PCEngines APU - Booting NanoBSD from SDCard - without having another BSD

Guest

@gonzopancho:

Have you considered buying your APU from the pfSense store?

Then it "just works".

IJS…

If you're using the Image on SD Card you should have the same problem. "Just works" means for me, that you have not the same buildup. Perphaps I've got a good reason for that build up?
And no, I use PCEngines not only for PFSense. And I'm buying stuff anytime in the same country as I live, when there is no good reason against it. Buying PCEngines hardware elsewhere is no possibility

We are pfSense. We have a custom version (because we can do that).

nscheffer

Hi gonzopancho,

When you say we "are" pfsense and you have a special built to fully support the APU1C do you mean that you could have also a built supporting an APU1C including a 3G or 4G modem (miniPCIe slot) like the Sierra MC8801 or MC7304, LEDs working fine, Thermal sensors, reset button and so on ?

Thanks

Nicolas

GLR

Hello,

I don't understand and I am becoming crazy because on my side, following this same procedure, it simply doesn't work.

I wrote the image pfSense-2.1.2-RELEASE-4g-amd64-nanobsd-20140410-0542.img to the SD card, booted the APU1c, interrupted the boot and typed the command set kern.cam.boot.delay=10000, but root mounting still fails :

Consoles: serial port
BIOS drive C: is disk0
BIOS 639kB/2064811kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1
(root@pf2.1.1_amd64.pfsense.org, Thu Apr 10 06:26:53 EDT 2014)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x8d2938 data=0x555948+0xc24e0 syms=[0x8+0xe4000+0x8+0xd2118]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 4 seconds...

Type '?' for a list of commands, 'help' for more detailed help.
OK set kern.cam.boot.delay=10000
OK boot
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p15 #0: Thu Apr 10 06:39:47 EDT 2014
    root@pf2.1.1_amd64.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap.8.amd64 amd64

…

ugen6.2: <generic>at usbus6
umass0: <generic 0="" 2="" flash="" card="" readerwriter,="" class="" 0,="" rev="" 2.01="" 1.00,="" addr="">on usbus6
Root mount waiting for: usbus6
Trying to mount root from ufs:/dev/ufs/pfsense0
ROOT MOUNT ERROR:
If you have invalid mount options, reboot, and first try the following from
the loader prompt:

     set vfs.root.mountfrom.options=rw

and then remove invalid mount options from /etc/fstab.

Loader variables:
vfs.root.mountfrom=ufs:/dev/ufs/pfsense0
vfs.root.mountfrom.options=ro,sync,noatime

Manual root filesystem specification:
  <fstype>:<device>Mount <device>using filesystem <fstype>eg. ufs:/dev/da0s1a
                       eg. cd9660:/dev/acd0
                       This is equivalent to: mount -t cd9660 /dev/acd0 /

  ?                  List valid disk boot devices
  <empty line="">Abort manual input</empty></fstype></device></device></fstype></generic></generic>

Any thought ?

GruensFroeschli

You need to set


kern.cam.boot_delay=10000

NOT
kern.cam.boot.delay=10000

GLR

OMG, this silly typo in the APU topic : https://forum.pfsense.org/index.php?topic=59555.msg406438#msg406438 !
It leaded me to lost several hours :-(
Thanks a lot to you however !

GruensFroeschli

Hehe. I thought i caught all posts of this typo.
Apparently missed one ^^"
The linked post is now edited.

GLR

Great, thanks.

And here above :

echo kern.cam.boot_delay=10000 >> /boot/loader.conf

Save/Load from path: /boot/loader.conf

.local is missing

Guest

@nscheffer:

Hi gonzopancho,

When you say we "are" pfsense and you have a special built to fully support the APU1C do you mean that you could have also a built supporting an APU1C including a 3G or 4G modem (miniPCIe slot) like the Sierra MC8801 or MC7304, LEDs working fine, Thermal sensors, reset button and so on ?

Thanks

Nicolas

I haven't bothered testing 3G/4G modems in the miniPCIe sockets.

