Pfsense w/ Cisco SG300 & Apple Airport Extreme Guest SSID (vlan 1003) - help!
-
Hi everyone,
I'm having trouble with my guest SSID - I can't get it to serve an IP when connecting to the guest network.
My equipment:
1. pfsense
2. Apple Airport Extreme (guest SSID setup - the vlan tag is 1003)
3. Cisco SG300I've following these instructions to setup pfsense - http://tech.krizic.net/2013/09/apple-airport-extreme-guest-mode-with.html
I'm not too sure what to do with the SG300. I've attached screenshots of my current settings … can anyone help? I've been tearing out my hair trying to get this to work.
Thanks everyone!
![Screen Shot 2015-02-11 at 10.03.52 PM.png](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.03.52 PM.png)
![Screen Shot 2015-02-11 at 10.03.58 PM.png](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.03.58 PM.png)
![Screen Shot 2015-02-11 at 10.03.52 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.03.52 PM.png_thumb)
![Screen Shot 2015-02-11 at 10.03.58 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.03.58 PM.png_thumb) -
A few more settings…
![Screen Shot 2015-02-11 at 10.03.45 PM.png](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.03.45 PM.png)
![Screen Shot 2015-02-11 at 10.04.08 PM.png](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.04.08 PM.png)
![Screen Shot 2015-02-11 at 10.04.17 PM.png](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.04.17 PM.png)
![Screen Shot 2015-02-11 at 10.03.45 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.03.45 PM.png_thumb)
![Screen Shot 2015-02-11 at 10.04.08 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.04.08 PM.png_thumb)
![Screen Shot 2015-02-11 at 10.04.17 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2015-02-11 at 10.04.17 PM.png_thumb) -
I figured it out … I didn't have the port vlan membership properly setup for the airport. Doh!
-
I'm doing this with an SG200 here.
For whatever reason, I can't seem to get connecting clients to be issued an IP through DHCP.
-
Seemingly, by turning off bogon network deny on WAN seems to have caused things to start working.
-
Blocking bogon on wan would have NOTING to do with it that is for sure!!!