CrystalFonts CFA633USB & PFSense - cant get LCDProc to work
-
Hey All, Did you end up fixing this issue? i am having the exact same issue with my LCD (Same Model) and pfsense :(
-
Life got in the way, so I was not able to look into it until now.
I found out that the LCD is on port ugen3.2. This is not a port I can select in the LCDproc settings. No idea where to go from here….
Anyone have some pointers?
-
Can you ssh or console to your pfsense box? If so, do "ls -ltr /dev | grep cua", make a note of what is there. Then unplug the LCD if it's plugged in or plug it in if it's not and redo the ls -ltr /dev | grep cua. The difference will be the device assigned to the LCD.
ugen is the USB generic interface; the cu is a serial device interface overlaid on the ugen, so yes, telling LCDProc to use ugen instead of cu will cause problems (LCDProc is treating it as a serial port, the ugen interface does not handle serial protocol directly)It will probably be named cuau### (notice the extra u after cua) based on your screen shot I would try /dev/cuau0.
-
It looks like the LCD is on cuaU0, when I unplugged it cuaU0 disappeared.
I set LCDProc to use cuaU0, but the LCDProc service still is not starting. I get the following error in the system log like before:
Oct 6 15:36:29 LCDd: LCDd version 0.5.7 starting Oct 6 15:36:29 LCDd: Using Configuration File: /usr/pbi/lcdproc-amd64/local/etc/LCDd.conf Oct 6 15:36:29 LCDd: Listening for queries on 127.0.0.1:13666 Oct 6 15:36:29 LCDd: Could not open driver module /usr/local/lib/lcdproc/CFontz633.so: Cannot open "/usr/pbi/lcdproc-amd64/local/lib/lcdproc/CFontz633.so" Oct 6 15:36:29 LCDd: Driver [CFontz633] binding failed Oct 6 15:36:29 LCDd: Could not load driver CFontz633 Oct 6 15:36:29 LCDd: There is no output driver Oct 6 15:36:29 LCDd: Critical error while initializing, abort. Oct 6 15:36:35 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)EDIT: The CFontz633.so driver is totally missing from the /usr/pbi/lcdproc-amd64/local/lib/lcdproc/ directory. This explains why it is throwing the error.
-
so /usr/local/lib/lcdproc/CFontz633.so is symlinked to /usr/pbi/lcdproc-amd64/local/lib/lcdproc/CFontz633.so?
It could be that the package install put it in a different place or is broken (I have not tried to down load it, I don't have a display).
Next thing I'd try from ssh or console:
find / -name "CFontz633*" -printYou may get lucky and find it installed in a different directory.
Another option would be uninstall lcdproc, redownload the package and then reinstall.
-
I reinstalled it - both the dev and the regular version lack the driver. I found an old package with the CFontz633.so driver in place, so I uploaded that to the PFSense box after extracting it from the package on my Windows desktop. Unfortunately said driver seems to be unsupported:
Oct 6 17:12:26 LCDd: Could not open driver module /usr/pbi/lcdproc-amd64/local/lib/lcdproc: /usr/pbi/lcdproc-amd64/local/lib/lcdproc/CFontz633.so: unsupported file layout -
I reinstalled it - both the dev and the regular version lack the driver. I found an old package with the CFontz633.so driver in place, so I uploaded that to the PFSense box after extracting it from the package on my Windows desktop. Unfortunately said driver seems to be unsupported:
Oct 6 17:12:26 LCDd: Could not open driver module /usr/pbi/lcdproc-amd64/local/lib/lcdproc: /usr/pbi/lcdproc-amd64/local/lib/lcdproc/CFontz633.so: unsupported file layoutWell, I'm out of ideas; you may have more luck in the packages subforum or asking package maintainers.
In the package you installed, is there a CFontzPacket.so? If so, copy and rename that to CFontz633.so. If not try doing:
Google for "freebsd 10 lcdproc package" you should be able to find the .txz package file for amd64. download it, tar Jxvf <file>.txz, then look for CFontzPacket.so and cp/rename that to CFontz633.so</file> -
Actually, I just got some progress. I installed the dev version of LCDProc, selected the Packet driver, set the baud rate to 19200, and the interface to cuaU0. It light up with "Thanks for using pfsense!"
Finally something different than the CFA633 boot rom message.
I cant seem to get it to show any information like load, or uptime. Just the welcome message. At least I know the system can talk to the display… :)
-
Actually, I just got some progress. I installed the dev version of LCDProc, selected the Packet driver, set the baud rate to 19200, and the interface to cuaU0. It light up with "Thanks for using pfsense!"
Finally something different than the CFA633 boot rom message.
I cant seem to get it to show any information like load, or uptime. Just the welcome message. At least I know the system can talk to the display… :)
Good. They may have renamed the drivers and such along the way so the CFontz633.so is invalid. Now I really have no ideas on how to get it to display anything else.
-
Went into the config of LCDProc, changed the server IP from 127.0.0.1 to localhost. Now it is working perfectly.
Success! :D Thanks for the help mer.
Now my PFSense box is completely set up at last. Hopefully this C2D machine can last for some years more, I dont see the point in replacing the motherboard and CPU yet as the 2.2ghz Core 2 Duo is not heavy on power and handles the load of my WAN connection (150mbps) perfectly.
-
Cool. I may have to pick one of those up and muck around.