Netgear AC763S problems
-
From the MiFi's menu also make sure tethering is enabled and that any CD ROM mode is disabled.
-
@Phishfry:
I have found that pfSense installs a terminal program called "cu". I would try menu#8 -command line and run
cu -l /dev/cuaU0.3 and see if your really talking to the correct port/modem. Do you know AT commands?I have a feeling that maybe your mass storage device is still enabled or maybe you have the wrong port.
If you post your boot log it will help.I have found that some Sierra modems offer 2 AT consoles on two different ports. One works with AT commands the other works until a connection attempt. I would try other ports with cu.
Also i would use Ubuntu and install Modem Manager GUI to discover what mode the device is in. You may need to flash it to an DirectIP firmware.
Also I see IP6 in your log and i would disable it unless being used. Both system wide and per interface.
Thanks for the reply. When I run the cu command as you suggested, it just says "Connected" but the console also freezes (done it over vpn, SSH into box, not local). I have to close the session.
Here is the boot log:
$ dmesg Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE-p15 #0 c5ab052(releng/10.1)-dirty: Sat Jul 25 20:20:58 CDT 2015 root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM) i3 CPU 550 @ 3.20GHz (3192.04-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x20655 Family = 0x6 Model = 0x25 Stepping = 5 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ae3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,popcnt>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x1 <lahf>VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8257368064 (7874 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <dell pe_sc3 =""> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 5 ioapic0 <version 2.0=""> irqs 0-23 on motherboard iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806345e0, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80634690, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80634740, 0) error 1 wlan: mac acl policy registered ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060ce10, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060cec0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060cf70, 0) error 1 random: <software, yarrow=""> initialized kbd1 at kbdmux0 cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <dell pe_sc3=""> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <acpi cpu=""> on acpi0 cpu1: <acpi cpu=""> on acpi0 cpu2: <acpi cpu=""> on acpi0 cpu3: <acpi cpu=""> on acpi0 atrtc0: <at realtime="" clock=""> port 0x70-0x7f irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <at timer=""> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 pcib1: <acpi pci-pci="" bridge=""> at device 1.0 on pci0 pci1: <acpi pci="" bus=""> on pcib1 pcib2: <pci-pci bridge=""> at device 0.0 on pci1 pci2: <pci bus=""> on pcib2 pcib3: <pci-pci bridge=""> at device 2.0 on pci2 pci3: <pci bus=""> on pcib3 igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0xfcc0-0xfcdf mem 0xdf7c0000-0xdf7dffff,0xdf800000-0xdf9fffff,0xdf7b8000-0xdf7bbfff irq 18 at device 0.0 on pci3 igb0: Using MSIX interrupts with 5 vectors igb0: Ethernet address: 00:1b:21:15:b5:e8 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0xfce0-0xfcff mem 0xdf7e0000-0xdf7fffff,0xdfa00000-0xdfbfffff,0xdf7bc000-0xdf7bffff irq 19 at device 0.1 on pci3 igb1: Using MSIX interrupts with 5 vectors igb1: Ethernet address: 00:1b:21:15:b5:e9 igb1: Bound queue 0 to cpu 0 igb1: Bound queue 1 to cpu 1 igb1: Bound queue 2 to cpu 2 igb1: Bound queue 3 to cpu 3 pcib4: <pci-pci bridge=""> at device 4.0 on pci2 pci4: <pci bus=""> on pcib4 igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0xecc0-0xecdf mem 0xdf1c0000-0xdf1dffff,0xdf200000-0xdf3fffff,0xdf1b8000-0xdf1bbfff irq 16 at device 0.0 on pci4 igb2: Using MSIX interrupts with 5 vectors igb2: Ethernet address: 00:1b:21:15:b5:ec igb2: Bound queue 0 to cpu 0 igb2: Bound queue 1 to cpu 1 igb2: Bound queue 2 to cpu 2 igb2: Bound queue 3 to cpu 3 igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0=""> port 0xece0-0xecff mem 0xdf1e0000-0xdf1fffff,0xdf400000-0xdf5fffff,0xdf1bc000-0xdf1bffff irq 17 at device 0.1 on pci4 igb3: Using MSIX interrupts with 5 vectors igb3: Ethernet address: 00:1b:21:15:b5:ed igb3: Bound queue 0 to cpu 0 igb3: Bound queue 1 to cpu 1 igb3: Bound queue 2 to cpu 2 igb3: Bound queue 3 to cpu 3 ehci0: <intel pch="" usb="" 2.0="" controller="" usb-b=""> mem 0xdfcfa000-0xdfcfa3ff irq 22 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 pcib5: <acpi pci-pci="" bridge=""> at device 28.0 on pci0 pci5: <acpi pci="" bus=""> on pcib5 bce0: <qlogic netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)=""> mem 0xda000000-0xdbffffff irq 16 at device 0.0 on pci5 miibus0: <mii bus=""> on bce0 brgphy0: <bcm5709 10="" 100="" 1000baset="" phy=""> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Ethernet address: bc:30:5b:d6:c3:68 bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) Coal (RX:6,6,18,18; TX:20,20,80,80) bce1: <qlogic netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)=""> mem 0xdc000000-0xddffffff irq 17 at device 0.1 on pci5 miibus1: <mii bus=""> on bce1 brgphy1: <bcm5709 10="" 100="" 1000baset="" phy=""> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Ethernet address: bc:30:5b:d6:c3:69 bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) Coal (RX:6,6,18,18; TX:20,20,80,80) ehci1: <intel pch="" usb="" 2.0="" controller="" usb-a=""> mem 0xdfcfc000-0xdfcfc3ff irq 22 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 pcib6: <acpi pci-pci="" bridge=""> at device 30.0 on pci0 pci6: <acpi pci="" bus=""> on pcib6 vgapci0: <vga-compatible display=""> mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci6 vgapci0: Boot video device isab0: <pci-isa bridge=""> at device 31.0 on pci0 isa0: <isa bus=""> on isab0 ahci0: <intel 5="" 3400="" series="" ahci="" sata="" controller=""> port 0xdcd0-0xdcd7,0xdcc8-0xdccb,0xdcd8-0xdcdf,0xdccc-0xdccf,0xdce0-0xdcff mem 0xdfcfe000-0xdfcfe7ff irq 20 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported ahcich0: <ahci channel=""> at channel 0 on ahci0 ahcich1: <ahci channel=""> at channel 1 on ahci0 ahcich2: <ahci channel=""> at channel 2 on ahci0 ahcich3: <ahci channel=""> at channel 3 on ahci0 ahcich4: <ahci channel=""> at channel 4 on ahci0 ahcich5: <ahci channel=""> at channel 5 on ahci0 ahciem0: <ahci enclosure="" management="" bridge=""> on ahci0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <isa option="" roms=""> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0 sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <enhanced speedstep="" frequency="" control=""> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 18 device_attach: est0 attach returned 6 p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 est1: <enhanced speedstep="" frequency="" control=""> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 18 device_attach: est1 attach returned 6 p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1 est2: <enhanced speedstep="" frequency="" control=""> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 18 device_attach: est2 attach returned 6 p4tcc2: <cpu frequency="" thermal="" control=""> on cpu2 est3: <enhanced speedstep="" frequency="" control=""> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 18 device_attach: est3 attach returned 6 p4tcc3: <cpu frequency="" thermal="" control=""> on cpu3 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. random: unblocking device. usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <intel> at usbus0 uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus0 ugen1.1: <intel> at usbus1 uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087=""> at usbus0 uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr=""> on usbus0 ugen1.2: <vendor 0x8087=""> at usbus1 uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr=""> on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen1.3: <logitech> at usbus1 ukbd0: <logitech 0="" 3="" usb="" receiver,="" class="" 0,="" rev="" 2.00="" 12.01,="" addr=""> on usbus1 kbd0 at ukbd0 uhid0: <logitech 0="" 3="" usb="" receiver,="" class="" 0,="" rev="" 2.00="" 12.01,="" addr=""> on usbus1 ugen1.4: <vendor 0x0424=""> at usbus1 uhub4: <vendor 4="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr=""> on usbus1 uhub4: MTT enabled uhub4: 2 ports with 2 removable, self powered ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <samsung he253gj="" 1aj30001=""> ATA-8 SATA 2.x device ada0: Serial Number S2B5J90B325667 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <ahci sgpio="" enclosure="" 1.00="" 0001=""> SEMB S-E-S 2.00 device ses0: SEMB SES Device cd0 at ahcich3 bus 0 scbus3 target 0 lun 0 cd0: <teac dvd-rom="" dv-28sw="" r.2a=""> Removable CD-ROM SCSI-0 device cd0: Serial Number 10102011162723 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1596022432 Hz quality 1000 Trying to mount root from ufs:/dev/ufsid/55960aa86e06de84 [rw]... coretemp0: <cpu on-die="" thermal="" sensors=""> on cpu0 est0: <enhanced speedstep="" frequency="" control=""> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 18 device_attach: est0 attach returned 6 coretemp1: <cpu on-die="" thermal="" sensors=""> on cpu1 est1: <enhanced speedstep="" frequency="" control=""> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 18 device_attach: est1 attach returned 6 coretemp2: <cpu on-die="" thermal="" sensors=""> on cpu2 est2: <enhanced speedstep="" frequency="" control=""> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 18 device_attach: est2 attach returned 6 coretemp3: <cpu on-die="" thermal="" sensors=""> on