But otherwise, yes.

piwwo

This STILL doesn't work >:(


Welcome to minicom 2.7

PC Engines APU BIOS build date: Apr  5 2014
Reading data from file [bootorder]
SeaBIOS (version ?-20140405_120742-frink)
SeaBIOS (version ?-20140405_120742-frink)
Found coreboot cbmem console @ df150400
Found mainboard PC Engines APU
Relocating init from 0x000e8e71 to 0xdf1065e0 (size 39259)
Found CBFS header at 0xfffffb90
found file "bootorder" in cbmem
CPU Mhz=1000
Found 27 PCI devices (max PCI bus is 05)
Copying PIR from 0xdf160400 to 0x000f27a0
Copying MPTABLE from 0xdf161400/df161410 to 0x000f25b0 with length 1ec
Copying ACPI RSDP from 0xdf162400 to 0x000f2590
Copying SMBIOS entry point from 0xdf16d800 to 0x000f2570
Using pmtimer, ioport 0x808
Scan for VGA option rom
EHCI init on dev 00:12.2 (regs=0xf7f08420)
Found 1 lpt ports
Found 2 serial ports
AHCI controller at 11.0, iobase f7f08000, irq 11
EHCI init on dev 00:13.2 (regs=0xf7f08520)
EHCI init on dev 00:16.2 (regs=0xf7f08620)
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
AHCI/0: registering: "AHCI/0: TS32GMSA340 ATA-9 Hard-Disk (30533 MiBytes)"
Searching bootorder for: /rom@img/setup
Searching bootorder for: /rom@img/memtest
OHCI init on dev 00:12.0 (regs=0xf7f04000)
OHCI init on dev 00:13.0 (regs=0xf7f05000)
Searching bootorder for: /pci@i0cf8/usb@12,2/storage@1/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@1
OHCI init on dev 00:14.5 (regs=0xf7f06000)
OHCI init on dev 00:16.0 (regs=0xf7f07000)
Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
USB MSC vendor='Multiple' product='Card  Reader' rev='1.00' type=0 removable=1
Device reports MEDIUM NOT PRESENT
scsi_is_ready returned -1
Unable to configure USB MSC drive.
Unable to configure USB MSC device.
USB MSC vendor='ADATA' product='USB Flash Drive' rev='1100' type=0 removable=1
USB MSC blksize=512 sectors=15572992
All threads complete.
Scan for option roms
Running option rom at c000:0003

          __ ____                          
   _ __  / _/ ___|  ___ _ __  ___  ___     
  | '_ \| |_\___ \ / _ \ '_ \/ __|/ _ \    
  | |_) |  _|___) |  __/ | | \__ \  __/    
  | .__/|_| |____/ \___|_| |_|___/\___|    
  |_|                                      

 +------------Welcome to pfSense-----------+                             
 |                                         |                 ______         
 |  1\. Boot Multi User [Enter]             |                /      \        
 |  2\. Boot [s]ingle User                  |          _____/    f   \       
 |  3\. [Esc]ape to loader prompt           |         /     \        /       
 |  4\. Reboot                              |        /   p   \______/  Sense 
 |                                         |        \       /      \        
 |  Options:                               |         \_____/        \       
 |  5\. [K]ernel: kernel (1 of 2)           |               \        /       
 |  6\. Configure Boot [O]ptions...         |                \______/        
 |                                         |                             
 |                                         |                             
 |                                         |
 +-----------------------------------------+

|
To get back to the menu, type `menu' and press ENTER
or type `boot' and press ENTER to start pfSense.

Type '?' for a list of commands, 'help' for more detailed help.

