TinyDNS service not able to start in v2.2.3-RELEASE

Itwerx

https://github.com/pfsense/pfsense-packages/pull/909

Did you have a chance to give it any review or was the github just to get it in there for further development…?

doktornotor

https://github.com/pfsense/pfsense-packages/pull/909

Did you have a chance to give it any review or was the github just to get it in there for further development…?

It's been "sitting" there for 2 days. Give it some time to get reviewed and merged…

Itwerx

It's been "sitting" there for 2 days. Give it some time to get reviewed and merged…

Yes, of course, wasn't impugning the process. Just figured if it had been given further review and was considered a valid patch, (not still missing paths or whatever), then I would go ahead and test it out and report back my results. (Conversely if it's known to be incomplete than I'd wait.) - Thanks!

doktornotor

I don't plan on changing anything there unless required. If you want to test it, probably the best way is to paste relevant parts into http(s)://<pfs_ip_or_fqdn>/exec.php


	$pf_version=substr(trim(file_get_contents("/etc/version")),0,3);
	if ($pf_version == "2.2") {
		$svscan_path = "/usr/pbi/djbdns-" . php_uname("m") . "/local/bin/svscan";
		$svc_path = "/usr/pbi/djbdns-" . php_uname("m") . "/local/bin/svc";
		$tinydns_path = "/usr/pbi/djbdns-" . php_uname("m") . "/local/bin";
	} else if ($pf_version == "2.1") {
		$svscan_path = "/usr/pbi/djbdns-" . php_uname("m") . "/bin/svscan";
		$svc_path = "/usr/pbi/djbdns-" . php_uname("m") . "/bin/svc";
		$tinydns_path = "/usr/pbi/djbdns-" . php_uname("m") . "/bin";
	} else {
		$svscan_path = "/usr/local/bin/svscan";
		$svc_path = "/usr/local/bin/svc";
		$tinydns_path = "/usr/local/bin";
	}
	$svscan = <<<eod<br>#!/bin/sh
# PROVIDE: svscan
# REQUIRE: LOGIN
# KEYWORD: FreeBSD
. /etc/rc.subr
name="svscan"
rcvar="\${name}_enable"
command="{$svscan_path}"
svscan_enable=\${svscan_enable-"YES"}
svscan_servicedir=\${svscan_servicedir-"{$g['varrun_path']}/service"}
logdir="/var/log/svscan"
start_cmd="svscan_start"
stop_postcmd="svscan_stop_post"
load_rc_config \$name
required_dirs="\${svscan_servicedir}"
svscan_start () {
        echo "Starting svscan."
        mkdir -p \$logdir
        /usr/bin/env \
        PATH={$tinydns_path}:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin \
        /usr/sbin/daemon -f /bin/sh -c "\$command \$svscan_servicedir 2>&1 | /usr/local/bin/multilog t \$logdir" > /dev/null
EOD;
if ($enableipmonitoring) {
	$svscan .= <<<eod<br>/usr/local/bin/minicron {$refreshinterval} {$g['varrun_path']}/ping_hosts.pid "/usr/local/bin/ping_hosts.sh"
EOD;
}
$svscan .= <<<eod<br>}
svscan_stop_post () {
        echo "Stopping svscan."
        find -L "\$svscan_servicedir" -mindepth 1 -maxdepth 2 -type d \( \! -path "\$svscan_servicedir/*/*" -or -name 'log' \) -print0 | xargs -0 {$svc_path} -dx
		/bin/pkill -F /var/run/ping_hosts.pid
}
run_rc_command "\$1"
EOD;

	fwrite($fd, $svscan);
	fclose($fd);</eod<br></eod<br></eod<br>

After that, make a backup and replace /usr/local/pkg/tinydns.inc with the fixed one.</pfs_ip_or_fqdn>

ecce

Thank you, Doktor!

For sending a patch in the right direction, and for posting a How-To how we can try it.

Worked out with minor additions in your above posted code:

an additional line break here:

       /usr/local/bin/minicron {$refreshinterval} {$g['varrun_path']}/ping_hosts.pid "/usr/local/bin/ping_hosts.sh"
EOD;
}
$svscan .= <<<eod<br>--->>>line break here<<<---
}
svscan_stop_post () {</eod<br>

an additional line before fwrite (had to instant-teach myself a little bit php for this :)):

$fd=fopen("/usr/local/etc/rc.d/svscan.sh","w");

and after that edit /usr/local/etc/rc.d/svscan.sh and remove all ^M chars at the end of the line. (yes, I know…windoze)

Again, thanks!
Marc

doktornotor

@ecce:

and after that edit /usr/local/etc/rc.d/svscan.sh and remove all ^M chars at the end of the line. (yes, I know…windoze)


sed -i "s/.$//g" /some/file

Itwerx

Am I correct in assuming this snippet of code is sufficiently self-contained that it can go pretty much anywhere in exec.php, (not literally of course, being careful not to break existing syntax)…?

doktornotor

PR merged, no longer needed to mess with anything manually.

Itwerx

Thanks Doc, that was fast!

I did a reinstall on the package, and while I don't see any of the new svscan stuff in the exec.php I am happy to report that it seems to be running properly now. Woohoo! Much rockage! :P

ecce

Yes, can confirm that - installed it on a system which didn't have anything to do with tinydns before, configured basic settings, started svscan and that was it!

Yay!
;D

doktornotor

Thanks for testing. ;)