URL Table not working correctly
-
Eeeeeeeh? How on earth is swap relevant here???
-
Discs are notoriously slow, someone may have put a hard/soft limit in the code to stop too much data being loaded into memory which could then force the OS to use swap more.
Without knowing this history of the code like when it was originally written which could be a factor, the best option is to examine the code in question, something I'm not able to do at the moment as I'm in the middle of rewriting a Linux network driver as the latest version being shipped in distro's dont work and I want to know why.
But as another example, it could also be caused by using the wrong data type in code, for example someone might have used a short instead of a long although that was more common in 16bit code and because of the way code was written back then, it wasnt common to see techniques used which made it easier to port code when wider cpu's came out, ie 8bit to 16bit, 16-32bit, 32-64bit cpu's.
https://en.wikipedia.org/wiki/C_data_types
Short signed integer type. Capable of containing at least the [−32767,+32767] range
Long signed integer type. Capable of containing at least the [−2147483647,+2147483647] rangeThe limit doesnt in this case appear to be tied to a data type limit as these stand out quite easily when problems occur, but without examining the code in question my previous post could only be considered as a guess at that stage, but I still suspect swap might be the reason to have a limit.
-
Dude, are you smoking something strong? Stop flooding this topic with total SHIT. Reported to mods. Get on topic or leave this alone. This is a real issue and has nothing to do with swaps and HDDs.
-
You are doing something very likely insane and will hit BSD kernel limits and issues with this.
https://redmine.pfsense.org/issues/4876
https://lists.freebsd.org/pipermail/freebsd-pf/2011-May/006139.html
(Would appreciate if someone more savvy about the FreeBSD kernel responded here or on that bug.)You asked for some input. Make your mind up? ::)
-
Yeah, I wanted input from people who are familiar with the FreeBSD kernel code in order to get relevant hints.
-
Yeah, I wanted input from people who are familiar with the FreeBSD kernel code in order to get relevant hints.
So you know everyone now, that must make you the NSA. ;D
-
So you know everyone now, that must make you the NSA. ;D
Example of relevant hint: https://lists.freebsd.org/pipermail/freebsd-pf/2011-May/006139.html
(Except that this one and others mentioned on that thread do NOT work.)
Example of totally irrelevant "hint":
- I didn't read the code
- Swap is slow
- Get an SSD
- signed long is 2^xyz
:( >:( >:(
P.S. That box has 8GiB of RAM and is NOT swapping. This is NOT related to running out of physical RAM!!!
:( >:( >:(
-
BTW, @OP:
You can see what's in the tables when you go to Diagnostics - Tables and select the one you need from the dropdown. (The javascript fancy popup is not usable anyway for 200K+ or what entries… cannot search in that at all.)
-
Discs are notoriously slow, someone may have put a hard/soft limit in the code to stop too much data being loaded into memory which could then force the OS to use swap more.
I saw that thread and one of the thoughts that crossed my mind was the coder has come up with something/algo to limit how much can get loaded into memory to maintain performance. Bear in mind alot of old code was written before the HW developments like loads of RAM & SSD drives we have today, so designs & code compensated or restricted for poor HW performance.
Until the code is examined and the reasons for the behaviour is established as it might even be by design, everything is speculation on everyone's part here and in the freebsd thread, but they would be the areas I would look into and for some of the reasons why.
-
-
Heh, "right now"…
-
I'm not having any issues with swap space, however I've also not enabled any firewall rules to use the new URL Table…I had when I first implemented this, but only for a few minutes while testing how things were working after enabling. I didn't see any HW or OS issues....just the two anomalies I've mentioned, so rules were enabled for 5-10 mins, without performance issues.
Any help/feedback on my actual issues/original questions?
So for some background, the reason I started using this was because I was originally using a Network aliases, but when I starting adding more IP's, I received an error stating something about reaching a limit of 1000 and to change something in php.ini, I was about to do that, but that's when I learned about the URL Tables. However in my original IP aliases list I only have about 320 IP's (not 1000). Since I was making some changes I decided to use my large block list I've been gathering, thus the reason for the 200k entries....but originally it was only 320 or so on a Network Alias.
So if I can't have 250k entries, how do I solve this, is there a way to have large numbers of entries without breaking anything (but again, the OS and HW performance were fine for the 5-10 mins)? Why is it showing numbers that I don't even have in my URL table?
Thanks,
-
Any help/feedback on my actual issues/original questions?
See this: https://forum.pfsense.org/index.php?topic=98698.msg549855#msg549855
-
That link takes me to your comment that I've pasted below…how does that help? You want me to try Diagnostics -Tables to see if it loads?
BTW, @OP:
You can see what's in the tables when you go to Diagnostics - Tables and select the one you need from the dropdown. (The javascript fancy popup is not usable anyway for 200K+ or what entries... cannot search in that at all.)
-
No. I want you to compare what you see there with what you SHOULD see there, i.e. whether or not it matches the file downloaded. The popup is something that just cannot be worked with on 250K IPs, I'd figure it's very obvious?
-
No. I want you to compare what you see there with what you SHOULD see there, i.e. whether or not it matches the file downloaded. The popup is something that just cannot be worked with on 250K IPs, I'd figure it's very obvious?
It shows the same thing as in the first screen shot, IP's that are not in my text file. I've included a screen shot of it.
![8-28-2015 12-15-21 pm.png](/public/imported_attachments/1/8-28-2015 12-15-21 pm.png)
![8-28-2015 12-15-21 pm.png_thumb](/public/imported_attachments/1/8-28-2015 12-15-21 pm.png_thumb) -
Afraid that unless you make your blocklist available here, this won't get anywhere.
-
Why don't you try to use pfBlockerNG to load these text files… It will also have the option of de-duplicating the Lists (if there are any dups...)
A small note... from the 2nd screen shot... You don't need to :
cat filename | wc -lYou can just use:
wc -l filenameThe following is actually faster if your counting ms :)
grep -c ^ filename -
Afraid that unless you make your blocklist available here, this won't get anywhere.
I'm not sure the whole list is needed, but I've searched for the IP's showing up in the table in my file, but to no avail.
[root@]# grep "1\.0\.209\.0" blocklist.txt [root@]# grep "1\.0\.155\.0" blocklist.txt [root@]# grep "1\.0\.167\.0" blocklist.txt [root@]# head blocklist.txt 120.203.159.14/24 118.244.254.17/24 117.26.227.207/24 27.153.210.22/24 183.232.55.193/24 211.119.86.147/24 175.44.29.77/24 125.77.142.168/24 122.96.59.106/24 190.216.229.68/24
Here's to show grep is working… (selected an IP from the head command above):
[root@]# grep "27\.153\.210\.22" blocklist.txt 27.153.210.22/24
-
Why don't you try to use pfBlockerNG to load these text files… It will also have the option of de-duplicating the Lists (if there are any dups...)
A small note... from the 2nd screen shot... You don't need to :
cat filename | wc -lYou can just use:
wc -l filenameThe following is actually faster if your counting ms :)
grep -c ^ filenameI'm currently using pfBlockerNG (by selecting specific locations), but 1) wasn't aware I could load custom files, 2) need some automation, the URL Table's appear to offer the scheduled importing I need.
And thanks for the wc tip, I didn't know that!