Intel Mini-ITX Atom 8-core Hardware Build Recipe Available Here
-
Anyone know if it is recommended to do a full install on a USB 3.0 flash drive?
On an USB Stick I would prefer to install the Memstick NanoBSD version.
But with an SSD you are really able to do a full install as you have enough space for all
as I see it right!And if you want to go with an internally other drive for the most mainboards from Supermicro
are some SSD-DOM or SATA-DOMs out, that is then more something like an install medium
and not even outside plugged in as an USB Stick. -
Just ordered all my parts! Here is a complete list of every single item I ordered. Your total price might not add up to mine since I had a couple promo codes here and there.
Motherboard/CPU (Supermicro A1SRI-2758F-O) http://www.amazon.com/gp/product/B00FM4M7TQ?psc=1&redirect=true&ref_=od_aui_detailpages00
SSD (SanDisk SSD 120GB) http://www.newegg.com/Product/Product.aspx?Item=N82E16820173071
6" 4-Pin Molex to SATA Power Cable http://www.newegg.com/Product/Product.aspx?Item=N82E16812200061
RAM (Kingston 8GB ECC Unbuffered SODIMM) http://www.newegg.com/Product/Product.aspx?Item=N82E16820239702
PowerSupply (150W 12V 12.5A AC-DC Power Adapter) http://www.ebay.com/itm/130478987672
Sleeved ATX 4-Pin P4 Extension Cable http://www.amazon.com/gp/product/B00E6QK5N6?psc=1&redirect=true&ref_=od_aui_detailpages00
Case (Mini-Box M350) http://www.amazon.com/gp/product/B005TX3LA4?psc=1&redirect=true&ref_=od_aui_detailpages00
HDD Mounting Bracket for M350 (for 2 extra fans) http://www.amazon.com/gp/product/B007HEN2W0?psc=1&redirect=true&ref_=od_aui_detailpages00
Fans (3x Evercool EC4015SH12BP 4-Pin PWM Fans) http://www.directron.com/ec4015sh12bp.html
Fan Screws (3x Sets of Screws) http://www.directron.com/fanscrews.htmlTotal: $593.69 Shipped
-
Total: $593.69 Shipped
Wow, go with it, this would be a really fast pfSense box as I see it right!
- Enable the TRIM support in pfSense if not automatically done during the installation
- Enable PowerD "high adaptive"
The RAM I would try out as 2 x 4 GB or 2 x 8 GB ECC RAM and not only one module
- perhaps if you go with 2 x 8 GB ECC RAM I would try up to tune the mbufs numbers
But all in all this is a very fast machine and you will be happy with it as I see it right!
-
@BlueKobold:
Total: $593.69 Shipped
Wow, go with it, this would be a really fast pfSense box as I see it right!
- Enable the TRIM support in pfSense if not automatically done during the installation
- Enable PowerD "high adaptive"
The RAM I would try out as 2 x 4 GB or 2 x 8 GB ECC RAM and not only one module
- perhaps if you go with 2 x 8 GB ECC RAM I would try up to tune the mbufs numbers
But all in all this is a very fast machine and you will be happy with it as I see it right!
I went with 1x 8GB stick of RAM for now so when I upgrade later I won't have to replace 2x 4GB sticks. I can just buy 1 additional 8GB.
-
I can just buy 1 additional 8GB.
This can be really better as I see it right, perhaps others won´t consider
but having much RAM inside a machine was never a false. -
…
4-Pin Molex to SATA Power Cable http://www.newegg.com/Product/Product.aspx?Item=N82E16812200061
...This cable will not work with the motherboard (I made the same mistake) because you need a Female 4-Pin Molex. This cable is a Male 4-Pin Molex.
Here is the correct SATA Power Cable.
-
…
4-Pin Molex to SATA Power Cable http://www.newegg.com/Product/Product.aspx?Item=N82E16812200061
...This cable will not work with the motherboard (I made the same mistake) because you need a Female 4-Pin Molex. This cable is a Male 4-Pin Molex.
Here is the correct SATA Power Cable.
That sucks! Thanks for catching that for me.
-
I did include a link to the correct cable in the OP. Good luck.
-
@Sir:
I did include a link to the correct cable in the OP. Good luck.
Yeah, I just didn't realize I ordered a male when I ordered it on newegg. Oh well, it was only a couple bucks!
-
i just purchased this build (from amazon and mini-box) with a few minor tweaks (different 4 pin extension cable).
Thanks for doing all the research and providing it.
Unfortunately the power brick is out of stock at mini-box for a couple of weeks so I'll have to wait a bit before being able to fully test everything, but still, this will be a fun nice replacement for my current dd-wrt unit.
-
Fans (3x Evercool EC4015SH12BP 4-Pin PWM Fans) http://www.directron.com/ec4015sh12bp.html
Fan Screws (3x Sets of Screws) http://www.directron.com/fanscrews.htmlDid these screws fit the fan?