OK set kern.cam.boot_delay=10000
OK show
LINES=24
ansi_caption[1]=Boot Multi User [Enter]
ansi_caption[2]=Boot Single User
ansi_caption[3]=Escape to loader prompt
ansi_caption[5]=Kernel: default/kernel (1 of 2)
ansi_caption[5][0]=Kernel: default/kernel (1 of 2)
ansi_caption[5][1]=Kernel: kernel.old (2 of 2)
ansi_caption[6]=Configure Boot Options...
autoboot_delay=NO
boot_multicons=YES
boot_serial=YES
bootfile=kernel
comconsole_pcidev=
comconsole_port=1016
comconsole_speed=115200
console=comconsole,vidconsole
currdev=disk0s4a:
hint.acpi.0.oem=CORE  
hint.acpi.0.revision=1
hint.acpi.0.rsdp=0x000f2590
hint.acpi.0.rsdt=0xdf162424
hint.apm.0.disabled=1
hint.apm.0.flags=0x20
hint.ata.0.at=isa                                       
hint.ata.0.irq=14                                       
hint.ata.0.port=0x1F0                                   
hint.ata.1.at=isa                                       
hint.ata.1.irq=15                                       
hint.ata.1.port=0x170                                   
hint.atkbd.0.at=atkbdc                                  
hint.atkbd.0.irq=1                                      
hint.atkbdc.0.at=isa                                    
hint.atkbdc.0.port=0x060                                
hint.atrtc.0.at=isa                                     
hint.atrtc.0.irq=8                                      
hint.atrtc.0.port=0x70                                  
hint.attimer.0.at=isa                                   
hint.attimer.0.irq=0                                    
hint.attimer.0.port=0x40                                
hint.fd.0.at=fdc0                                       
hint.fd.0.drive=0                                       
hint.fd.1.at=fdc0                                       
hint.fd.1.drive=1                                       
hint.fdc.0.at=isa                                       
hint.fdc.0.drq=2                                        
hint.fdc.0.irq=6                                        
hint.fdc.0.port=0x3F0                                   
hint.ppc.0.at=isa                                       
hint.ppc.0.irq=7                                        
hint.psm.0.at=atkbdc                                    
hint.psm.0.irq=12                                       
hint.sc.0.at=isa                                        
hint.sc.0.flags=0x100                                   
hint.uart.0.at=isa                                      
hint.uart.0.flags=0x10                                  
hint.uart.0.irq=4                                       
hint.uart.0.port=0x3F8                                  
hint.uart.1.at=isa                                      
hint.uart.1.irq=3                                       
hint.uart.1.port=0x2F8                                  
hint.wbwd.0.at=isa                                      
hw.uart.console=io:1016,br:115200                       
interpret=OK                                            
kern.cam.boot_delay=10000                               
kernel=kernel                                           
kernel[0]=kernel                                        
kernel[1]=kernel.old                                    
kernel_options=                                         
loaddev=disk0s4a:                                       
loader_color=NO                                         
loader_conf_files=/boot/device.hints /boot/loader.conf /boot/loader.conf.local
mac_ifoff=NO                                            
mainansi_caption[1]=Boot Multi User [Enter]             
mainansi_caption[2]=Boot Single User                    
mainansi_caption[3]=Escape to loader prompt             
mainansi_caption[6]=Configure Boot Options...           
mainmenu_caption[1]=Boot Multi User [Enter]             
mainmenu_caption[2]=Boot [s]ingle User                  
mainmenu_caption[3]=[Esc]ape to loader prompt           
mainmenu_caption[6]=Configure Boot [O]ptions...         
