HP NC364T NOT WORK
-
Hello anybody.
I'm newbie.
I bought a HP NC364T but it not work with pfsense 2.2.4
How to make it work?
Thank you for read and Sorry about my English.
-
This is a quad port GBit card, right? It is based on the Intel 82571EB chipset. This is supported by the em driver in FreeBSD.
Hmm.. contents of /var/log/dmesg.boot ?
-
Please help me how to enable the em driver?
-
It's enabled by default. Provide the requested info, plus pciconf -lv output. (Diagnostics - Command Prompt- Execute Shell command)
-
I am still dont understand, could you explain?
-
The LOGs:
Copyright
1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p15 #0 c5ab052(releng/10.1)-dirty: Sat Jul 25 20:25:50 CDT 2015
root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_SMP.10 i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2327.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 0x6 Model = 0xf Stepping = 11
Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe3fd <sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant, performance statistics
real memory = 1073741824 (1024 MB)
avail memory = 963248128 (918 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <dell b10k ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 8
ioapic0 <version 2.0="">irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0813d20, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0813dd0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0813e80, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xc083c4b0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc083c560, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc083c610, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
random: <software, yarrow="">initialized
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <dell b10k ="">on motherboard
acpi0: Power Button (fixed)
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer="">port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_button0: <power button="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: ec00001 vs ec00000
pci0: <acpi pci="" bus="">on pcib0
vgapci0: <vga-compatible display="">port 0xec90-0xec97 mem 0xfe800000-0xfebfffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <intel q45="" svga="" controller="">on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
vgapci1: <vga-compatible display="">mem 0xfe700000-0xfe7fffff at device 2.1 on pci0
pci0: <simple comms="">at device 3.0 (no driver attached)
atapci0: <intel ata="" controller="">port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0
ata2: <ata channel="">at channel 0 on atapci0
ata3: <ata channel="">at channel 1 on atapci0
uart2: <4 Series Chipset Serial KT Controller> port 0xec98-0xec9f mem 0xfe6d8000-0xfe6d8fff irq 17 at device 3.3 on pci0
em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0xecc0-0xecdf mem 0xfe6e0000-0xfe6fffff,0xfe6d9000-0xfe6d9fff irq 21 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:21:9b:27:da:e1
uhci0: <uhci (generic)="" usb="" controller="">port 0xff20-0xff3f irq 16 at device 26.0 on pci0
usbus0 on uhci0
uhci1: <uhci (generic)="" usb="" controller="">port 0xff00-0xff1f irq 17 at device 26.1 on pci0
usbus1 on uhci1
uhci2: <uhci (generic)="" usb="" controller="">port 0xfc00-0xfc1f irq 22 at device 26.2 on pci0
usbus2 on uhci2
ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xfe6da000-0xfe6da3ff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac0: <intel 82801jd="" hda="" controller="">mem 0xfe6dc000-0xfe6dffff irq 16 at device 27.0 on pci0
pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
ACPI Warning: \134_SB_.PCI0.PCI2._PRT: Return Package has no elements (empty) (20130823/nsprepkg-137)
pci1: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">irq 17 at device 28.1 on pci0
pci2: <acpi pci="" bus="">on pcib2
uhci3: <uhci (generic)="" usb="" controller="">port 0xff80-0xff9f irq 23 at device 29.0 on pci0
usbus4 on uhci3
uhci4: <uhci (generic)="" usb="" controller="">port 0xff60-0xff7f irq 17 at device 29.1 on pci0
usbus5 on uhci4
uhci5: <uhci (generic)="" usb="" controller="">port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usbus6 on uhci5
ehci1: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xff980000-0xff9803ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci3: <acpi pci="" bus="">on pcib3
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
ahci0: <ahci sata="" controller="">port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <ahci channel="">at channel 0 on ahci0
ahcich1: <ahci channel="">at channel 1 on ahci0
ahcich5: <ahci channel="">at channel 5 on ahci0
ahciem0: <ahci enclosure="" management="" bridge="">on ahci0
ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <parallel port="" bus="">on ppc0
lpt0: <printer>on ppbus0
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
pmtimer0 on isa0
orm0: <isa option="" roms="">at iomem 0xc0000-0xcc7ff,0xcc800-0xce7ff,0xce800-0xd0fff,0xd1000-0xd3fff pnpid ORM0000 on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ata channel="">at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ata channel="">at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <enhanced speedstep="" frequency="" control="">on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 72a072a0600072a
device_attach: est0 attach returned 6
p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
est1: <enhanced speedstep="" frequency="" control="">on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 72a072a0600072a
device_attach: est1 attach returned 6
p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <analog devices="" ad1984a="" hda="" codec="">at cad 2 on hdac0
hdaa0: <analog devices="" ad1984a="" audio="" function="" group="">at nid 1 on hdacc0
pcm0: <analog devices="" ad1984a="" (analog)="">at nid 18 and 20 on hdaa0
pcm1: <analog devices="" ad1984a="" (analog)="">at nid 17 and 21 on hdaa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen2.1: <intel>at usbus2
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen0.1: <intel>at usbus0
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen5.1: <intel>at usbus5
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
ugen4.1: <intel>at usbus4
uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
ugen3.1: <intel>at usbus3
uhub5: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus3
ugen7.1: <intel>at usbus7
uhub6: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
ugen6.1: <intel>at usbus6
uhub7: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ugen0.2: <sino wealth="">at usbus0
ukbd0: <sino 0="" 2="" wealth="" usb="" keyboard,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus0
kbd2 at ukbd0
uhid0: <sino 0="" 2="" wealth="" usb="" keyboard,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus0
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <st380815as 4.ada="">ATA-7 SATA 2.x device
ada0: Serial Number 6RW3WBQX
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <ahci sgpio="" enclosure="" 1.00="" 0001="">SEMB S-E-S 2.00 device
ses0: SEMB SES Device
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1163766243 Hz quality 1000
Trying to mount root from ufs:/dev/ad8s1a [rw]…</ahci></st380815as></sino></sino></sino></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></analog></analog></analog></analog></cpu></enhanced></cpu></enhanced></at></keyboard></ata></ata></generic></system></isa></parallel></printer></parallel></parallel></ahci></ahci></ahci></ahci></ahci></isa></pci-isa></acpi></acpi></ehci></uhci></uhci></uhci></acpi></acpi></acpi></acpi></intel></ehci></uhci></uhci></uhci></intel(r)></ata></ata></intel></simple></vga-compatible></intel></vga-compatible></acpi></acpi></power></high></at></at></acpi></acpi></dell></software></software,></version></dell ></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe> -
Well, this means the computer is not detecting the card. If it's somehow disabled there's not much you can do within pfSense.
Better look in the bios settings and see if all PCIe slots are enabled. You might also want to find the newest bios update for this computer.
Perhaps disabling PCIe power management might help. Just try a few settings. You might also want to put the card in a different computer, and see if it works then. -
While there, disable useless junk like the sound card, LPT port, etc. etc. etc.
-
I Am using DELL Optiplex 760.
Still get problem. Help
-
Sometimes, at the some board in the BIOS must be first enabled to the or on the PCIe slot - PCIe x1 to get the card
full recognized.