Failed to create RRD graphs
-
i just wanted to check the latency and … no more graphs today as it can be seen in the screenshot.
i have no clue how to fix-it. restart is not accepted now...so it may be restarted manually i guess. -
No idea but, I see 2.2.3 in sig, to say for sure 2.2.4 is the better version…
-
is there a way to delete old logs/cache ?
-
See [Diagnostics: Execute command] ls -al /tmp ?
-
not much about rrd
/root: ls -al /tmp
total 408
drwxrwxrwt 8 root wheel 1536 Aug 2 01:31 .
drwxr-xr-x 26 root wheel 1024 Jul 30 17:54 ..
drwxr-xr-x 2 root wheel 512 Aug 1 00:29 .PBI.13407
drwxr-xr-x 2 root wheel 512 Aug 1 00:28 .PBI.44796
srwxr-xr-x 1 clamav wheel 0 Jul 31 23:50 .dguardianipc
srwxr-xr-x 1 clamav wheel 0 Jul 31 23:50 .dguardianurlipc
drwxrwxr-x 2 root operator 512 Jul 31 23:50 .snap
-rw-rw-rw- 1 root wheel 0 Aug 2 01:31 DDNS0.lock
-rw-rw-rw- 1 root wheel 0 Aug 1 23:50 aliasurl.lock
-rw-r–r-- 1 root wheel 78 Aug 1 00:28 bootup_messages
-rw-r--r-- 1 root wheel 144941 Aug 2 01:03 config.cache
-rw-rw-rw- 1 root wheel 0 Aug 2 01:31 config.lock
-rw-r--r-- 1 root wheel 511 Jul 31 23:50 dhcpd.sh
-rw-rw-rw- 1 root wheel 0 Aug 2 01:31 filter.lock
drwxr-xr-x 7 root wheel 512 Aug 1 00:27 lighttpdcompress
drwxr-xr-x 3 root wheel 512 Jul 31 23:50 mnt
-rw-rw-rw- 1 root wheel 0 Aug 2 01:31 openvpn.lock
-rw-r--r-- 1 root wheel 11 Jul 31 23:50 ovpns1_router
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 ovpns1up
-rw-r--r-- 1 root wheel 118 Aug 1 00:29 pbi_delete_errors.txt
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pfBaddfile
-rw-r--r-- 1 root wheel 14 Aug 2 01:26 pfSense_version
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pfbdeduptemp
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pfbduptemp
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pfbmatchfile
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pfbsyncfile
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pfbtempfile
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pfbtempfile2
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pfbtempmatchfile
-rw-r--r-- 1 root wheel 1776 Aug 2 01:31 pfctl_si_out
-rw-r--r-- 1 root wheel 95979 Aug 2 01:31 pfctl_ss_out
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 php_errors.txt
-rw-r--r-- 1 root wheel 51330 Aug 1 00:29 pkg_info.cache
-rw-r--r-- 1 root wheel 8 Jul 31 23:50 pppoe0_defaultgw
-rw-r--r-- 1 root wheel 7 Jul 31 23:50 pppoe0_defaultgwv6
-rw-r--r-- 1 root wheel 16 Jul 31 23:50 pppoe0_ip
-rw-r--r-- 1 root wheel 15 Jul 31 23:50 pppoe0_ipv6
-rw-r--r-- 1 root wheel 9 Jul 31 23:50 pppoe0_router
-rw-r--r-- 1 root wheel 8 Jul 31 23:50 pppoe0_routerv6
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pppoe0up
-rw-r--r-- 1 root wheel 0 Jul 31 23:50 pppoe0upv6
-rw-rw-rw- 1 root wheel 0 Jul 31 23:50 resolvconf.lock
-rw-r--r-- 1 root wheel 9114 Aug 2 01:31 rules.debug
-rw-r--r-- 1 root wheel 9114 Aug 2 01:31 rules.debug.old
-rw-r--r-- 1 root wheel 107 Aug 2 01:31 rules.limits
-rw-r--r-- 1 root wheel 614 Aug 1 00:28 rules.test.packages
-rw------- 1 root wheel 216 Aug 2 01:31 sess_58b9b497995fc024e4afb17d95728898
-rw-r--r-- 1 root wheel 0 Aug 2 01:31 tmpHOSTS
drwxr-xr-x 2 root wheel 512 Jul 31 23:50 xlsx -
So the system did not make any *.png's store in /tmp with the data in /var/db/rrd ?
-
i got stuff in there:
/var/db/rrd: ls
DMZGW-quality.rrd lan-packets.rrd oltenia-quality.rrd ovpns1-packets.rrd system-mbuf.rrd system-states.rrd wan-traffic.rrd
ipsec-packets.rrd lan-traffic.rrd opt1-packets.rrd ovpns1-traffic.rrd system-memory.rrd updaterrd.sh
ipsec-traffic.rrd ntpd.rrd opt1-traffic.rrd ovpns1-vpnusers.rrd system-processor.rrd wan-packets.rrdwe'll delete all and see
-
If you want to "delete" just go to "Status –> RRD Graphs --> Settings tab" and use the "Reset RRD Data" Button ;)
-
done…that was what i intended.
still have the old data...try to replace and not to loose the reports.
in any case now it seems ok....it does work again. -
During an upgrade you have switched from 32-bit ot 64-bit install (or even from 64-bit back to 32-bit). You should check on the dashboard if ou have 32 or 64 bit, and check in System->Firmware, Updater Settings to see if there is some special or wrong place selected for getting updates.
If you change the 32/64 bit then the old RRD files will not work.