Install issues, get stuck in mountroot terminal
-
Hi
Im trying to install version 2.0.3 - i have tried 3 different methods.
1: live cd via usb cd rom
2: live cd restored to usb key
3: memstick image restore to usb keyall 3 options throws me to mount root terminal, even though i hit 3 in the menu (the boot from usb device option)
As a 4. option i tried installing pfsense in a difference computer with internal cd rom drive end then move the harddrive back to the other pc again, but then i get errors about config.xml not being present. Also i get errors saying no interfaces found.
The pc im trying to install on is a shuttle with dual realtech network adaptoers.
Is there any other way to install this ? I cant seem to get past the mountroot shell / terminal.
-
If it's a recent Shuttle box with Realtek NICs you probably need to use a 2.1 snapshot to get compatible drivers.
http://snapshots.pfsense.org/What do you mean by 'restore to usb key'?
Steve
-
all 3 options throws me to mount root terminal, even though i hit 3 in the menu (the boot from usb device option)
PERHAPS your box has a USB connected "disk device" (such as a SD card reader) that is found on the bus BEFORE the boot device. That would cause the boot device to become (perhaps) /dev/da1 whereas configuration script would be expecting the boot device to be /dev/da0.
Is there any other way to install this ? I cant seem to get past the mountroot shell / terminal.
What is reported if you type a question mark then hit the enter key? You should be able to continue by typing the correct string to that prompt but I can't tell you what the correct string would be since I don't know the device configuration of your system. In the case of you moving a hard drive from another system the boot drive probably changed ints unit number, for example, it might have been /dev/ad4 in the install PC and then became /dev/ad6 in the target PC. After typing the correct device string to the mountroot prompt the startup should contnue, then when get the console menu type 8 to get a shell prompt then edit /etc/fstab to specify the correct partition for the root file system.