PFsense machine getting very hot with CPU around 100%
-
The problem is not on the fan, the Thin Client is almost new (3 months), without any dust and the fan runs cool, if before installed PFsense I had installed other OS and even the Windows version for thin client and the machine won't get so hot, the problem should be in some drivers maybe from the FreeBSD, I had no problems with linux and windows, so whats causing this on PFsense?
Thanks.
-
Dude, it's irrelevant. If your CPU being used heats it up to 90ºC, your problem is shitty cooling.
-
Sorry but I don't agree with you, last week I was testing IPfire (linux) and the CPU never goes more than 55 ºC even with teh CPU around 70%. It must be something else, later at home I will install Windows and run some stress tools to see if the machine gets so hot, but I still say that it must be something on the kernel drivers for FreeBSD relating that hardware that it not working.
Thanks.
-
And it still doesn't matter, your CPU/case cooling is stil the same shit. Look: it's just shit:
-
It's not shit but it's laptop cooling and regulation. Look for fan speed settings in BIOS. It's not uncommon that laptops get heat problems under load with other OS:es than Windows.
-
I have this problem with one of my main systems. For mine its just reporting. It has IPMI so I can check the temperatures a different way. CPU temp reported by the GUI is 66 C and the temp reported by IMPI is 32 C. When I was on 2.1.5, it reported the temperature correctly, or at least a lot closer.
-
@pLu:
It's not shit but it's laptop cooling and regulation. Look for fan speed settings in BIOS. It's not uncommon that laptops get heat problems under load with other OS:es than Windows.
The problem is that when the computer boots the CPU has heavy load (90-95%) then after 3-4 minutes goes down until 10-20% load and the temperature still goes up, I will replace the Fan with a more powerful and see what it happens.
Thanks.
-
20% load.. WHAT is causing that? You still haven't answered that question.
-
20% load.. WHAT is causing that? You still haven't answered that question.
Hi,
That's because I was using Squid Proxy but when I uninstalled it the CPU was almost all time idle but in fact that hasn't changed the high temperatures.
BTW: I've installed just for testing this weekend the OPNSense, I couldn't see the temperatures on the GUI but the machine was WARM no so hot that it almost burns my fingers when I've installed PFSense, so this could not be a FAN problem.
Thanks.
Crisman -
This is still extremely amusing. Of course it IS shitty cooling design problem. What happens when your CPU is used? The machine will melt the plastic, or what? Horrible fan, horrible heatsink, horrible airflow in the case. Why people would buy crap like this goes beyond me. RMA the shit. The whole thing is like a poorly designed laptop without LCD.
-
BTW: I've installed just for testing this weekend the OPNSense, I couldn't see the temperatures on the GUI but the machine was WARM no so hot that it almost burns my fingers when I've installed PFSense, so this could not be a FAN problem.
sysctl -a | grep tempHow can it not be a fan problem?
-
Hi
I don't think it's a fan problem, but we need evidence of what processes are running and what your CPUs are busy doing.
Here is mine for example… (Diagnostics menu / system activity)last pid: 85388; load averages: 0.00, 0.01, 0.00 up 171+01:28:55 20:04:35
151 processes: 5 running, 120 sleeping, 26 waitingMem: 35M Active, 292M Inact, 258M Wired, 52K Cache, 279M Buf, 3357M Free
Swap: 8192M Total, 8192M FreePID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND
11 root 155 ki31 0K 64K CPU3 3 25.4H 100.00% [idle{idle: cpu3}]
11 root 155 ki31 0K 64K CPU2 2 25.4H 100.00% [idle{idle: cpu2}]
11 root 155 ki31 0K 64K RUN 1 25.4H 100.00% [idle{idle: cpu1}]
11 root 155 ki31 0K 64K CPU0 0 25.3H 100.00% [idle{idle: cpu0}]
81695 root 22 0 223M 31856K piperd 0 0:00 0.68% php-fpm: pool lighty (php-fpm)
0 root -16 0 0K 192K swapin 0 2:09 0.00% [kernel{swapper}]
12 root -92 - 0K 416K WAIT 0 1:17 0.00% [intr{irq24: bge0}]
6 root -16 - 0K 16K pftm 0 1:15 0.00% [pf purge]
9196 proxy 20 0 220M 105M kqread 1 0:53 0.00% (squid-1) -f /usr/pbi/squid-amd64/local/et
12 root -92 - 0K 416K WAIT 2 0:47 0.00% [intr{irq25: bge1}]
12 root -60 - 0K 416K WAIT 3 0:30 0.00% [intr{swi4: clock}]
23 root 16 - 0K 16K syncer 0 0:27 0.00% [syncer]
12 root -88 - 0K 416K WAIT 0 0:21 0.00% [intr{irq16: uhci0 uhc}]
46258 root 52 20 17136K 2348K wait 0 0:20 0.00% /bin/sh /var/db/rrd/updaterrd.sh
24844 root 20 0 12456K 2128K select 3 0:13 0.00% /usr/local/sbin/apinger -c /var/etc/apinge
20836 root 20 0 16804K 2304K bpf 2 0:11 0.00% /usr/local/sbin/filterlog -i pflog0 -p /va
59435 root 20 0 14656K 2336K select 1 0:09 0.00% /usr/sbin/syslogd -s -c -c -l /var/dhcpd/v
15 root -16 - 0K 16K - 0 0:09 0.00% [rand_harvestq]If you can do the same, we can see where the CPU cycles are being used, which will cause the CPU to warm up.