cpu3 est3: <enhanced speedstep="" frequency="" control=""> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 18 device_attach: est3 attach returned 6 vlan0: changing name to 'bce1_vlan10' vlan1: changing name to 'bce1_vlan20' vlan2: changing name to 'bce1_vlan30' vlan3: changing name to 'bce1_vlan40' bce0: Gigabit link up! bce0: link state changed to UP bce0: Gigabit link up! bce0: Gigabit link up! tun1: changing name to 'ovpns1' bce1: bce1: link state changed to UP bce1_vlan20: link state changed to UP Gigabit link up! bce1_vlan40: link state changed to UP bce1_vlan10: link state changed to UP bce1_vlan30: link state changed to UP bce1: Gigabit link up! pflog0: promiscuous mode enabled ovpns1: link state changed to UP bce0: promiscuous mode enabled bce1: promiscuous mode enabled ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 2, addr 5 (disconnected) ugen1.5: <dell> at usbus1 ukbd1: <dell 0="" 5="" dell="" usb="" entry="" keyboard,="" class="" 0,="" rev="" 1.10="" 1.15,="" addr=""> on usbus1 kbd2 at ukbd1 ugen1.6: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 6="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.6: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 2, addr 6 (disconnected) ugen1.6: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 6="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <dell> at usbus1 (disconnected) ukbd1: at uhub4, port 1, addr 5 (disconnected) ng0: changing name to 'ppp0' ugen1.6: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 2, addr 6 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' tun0: link state changed to UP tun0: link state changed to DOWN ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) u3g0: at uhub4, port 1, addr 5 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 (disconnected) ugen1.5: <sierra wireless,="" incorporated=""> at usbus1 u3g0: <sierra 0="" 5="" wireless,="" incorporated="" ac763s,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr=""> on usbus1 u3g0: Found 5 ports. ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0' ng0: changing name to 'ppp0'</sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></sierra></dell></sierra></sierra></sierra></sierra></sierra></dell></dell></sierra></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></teac></ahci></samsung></sierra></sierra></vendor></vendor></logitech></logitech></logitech></vendor></vendor></vendor></vendor></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></generic></system></isa></ahci></ahci></ahci></ahci></ahci></ahci></ahci></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></bcm5709></mii></qlogic></bcm5709></mii></qlogic></acpi></acpi></intel></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></acpi></acpi></high></at></at></acpi></acpi></acpi></acpi></dell></software></software,></version></dell ></lahf></syscall,nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>
I will try Ubuntu later today at home and post back.
Finally, IPv6 is disabled, global and on each interface. I was puzzled myself, why it would show up.
I hope this helps.
-
So that sounds like the data channel if it says that. Try other ports. Maybe start over and figure out the USB port before you make an PPP device because there is an mpd5 script that runs on first setup..Usually Sierra devices use the next to last interface, so on an MC7700 it is always cuaU0.4.
-
If it says Connected and locks up it is defiantly not the right port. You have working hardware you just need to find the AT channel. When it does come up in the terminal cu -you will need to hit AT and return button a couple of times until it is returning AT onscreen. Then type ATZ. Then just to checkout the device issue this command - ATI. Info shows you much goodies even firmware version you can see. When you get this figured out then proceed to make your PPP device with the proper port under the gui.
-
The ubuntu is not needed if you have CU running. It will show different TTY and just confuse things. It wass good for last ditch effort.
What you need is what I said above but try other interfaces with CU. Try cu -l /dev/cuaU0.4 to start then maybe /dev/cuaU0.2 and try them all. The -next to last- interface is the tip from Whirlpool.AU forum and stands pretty true to date for me with Sierra. -
Hi,
I double checked some settings, and after testing with the cu command, the cuaU0.3 is defiantly the right channel.
This is what I get running the cu command and than ATI:[2.2.4-RELEASE][admin@pfSense]/root: cu -l /dev/cuaU0.3 Connected at OK ati Manufacturer: Sierra Wireless, Incorporated Model: AC763S Revision: SWI9200H2_03.05.11.00AP R5145 CARMD-EN-10527 2012/05/24 15:10:56 IMEI: 0130 IMEI SV: 8 FSN: CDX2810 3GPP Release 8 +GCAP: +CGSM,+DS,+ES OK
And I get the same behaviour that I posted earlier. Stops at the same spot and has IPv6 requests.