mainmenu_command[1]=boot                                
mainmenu_command[2]=altboot                             
mainmenu_command[3]=goto_prompt                         
mainmenu_command[5]=cycle_kernel                        
mainmenu_command[6]=2 goto_menu                         
mainmenu_init[1]=init_boot                              
mainmenu_init[2]=init_altboot                           
mainmenu_kernel=5                                       
mainmenu_keycode[3]=27                                  
mainmenu_keycode[5]=107                                 
mainmenu_keycode[6]=111                                 
mainmenu_options=5                                      
mainmenu_reboot=                                        
maintoggled_ansi[1]=Boot Single User [Enter]            
maintoggled_ansi[2]=Boot Multi User                     
maintoggled_text[1]=Boot [s]ingle User [Enter]          
maintoggled_text[2]=Boot [M]ulti User                   
menu_caption[1]=Boot Multi User [Enter]                 
menu_caption[2]=Boot [s]ingle User                      
menu_caption[3]=[Esc]ape to loader prompt               
menu_caption[5]=[K]ernel: kernel (1 of 2)               
menu_caption[5][0]=[K]ernel: kernel (1 of 2)            
menu_caption[5][1]=[K]ernel: kernel.old (2 of 2)        
menu_caption[6]=Configure Boot [O]ptions...             
menu_command[1]=boot                                    
menu_command[2]=altboot                                 
menu_command[3]=goto_prompt                             
menu_command[5]=cycle_kernel                            
menu_command[6]=2 goto_menu
menu_init[1]=init_boot
menu_init[2]=init_altboot
menu_kernel=5
menu_keycode[1]=98
menu_keycode[2]=115
menu_keycode[3]=27
menu_keycode[5]=107
menu_keycode[6]=111
menu_options=5
menu_reboot=
menu_timeout_command=boot
menuset_initial=1
menuset_name1=main
menuset_name2=options
module_path=/boot/modules
optionsansi_caption[1]=Back to Main Menu [Backspace]
optionsansi_caption[2]=Load System Defaults
optionsansi_caption[3]=ACPI Support Off
optionsansi_caption[4]=Safe Mode... Off
optionsansi_caption[5]=Single User. Off
optionsansi_caption[6]=Verbose..... Off
optionsmenu_acpi=3                                      
optionsmenu_caption[1]=Back to Main Menu [Backspace]
optionsmenu_caption[2]=Load System [D]efaults
optionsmenu_caption[3]=[A]CPI Support off
optionsmenu_caption[4]=Safe [M]ode... off
optionsmenu_caption[5]=[s]ingle User. off
optionsmenu_caption[6]=[V]erbose..... off
optionsmenu_command[1]=1 goto_menu
optionsmenu_command[2]=set_default_boot_options
optionsmenu_command[3]=toggle_acpi
optionsmenu_command[4]=toggle_safemode
optionsmenu_command[5]=toggle_singleuser
optionsmenu_command[6]=toggle_verbose
optionsmenu_init[4]=init_safemode
optionsmenu_init[5]=init_singleuser
optionsmenu_init[6]=init_verbose
optionsmenu_keycode[1]=8
optionsmenu_keycode[2]=100
optionsmenu_keycode[3]=97
optionsmenu_keycode[4]=109
optionsmenu_keycode[5]=115
optionsmenu_keycode[6]=118
optionsmenu_options=3
optionsmenu_optionstext=Boot Options:                   
optionstoggled_ansi[3]=ACPI Support On
optionstoggled_ansi[4]=Safe Mode... On
optionstoggled_ansi[5]=Single User. On
optionstoggled_ansi[6]=Verbose..... On
optionstoggled_text[3]=[A]CPI Support On
optionstoggled_text[4]=Safe [M]ode... On
optionstoggled_text[5]=[s]ingle User. On
optionstoggled_text[6]=[V]erbose..... On
prompt=${interpret}
smbios.bios.reldate=04/05/2014
smbios.bios.vendor=coreboot
smbios.bios.version=SageBios_PCEngines_APU-45
smbios.chassis.maker=PC Engines
smbios.socket.enabled=1
smbios.socket.populated=1
smbios.system.maker=PC Engines
smbios.system.product=APU
smbios.system.serial=980545
smbios.system.version=1.0
smbios.version=2.7
toggled_ansi[1]=Boot Single User [Enter]
toggled_ansi[2]=Boot Multi User
toggled_text[1]=Boot [s]ingle User [Enter]              
toggled_text[2]=Boot [M]ulti User
OK 
OK  
OK boot
/boot/kernel/kernel text=0x1230515 data=0x835970+0x28f360 syms=[0x4+0xf7490+0x4+0x170be5]
