Limiter blocks internet access (Squid transparent proxy)
-
This issue persists on 2.2.2? Oh Crap :(
-
I also noticed this yesterday. After limiters added to pass all rule and logging enabled, the rule blocks all traffic for that interface and fills up the System logs.
-
Your "fills up the System logs" non-issue has nothing to do with the topic here. When you log ALL passed traffic, then yeah, your logs are going to fill up, limiters or not.
-
Hmmm? Not really sure how's this related to unbound, or even any resolver at all? When I put limiters on a NAT firewall rule, the traffic stop flowing. As simple as that.
This should be fixed in 2.2.3 snapshots.
-
Thanks, will test as soon as nanobsd becomes usable again… :D
-
@ermal:
Hmmm? Not really sure how's this related to unbound, or even any resolver at all? When I put limiters on a NAT firewall rule, the traffic stop flowing. As simple as that.
This should be fixed in 2.2.3 snapshots.
I am seeing this problem on 2.2.3-DEVELOPMENT (amd64) built on Fri Jun 19 14:25:29 CDT 2015 FreeBSD 10.1-RELEASE-p13. No traffic with limiter and transparent proxy.
-
Yeah this is still broken. Don't use limiters on NAT.
https://redmine.pfsense.org/issues/4596
https://redmine.pfsense.org/issues/4590 -
Still not working on Pfsense 2.2.3 final release. I need both, limiter and transparent squid proxy to work together for my scenario.
Regards,
Nabeel
-
I have been having this problem also. It's a BIG problem actually for me. Does anyone know if it's been fixed yet, and if not if it's been brought to the developers attention ?
-
Apparently the changes to fix this are significant so they have pushed it to 2.3. I see they're planning a 2.2.5 first so you're looking at months (at least) before limiters are usable again. Use 2.1.5 and hope no significant vulnerabilities appear since they have stated they will not be patched. Or evaluate other options, as I am.
2.2 is, for the most part, useless if you rely on dummynet limiters.
-
-
That's a pretty good question.
I just clicked around and couldn't find a 2.1.5 download.
You might want to start thinking about other products/distros if you can't wait months for the functionality you need.
I <3 pfSense but this limiter shit is getting old.
-
That's a pretty good question.
I just clicked around and couldn't find a 2.1.5 download.
You clicking skills suck. ;D :P
Just click on the "Just show me the mirrors" on the download page. Select one, and go to "old" dir.
-
Didn't see the old dir. Knew it was there somewhere. Thanks.
-
SOLVED*
I managed to find a simple fix. All I needed to do was create a pass all firewall rule on the (LAN) interface for port 3128 (my proxy port).
IPv4 TCP * * * 3128 * none Rule to allow transparent proxy to work
It worked and the speed limiter still works also.
-
SOLVED*
I managed to find a simple fix. All I needed to do was create a pass all firewall rule on the (LAN) interface for port 3128 (my proxy port).
IPv4 TCP * * * 3128 * none Rule to allow transparent proxy to work
It worked and the speed limiter still works also.
anyone else tested this ?
-
SOLVED*
I managed to find a simple fix. All I needed to do was create a pass all firewall rule on the (LAN) interface for port 3128 (my proxy port).
IPv4 TCP * * * 3128 * none Rule to allow transparent proxy to work
It worked and the speed limiter still works also.
anyone else tested this ?
Limiter still not working!
-
I can confirm that the issue solved 100 %
My configuration :
1. Pfsense Version : 2.2.4-RELEASE (amd64)
built on Sat Jul 25 19:57:37 CDT 20152. Packages Installed : A. Squid : 2.7.9 pkg v.4.3.6 ( Do not install squid3 – its very buggy )
b. Squidguard : 1.9.14 -- squid configured as a transparent proxy on lan interface - rest are default settings.3. Memory : 1 GB
4. Bandwidth Available : 4 MB
5. Limiter applies for testing : only to 1 ip ( 256 kb download and 1 mb upload )
6. Result tested with speed.net ( Worked exactly as expected )
7. All test carried when no one else using internet ( doubly confirmed )
Please mark that this issue is fully resolved.
Kudos and special thanks to Alfanetindo for a simple but a great solution.
Steps need to be taken...
1. Following rule must be first rule
IPv4 TCP * * * 3128 * none Rule to allow transparent proxy to work
2. Then you can apply the limiter rule.
-
the order of the actual pf rules must be the issue then, perhaps someone can post the pf rules of working 2.1.5 and not working 2.2.x
-
Not "solved" and the rule change does not "solve" it. Looks like it just bypasses the limiter.
Tried on 2.2.4, squid 3 (what was installed, has not been transparent since I decided that limiter fairness beat the heck out of squid caching if I had to pick only one of those) - traffic limited at 10 and running 10.6 shot above 12, quality shot from 40 to 1500 ms.
Uninstalled squid 3, installed 2.7.9.
Traffic again shot above 12, quality went to 400, then 1200 ms.
Turned off transparent and disabled firewall rule. Traffic remained high, quality low, so I reset states as well to flush it out.
Back to 10.4 and 27 ms.
Guess I'll have to find a second box to run an independent squid instance between pfSense and the rest of the LAN, since this is not remotely working (on older versions I could have both work, but only when cache hits were shaped, which was NOT the point, and the workarounds some claimed to work for that always left me with a locked up system and no network access.
I have been running the limiter (and basically no squid, or only non-transparent squid which is functionally like no squid) since last spring with excellent results on getting fairness while allowing most of the BW to be used (one user gets it all (minus limiter overhead to make the limiter work at all), two users share evenly, 80 users share evenly) and holding quality to a reasonable level.
"Quality to a reasonable level" is basically tuning the main limiters' in/out values that are then divided among users.
