SuperMicro A1SRI-2558F - Flashing LED - Help please
-
Hello,
pfSense newbie here.I just built a pfSense device for home use.
Below is the hardware info:A1SRI-2558F board, 4GB Kingston RAM, Antec ISK 110 VESA Case with PSU and Kingston SSD V100.
When I turned on the system, I see a blinking green led. The manual doesn't have enough information about this.
I can log into the system and set up everything.I Googled this, where someone mentioned that it is the IPMI hearbeat, but I would like to have a confirmation on this.
Having said that - I would happy to run and post any benchmarks on this build.
Thank you.
-D -
When I turned on the system, I see a blinking green led. The manual doesn't have enough information about this.
Which LED is blinking and where, please? Would you please come closer to this point.
I Googled this, where someone mentioned that it is the IPMI hearbeat, but I would like to have a confirmation on this.
It might be more so that the IPMI port was not configured in the BIOS, or?
In some cases the IPMI port is configured as the or a WAN fall back port, could this also matching
to your configuration? -
Take a look at hte manual and search for LED2.
If that's LED you're talking about then yes, that's the BMC heartbeat. The BMC is a component of IPMI.
My 2758f has the same heartbeat.
-
BMC heartbeat…
-
Do you use ECC ram modules?