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
507904K of memory above 4GB ignored
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p15 #0 c5ab052(releng/10.1)-dirty: Sat Jul 25 20:25:50 CDT 2015
    root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_SMP.10 i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: AMD G-T40E Processor (1000.02-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x500f20  Family = 0x14  Model = 0x2  Stepping = 0
  Features=0x178bfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt>Features2=0x802209 <sse3,mon,ssse3,cx16,popcnt>AMD Features=0x2e500800 <syscall,nx,mmx+,ffxsr,page1gb,rdtscp,lm>AMD Features2=0x35ff <lahf,cmp,svm,extapic,cr8,abm,sse4a,mas,prefetch,ibs,skinit,wdt>TSC: P-state invariant, performance statistics
real memory  = 3742687232 (3569 MB)
avail memory = 3641274368 (3472 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <core  coreboot="">
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
random device not loaded; using insecure entropy
ioapic0 <version 2.1=""> irqs 0-23 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0813d20, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0813dd0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0813e80, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xc083c4b0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc083c560, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc083c610, 0) error 1
wlan: mac acl policy registered
kbd0 at kbdmux0
random: <software, yarrow=""> initialized
module_register_init: MOD_LOAD (vesa, 0xc1229830, 0) error 19
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <core coreboot=""> on motherboard
acpi0: Power Button (fixed)
cpu0: <acpi cpu=""> on acpi0
cpu1: <acpi cpu=""> on acpi0
atrtc0: <at realtime="" clock=""> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer=""> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus=""> on pcib0
pcib1: <acpi pci-pci="" bridge=""> irq 16 at device 4.0 on pci0
pci1: <acpi pci="" bus=""> on pcib1
re0: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <mii bus=""> on re0
rgephy0: <rtl8169s 8211="" 8110s="" 1000base-t="" media="" interface=""> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000w
re0: Ethernet address: 00:0d:b9:3b:da:04
pcib2: <acpi pci-pci="" bridge=""> irq 17 at device 5.0 on pci0
pci2: <acpi pci="" bus=""> on pcib2
re1: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <mii bus=""> on re1
rgephy1: <rtl8169s 8211="" 8110s="" 1000base-t="" media="" interface=""> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000w
re1: Ethernet address: 00:0d:b9:3b:da:05
pcib3: <acpi pci-pci="" bridge=""> irq 18 at device 6.0 on pci0
pci3: <acpi pci="" bus=""> on pcib3
re2: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <mii bus=""> on re2
rgephy2: <rtl8169s 8211="" 8110s="" 1000base-t="" media="" interface=""> PHY 1 on miibus2
rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000w
re2: Ethernet address: 00:0d:b9:3b:da:06
ahci0: <amd sb7x0="" sb8x0="" sb9x0="" ahci="" sata="" controller=""> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f08000-0xf7f083ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <ahci channel=""> at channel 0 on ahci0
ahcich1: <ahci channel=""> at channel 1 on ahci0
ahcich2: <ahci channel=""> at channel 2 on ahci0
ahcich3: <ahci channel=""> at channel 3 on ahci0
ahcich4: <ahci channel=""> at channel 4 on ahci0
ahcich5: <ahci channel=""> at channel 5 on ahci0
ohci0: <amd sb7x0="" sb8x0="" sb9x0="" usb="" controller=""> mem 0xf7f04000-0xf7f04fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <amd sb7x0="" sb8x0="" sb9x0="" usb="" 2.0="" controller=""> mem 0xf7f08400-0xf7f084ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <amd sb7x0="" sb8x0="" sb9x0="" usb="" controller=""> mem 0xf7f05000-0xf7f05fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <amd sb7x0="" sb8x0="" sb9x0="" usb="" 2.0="" controller=""> mem 0xf7f08500-0xf7f085ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <pci-isa bridge=""> at device 20.3 on pci0
