Unable to authenticate even using radtest using freeRADIUS
-
i did factory default of pfsense and restored using the configuration file exported earlier via builtin backup/restore ..
but after restore same isssue .. as in just above update..Please help
-
Stop restoring broken configuration, perhaps. There's no such nonsense needed to get FreeRADIUS working really. If you followed some god knows what 3+years old howto, simply restart from scratch.
-
Stop restoring broken configuration, perhaps. There's no such nonsense needed to get FreeRADIUS working really. If you followed some god knows what 3+years old howto, simply restart from scratch.
i do not see that guide as invalid ..
so is there anyway to reset the configs of freeradius to default ?
-
Yeah. Edit the stuff out of config.xml backup and restore it.
-
What nano version do you have installed the 4GB one?
If freerad doesn't start its never going to work.. Really all you should have to do is click click to install the package.. I would have to fire up a copy of the nanobsd image to see if that has issues with installing the package? If I get a chance to convert it to a vmdk I will boot it on my vm host and see if installs the package ok, etc.
-
Ok, so I converted the img to vmdk, created a 64bit freebsd vm.. Added the disk, booted.. Ran through the config wizard. Click Click on the freerad2 package.. Created an interface, bing bang zoom up and running.
Where in that guide does it have you create the nas/client for your host? You have it listen on 127.0.0.1 (loopback) what IP are you talking from If you went through that guide blind did and not understanding what you were actually doing and just put in 192.168.10.253 like the guide not going to work.. And again if the service never start its never ever going to work..
-
Ok, so I converted the img to vmdk, created a 64bit freebsd vm.. Added the disk, booted.. Ran through the config wizard. Click Click on the freerad2 package.. Created an interface, bing bang zoom up and running.
Where in that guide does it have you create the nas/client for your host? You have it listen on 127.0.0.1 (loopback) what IP are you talking from If you went through that guide blind did and not understanding what you were actually doing and just put in 192.168.10.253 like the guide not going to work.. And again if the service never start its never ever going to work..
Immense thanks for your replies .
yes i am on nanobsd 4gb image. 2gb ram. 32bit one.
ip addressing were obviously as per my setup when i tried to follow that article.i configured nas for my AP but that was not working.
i also setup nas for loopback and tried to test as they said in that article but it wont work .
i only later found that the service was not runing.
it seems that configs are having some issue.
i will try to remove freeradius configs from backuped xml file and will try again Factory defaulting it and restoring with modified backuped file.
Also is it necessary to factory default befor restoring the modified configs ? i mean is a restore overwrite function or a merge ?
-
What nano version do you have installed the 4GB one?
If freerad doesn't start its never going to work.. Really all you should have to do is click click to install the package.. I would have to fire up a copy of the nanobsd image to see if that has issues with installing the package? If I get a chance to convert it to a vmdk I will boot it on my vm host and see if installs the package ok, etc.
i have installed / uninstalled alot of times.
here is a log for reinstal which completes with sucess but cannot start service.
Removing freeradius2 components…
Tabs items... done.
Menu items... done.
Services... done.
Loading package instructions...
Deinstall commands... done.
Removing package instructions...done.
Auxiliary files... done.
Package XML... done.
Configuration... done.
Beginning package installation for freeradius2 .
Downloading package configuration file... done.
Saving updated package information... done.
Downloading freeradius2 and its dependencies...
Checking for package installation... Loading package configuration... done.
Configuring package components...
Loading package configuration... done.
Additional files... done.
Loading package instructions...
Custom commands...
Executing custom_php_install_command()...done.
Executing custom_php_resync_config_command()...done.
Menu items... done.
Integrated Tab items... done.
Services... done.
Writing configuration... done.Package reinstalled.
logs for removal/installaiton wil be posted.
-
I formated the thumb drive.
Using Rufus copied the 32bit nano bsd 4gb 2.2.5
Booted it.Configured interfaces. Changed tmp and var sizes to 250mb.
System is 2gb ram and 1.6ghz1.6ghz atom n270Tried to install free radius and after half hour still hanged / stuck at extracting imageimage.
What's doing this? I had been running snort on it and it was working flawlessly once setup.. And was blocking attackes and I had tuned that…Now no extra package is installed. Also in all of my above tastings though snort was installed but it was disabled on interfaces..
Update :
Accessed pfsense gui from another system. Freeradius is not appearing in ui
But I tried the same image in VMware workstation and it worked perfectly.
Now it certainly is local system issue but no idea what is it.
I have 4gb Kingston usb write speed 7-8 MBps.
In VMware I dd ed the image to a16 gb vmdk harddisk
I should have made it 4gb so that after installation of all required packages I could have dded it to my usb..
For that I need to make sure my vmdk size matches that of usb..
-
"In VMware I dd ed the image to a16 gb vmdk harddisk"
In vm if your using the nano, why would you make it a larger disk.. I just did a convert on the img to vmdk via v2v software.. Booted it.. Not sure why you think you need to change tmp and var sizes??
usb of 7-8MBps?? Uggghhh that is slow… that is not even USB 2 speeds..
-
update:
yesterday i saw an update for freeradius and i reinstaleld it and now all is working.. strange issue …