So these are my questions:
- Why does the PPP request a IPv6 (I have IPv6 off in Advanced Config and for each interface. It should not ask for IPv6
- It stops at the "ppp: [opt1_link0] MODEM: can't ioctl(TIOCMGET) /dev/cuaU0.3: Device not configured", WHY?
It seems like it should work and is streight forward, but something is blocking it. Anybody an idea how I can deactivate the IPv6 request in PPP protocol?
Any further suggestins for testing?
Cheers,
Eddi
-
Well i finally see what the device is, Qualcom 9200 which is the same as the the MC7700. Is it possible there is something in the Mifi contributing? If not be advised the PPP settings are in a file that corresponds to your interface -not under PPP.conf..
Mpd5 is used as a daemon. It uses a file named like this OPT1_link.mpd5 deep down under /usr/etc/ structure.Have you tried to flash it to the latest DIP mode firmware. I see some negative posts on the firmwares elsewhere. Sierra has still been updating the firmware for the MC7700 and actually added features. Yours has the initial firmware from 2012.
That said I don't see anybody else here using the device.
-
Here is a trick from another thread:
If you try this setting it bypasses some of the modem script.
PPPconfig>>show advanced>>modem init string:+CFUN=1
-
@Phishfry:
Well i finally see what the device is, Qualcom 9200 which is the same as the the MC7700. Is it possible there is something in the Mifi contributing? If not be advised the PPP settings are in a file that corresponds to your interface -not under PPP.conf..
Mpd5 is used as a daemon. It uses a file named like this OPT1_link.mpd5 deep down under /usr/etc/ structure.Have you tried to flash it to the latest DIP mode firmware. I see some negative posts on the firmwares elsewhere. Sierra has still been updating the firmware for the MC7700 and actually added features. Yours has the initial firmware from 2012.
That said I don't see anybody else here using the device.
I will look for the mpd5 file and see what I can dig up. As to the firmware, the device is locked to the provider (TELUS) … so I probably cannot flash the latest DIP firmware on it. Would you have a download/description link?
@Phishfry:
Here is a trick from another thread:
If you try this setting it bypasses some of the modem script.
PPPconfig>>show advanced>>modem init string:+CFUN=1
I will try this setting.
Thank you for all your help so far!! It is really appreciated!
-
Here is where they added ipv6 to pfSense mpd5
https://forum.pfsense.org/index.php?topic=32721.msg171835#msg171835I see some PROTOCOMP and ACFCOMP in the PPP log as well. I thought that was disabled under ppp.conf
Is it possible your cell provider is using ipv6 and the error is from that?
I have a Windows utility for switching modes from Sierra. Send me a PM if needed. I would try and put it in DIP mode just to make sure. If device is in QMI mode there may be a AT console available as well so you need to ensure DIP mode. If you look at the Sierra pdf's there is a way to switch it with AT commands as well.
Try this command under CU- AT!UDINFO? and post results.
Are you running pfSense on bare metal?
-
Are you running pfSense on bare metal?
Yes its running on bare metal.
I see some PROTOCOMP and ACFCOMP in the PPP log as well. I thought that was disabled under ppp.conf
Is it possible your cell provider is using ipv6 and the error is from that?
I will check the ppp.conf and disable all 3, if I can find them.
I have a Windows utility for switching modes from Sierra. Send me a PM if needed. I would try and put it in DIP mode just to make sure. If device is in QMI mode there may be a AT console available as well so you need to ensure DIP mode. If you look at the Sierra pdf's there is a way to switch it with AT commands as well.
I don't understand the DIP mode, will have to do some reading. I tried to load a new firmware last night, but I can only get them from the provider, and as you have pointed out, they are old. I wish I could load the stock Sierra Wireless firmware on it but the device is locked.
Try this command under CU- AT!UDINFO? and post results.
I will try this tonight and report back.
That said I don't see anybody else here using the device.
Its a hotspot and I can get it fairly cheap on kijiji. Its also practical, because, when I go camping, I can take it with me and have wifi/internet in the trailer. Would be nice, if I could stick to it.
I am also thinking of going another route and using a RaspPi (have a model B that I don't use) and than just bridge the WAN to the Ethernet port. But it would have to be a transparent bridge. Would be nicer to have it working in pfsense.Thank you so far, I will report back.
-
I am not fully versed in the PPP stuff either. I am pretty sure that pfSense ignores the ppp.conf file.. So i think only file to edit is the mpd5 file. This edit will not survive OS upgrades either.
-
Did you note this line from the 2011 post
I needed to add the line "set bundle enable ipv6cp" somewhere in the mpd5 config in order to allow it to accept ipv6cp config from my ISP.
Might want to try enable/disable there.