.14.10 (13 September 2011) freebsd startup succeeded
2015-01-08 22:33:30 +0100  Communications with UPS lost.
2015-01-08 22:35:33 +0100  apcupsd exiting, signal 15
2015-01-08 22:35:38 +0100  apcupsd 3.14.10 (13 September 2011) freebsd startup succeeded
2015-01-08 22:35:38 +0100  apcupsd exiting, signal 15
2015-01-08 22:35:43 +0100  apcupsd 3.14.10 (13 September 2011) freebsd startup succeeded
2015-01-08 22:36:43 +0100  Communications with UPS lost.

            On the other installation works fine using serial cable, but this one with this strange issue uses an APC MNC2 card AP9631

            1 Reply Last reply Reply Quote 0
            • M
              mk96
              last edited by

              Seems it is solved by adding the IP of the PFsense box to the powerchute clients in the web interface of the AP9631 NMC card

              1 Reply Last reply Reply Quote 0
              • S
                sensemann
                last edited by

                hello,

                I ve the same problem.

                even with the correct config / IP , in the webinterface and  /usr/pbi/apcupsd-amd64/etc/apcupsd/apcupsd.conf  it doenst work, I only get this error:

                /usr/local/sbin: apcaccess

                Error contacting apcupsd @ localhost:3551: Operation timed out

                But this is working:

                apcaccess -h 192.168.2.1:3551

                using apcupsd-3.14.12_1  with pfSense 2.2-R.

                Any ideas?

                1 Reply Last reply Reply Quote 0
                • D
                  dbaio
                  last edited by

                  The command apcaccess tries to connect through many ways(SNMP, PCNET with auth, PCNET without auth and others), seeing the log you can know how it did.

                  You need to check your config on the UPS (pcnet) - PowerChute Network Shutdown.

                  Some tips from apcupsd.com:

                  UPSCABLE ether
UPSTYPE pcnet
DEVICE ipaddr:user:passphrase
UPSCLASS standalone
UPSMODE disable

                  The DEVICE setting specifies the IP address of the UPS as well as the username and authentication passphrase to use. Note th
                  at the username and passphrase are not the Web/SNMP login credentials. They are separate settings. The default username on a new card is "apc" and the default passphrase is "admin user phrase". To change the passphrase, log in to the Web UI and go to the UPS tab, then to PowerChute -> Configuration. (This assumes firmware v3.3.1. Other versions may place the setting elsewhere.) The password must be a minimum of 15 characters long. The web UI will silently ignore shorter passwords and does not give an error message. There is no apparent way to change the username.

                  Note that you may leave DEVICE blank and Apcupsd will accept information from any PCNET UPS on the network, however it will be very insecure since an attacker could easily send packets crafted to cause your server to shut down. Using the ipaddr, user, and passphrase will prevent this behavior.

                  http://www.apcupsd.com/manual/manual.html#powerchute-network-shutdown-driver-pcnet

                  Also, you can add the IP of pfSense box to the powerchute clients in the web interface like @mk96 saied.

                  Regards

                  –
                  Danilo G. Baio (dbaio)

                  1 Reply Last reply Reply Quote 0
                  • S
                    sensemann
                    last edited by

                    hi, I tryd to change "net" to "pcnet" - but it doesnt help. I guess there`s a bug between pfSende web-GUI and apcaccess…

                    1 Reply Last reply Reply Quote 0
                    • D
                      dbaio
                      last edited by

                      @sensemann:

                      hi, I tryd to change "net" to "pcnet" - but it doesnt help. I guess there`s a bug between pfSende web-GUI and apcaccess…

                      You were right, it was improved.

                      https://forum.pfsense.org/index.php?topic=89901.0

                      –
                      Danilo G. Baio (dbaio)

                      1 Reply Last reply Reply Quote 0
                      • P
                        PARC
                        last edited by

                        Hello all,

                        Just wanted to mention that I noticed a new version of the apcupsd package was available; I uninstalled the previous package and installed the new one. That resolved this issue.

                        Hooray!

                        Cheers,
                        Greg

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.