-
i just purchased this build (from amazon and mini-box) with a few minor tweaks (different 4 pin extension cable).
Thanks for doing all the research and providing it.
Unfortunately the power brick is out of stock at mini-box for a couple of weeks so I'll have to wait a bit before being able to fully test everything, but still, this will be a fun nice replacement for my current dd-wrt unit.
I ordered my power brick off ebay and got it in 2 days. http://www.ebay.com/itm/130478987672
Fans (3x Evercool EC4015SH12BP 4-Pin PWM Fans) http://www.directron.com/ec4015sh12bp.html
Fan Screws (3x Sets of Screws) http://www.directron.com/fanscrews.htmlDid these screws fit the fan?
They did! Using a screwdriver was a pain in the ass because it was so tight so I went out to the garage and got the power drill.
-
I ordered my power brick off ebay and got it in 2 days. http://www.ebay.com/itm/130478987672
I would avoid any items sold from United States, their Shipping charges and Import charges are totally bullshit. BTW, Why 150W 12V/12.5A, Is 60W 12V/5A not good and enough?
-
I ordered my power brick off ebay and got it in 2 days. http://www.ebay.com/itm/130478987672
Thanks. I'll order one of those and get my mini-box order cancelled.
I would avoid any items sold from United States, their Shipping charges and Import charges are totally bullshit. BTW, Why 150W 12V/12.5A, Is 60W 12V/5A not good and enough?
Well, I live in the US :) So that makes it easier.
The main reason why I'm going with that one is the 4-pin mini-din. The straight 4-pin power connector is a bit simpler than a picopsu. I haven't found another unit that has the 4-pin. -
I ordered my power brick off ebay and got it in 2 days. http://www.ebay.com/itm/130478987672
Thanks. I'll order one of those and get my mini-box order cancelled.
No problem! I am just waiting on my RAM to be delivered tomorrow, I went ahead and ordered another 8GB from Amazon for a total of 16GB. The rest of the system is hooked up and boots up fine to the POST screen where it obviously errors out due to no RAM. The IPMI also works and is super cool, I had no idea that existed until researching a pfsense system to build.
I am looking forward to tomorrow!
-
So, I found a work around to my WAN not aquiring DHCP, which it did at least for 3 days. IGB0 no longer will accept a DHCP address from my cable modem, however it does work fine getting an address from a generic dd-wrt router serving DHCP. I have to use any of the other Ethernet ports to connect the Supermico board to the cable modem. Very very wierd. Currently the more I use pfsense, the more broken it seems, for example even with a clean install of squid3, I only get I-CAP errors. NTP service when setup seems to drop randomly, and the webgui many times is just too slow, or allowing no access with an internal error 500 or 503. Fresh pfsense installs only work for short periods.
-
I went ahead and ordered another 8GB from Amazon for a total of 16GB.
I would guess to high up the mbufs numbers, 16 GB is really enough, better then wasting
unused RAM then spending 3 GB in total for a higher mbufs size. I would give this a try. ;)@Justin0
In your signature you have named a Supermicro C2558 mainboard and a SSD.
And after a fresh install did you enable TRIM support and PowerD, related to
the slow GUI or Interface?Regarding to the NTP Server, did you configure it in this direction:
- Setting NTP up on the DD-WRT and then on the pfSense setting up the DD-WRT as the NTP server?
- Or did you only setting up the NTP on pfSense and then nothing?
-
@BlueKobold:
@Justin0
In your signature you have named a Supermicro C2558 mainboard and a SSD.
And after a fresh install did you enable TRIM support and PowerD, related to
the slow GUI or Interface?Regarding to the NTP Server, did you configure it in this direction:
- Setting NTP up on the DD-WRT and then on the pfSense setting up the DD-WRT as the NTP server?
- Or did you only setting up the NTP on pfSense and then nothing?
Trim and PowerD enabled.
NTP was setup after I tried to deploy PFsense: Internet>Cable Modem>PFSense>DDWRT AP ONLY mode
It's not just NTP though, it seems services tend to stop and start randomly, or not work at all. Squid3 antivirus blocks everything w/default settings after fixing the prompts to fix the files once saved, igiving ICAP errors on websites. Disabling IPV6, and saving interfaces (along with disabling IPv6 tracking or DHCP6) results in many log entries about not able to find IPv6 on WAN. Just odd problems that feel like the GUI does not properly alter the settings.
-
Does anyone know a definitive way to enable trim on this motherboard?
I searched, but there are so many methods, I don't know which one to use for version 2.2.4. Is the boot in single user mode and running
/sbin/tunefs -t enable / /sbin/rebootthe recommended way to enable trim? Will this persist between reboots and upgrades?
Also, what is everyone using for PowerD settings for this build recipe?
-
The above is how I enabled trim. Again just make sure you are in single user mode, which I did over IPMI.