isa0: <isa bus=""> on isab0
pcib4: <acpi pci-pci="" bridge=""> at device 20.4 on pci0
pci4: <acpi pci="" bus=""> on pcib4
ohci2: <amd sb7x0="" sb8x0="" sb9x0="" usb="" controller=""> mem 0xf7f06000-0xf7f06fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
pcib5: <acpi pci-pci="" bridge=""> at device 21.0 on pci0
pci5: <acpi pci="" bus=""> on pcib5
ohci3: <amd sb7x0="" sb8x0="" sb9x0="" usb="" controller=""> mem 0xf7f07000-0xf7f07fff at device 22.0 on pci0
usbus5 on ohci3
ehci2: <amd sb7x0="" sb8x0="" sb9x0="" usb="" 2.0="" controller=""> mem 0xf7f08600-0xf7f086ff at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
acpi_button0: <power button=""> on acpi0
pmtimer0 on isa0
orm0: <isa option="" rom=""> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
gpioapu0: Environment returned APU
gpioapu0: Address on reg 0x24 is 0xfed80000/4275568640
gpioapu0 at iomem 0xfed80100-0xfed801ff on isa0
ata0: <ata channel=""> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ata channel=""> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: <parallel port=""> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <parallel port="" bus=""> on ppc0
lpt0: <printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <parallel i="" o=""> on ppbus0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
acpi_throttle0: <acpi cpu="" throttling=""> on cpu0
acpi_throttle1: <acpi cpu="" throttling=""> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <ati> at usbus0
uhub0: <ati 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0
ugen1.1: <ati> at usbus1
uhub1: <ati 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus1
ugen2.1: <ati> at usbus2
uhub2: <ati 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus2
ugen3.1: <ati> at usbus3
uhub3: <ati 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen4.1: <ati> at usbus4
uhub4: <ati 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus4
ugen5.1: <ati> at usbus5
uhub5: <ati 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus5
ugen6.1: <ati> at usbus6
uhub6: <ati 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus6
random: unblocking device.
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ts32gmsa340 svn423b=""> ATA-9 SATA 3.x device
ada0: Serial Number 20141210B89443121156
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
uhub4: 2 ports with 2 removable, self powered
uhub0: 5 ports with 5 removable, self powered
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1000023251 Hz quality 800
Root mount waiting for: usbus6 usbus5 usbus3 usbus2 usbus1
uhub2: 5 ports with 5 removable, self powered
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: usbus6 usbus3 usbus1
uhub6: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ugen6.2: <generic> at usbus6
umass0: <generic 0="" 2="" flash="" card="" readerwriter,="" class="" 0,="" rev="" 2.01="" 1.00,="" addr=""> on usbus6
Root mount waiting for: usbus1
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <multiple card ="" reader="" 1.00=""> Removable Direct Access SCSI-4 device 
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2 <no_6_byte>Root mount waiting for: usbus1
ugen1.2: <adata> at usbus1
umass1: <adata 0="" 2="" adata="" usb="" flash="" drive,="" class="" 0,="" rev="" 2.10="" 11.00,="" addr=""> on usbus1
Trying to mount root from ufs:/dev/ufs/pfSense [ro]...
mountroot: waiting for device /dev/ufs/pfSense ...
da1 at umass-sim1 bus 1 scbus9 target 0 lun 0
da1: <adata 1100="" usb="" flash="" drive=""> Removable Direct Access SCSI-6 device 
da1: Serial Number 13A2813592280025
da1: 40.000MB/s transfers
da1: 0MB (1 512 byte sectors: 64H 32S/T 0C)
da1: quirks=0x2 <no_6_byte>GEOM_PART: integrity check failed (da1, MBR)
GEOM_PART: integrity check failed (diskid/DISK-13A2813592280025, MBR)
Mounting from ufs:/dev/ufs/pfSense failed with error 19.

