Problem with interfaces
-
Hi,
I've installed pfsense 2 on hp proliant ml310 g5 for configure load balancing
the ports are the following:
- Intel NC326i Gigabit Server Adapter (dual port, integrated on the motherboard)
- A card tp-link gigabit (used as a LAN interface)
the problem comes when I want to use the ports as wan intel, because I recognize only one? (bge0)
Thank you in advance
-
Hi,
I've installed pfsense 2 on hp proliant ml310 g5 for configure load balancing
the ports are the following:
- Intel NC326i Gigabit Server Adapter (dual port, integrated on the motherboard)
- A card tp-link gigabit (used as a LAN interface)
the problem comes when I want to use the ports as wan intel, because I recognize only one? (bge0)
Thank you in advance
I saw that the second is a iLO port can I use that?
-
I saw that the second is a iLO port can I use that?
You might configure it in the BIOS eventually.
-
There is anything in BIOS… There is another solution to use that port as a normally NIC?
-
There is anything in BIOS… There is another solution to use that port as a normally NIC?
In the BIOS or the Firmware of the ILO Port must be something to let this port work likes a normal LAN
port, otherwise it is not able to set it up to use as a normal LAN port as I see it right.