Loader variables:
  vfs.root.mountfrom=ufs:/dev/ufs/pfSense
  vfs.root.mountfrom.options=ro

Manual root filesystem specification:
  <fstype>: <device>[options]
      Mount <device> using filesystem <fstype>
      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a
        zfs:tank
        cd9660:/dev/acd0 ro
          (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)

  ?               List valid disk boot devices
  .               Yield 1 second (for background tasks)
  <empty line="">    Abort manual input

mountroot> ufs:/dev/ufs/pfsense0
Invalid file system specification.

mountroot> ufs:/deb/ufs/pfsense
Trying to mount root from ufs:/deb/ufs/pfsense []...
mountroot: waiting for device /deb/ufs/pfsense ...
Mounting from ufs:/deb/ufs/pfsense failed with error 19.

mountroot> ufs:/dev/ufs/pfsense
Trying to mount root from ufs:/dev/ufs/pfsense []...
mountroot: waiting for device /dev/ufs/pfsense ...
Mounting from ufs:/dev/ufs/pfsense failed with error 19.

mountroot> ufs:/dev/da0 
Trying to mount root from ufs:/dev/da0 []...
g_vfs_done():da0[READ(offset=65536, length=8192)]error = 6
Mounting from ufs:/dev/da0 failed with error 6.

mountroot> show
Invalid file system specification.

mountroot> ?

List of GEOM managed disk devices:
  diskid/DISK-13A2813592280025 da1 da0 diskid/DISK-20141210B89443121156 ada0

mountroot> ufs:/dev/da1
Trying to mount root from ufs:/dev/da1 []...
g_vfs_done():da1[READ(offset=65536, length=8192)]error = 5
Mounting from ufs:/dev/da1 failed with error 5.

mountroot> ufs:/dev/ada0
Trying to mount root from ufs:/dev/ada0 []...
Mounting from ufs:/dev/ada0 failed with error 22.

mountroot> 

wtf[/s][/s][/s][/s][/s][/s][/s]</empty></fstype></device></device></fstype></no_6_byte></adata></adata></adata></no_6_byte></multiple></generic></generic></ts32gmsa340></ati></ati></ati></ati></ati></ati></ati></ati></ati></ati></ati></ati></ati></ati></acpi></acpi></parallel></printer></parallel></parallel></ata></ata></isa></power></amd></amd></acpi></acpi></amd></acpi></acpi></isa></pci-isa></amd></amd></amd></amd></ahci></ahci></ahci></ahci></ahci></ahci></amd></rtl8169s></mii></realtek></acpi></acpi></rtl8169s></mii></realtek></acpi></acpi></rtl8169s></mii></realtek></acpi></acpi></acpi></acpi></high></at></at></acpi></acpi></core></software></software,></version></core ></lahf,cmp,svm,extapic,cr8,abm,sse4a,mas,prefetch,ibs,skinit,wdt></syscall,nx,mmx+,ffxsr,page1gb,rdtscp,lm></sse3,mon,ssse3,cx16,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt>

rmaeder

I couldn't get the embedded version (pfSense-2.2.5-RELEASE-4g-amd64-nanobsd.img.gz) on a 4GB SD card to work on an apu1d either.

umass0: <generic 0="" 2="" flash="" card="" readerwriter,="" class="" 0,="" rev="" 2.01="" 1.00,="" addr="">on 6
Trying to mount root from ufs:/dev/ufs/pfsense0 [ro,sync,noatime]...
mountroot: waiting for device /dev/ufs/pfsense0 ...
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: 3796MB (7774208 512 byte sectors: 255H 63S/T 483C)
da0: quirks=0x2 <no_6_byte>GEOM_PART: integrity check failed (da0, MBR)
GEOM_PART: integrity check failed (diskid/DISK-058F63666485, MBR)
GEOM_PART: integrity check failed (da0, MBR)
Mounting from ufs:/dev/ufs/pfsense0 failed with error 19.</no_6_byte></generic>

None of the variable tweaks suggested in various places, such as

set kern.cam.boot_delay=10000
set hw.ata.atapi_dma="1"
set hw.ata.ata_dma="1"
set hw.ata.wc="1"

had any effect.
I tried writing the card on an SD-USB adaptor (as /dev/sdX) and also a laptop with a native SD interface, where it showed up as /dev/mmcblk0. No difference.

In the end I wrote a live image on an USB stick and used that to boot, then install onto the same SD card. This went fine, and with /var and /tmp in RAM, writes to the SD card should be minimal, so not using the embedded version shouldn't be a problem, I assume.

doktornotor

Well, clearly the image got either miswritten, or your SD is too small for 4GB to fit on it. Try with 2GB one instead.