Choosing hardware based on throughput performance
-
@BlueKobold,
Thank you for this recommendation. You mention + 8GB of memory, so pfSense would need 8GB of memory on these Celeron boxes, and I will get an mSATA or SATA SSD. I assume 128GB is big enough.
I am going to wait till Black Friday to see if either of these go on special and grab one the cheapest possible.
Thanks again for the info!
-
Oh by the way, my 1gigabit WAN comes in via PPPoE. Are both of these Jetway boxes capable of handling that along with everything else?
Thanks!
-
You mention + 8GB of memory, so pfSense would need 8GB of memory on these Celeron boxes
You might be also lucky with 2 GB or 4 GB of RAM, pending on the installed packets and running services.
and I will get an mSATA or SATA SSD. I assume 128GB is big enough.
For sure it will be really a big one for that.
-
Not sure you can process 1gb via PPPoE because issue #4821 is still not solved.
-
Not sure you can process 1gb via PPPoE because issue #4821 is still not solved.
This is quite right, but on the other side you don´t be able to compare each CPU against another
CPU core because this CPUs are not identically for sure. -
True!
-
Hi all,
Mobo in the house!!! finally.
Still need to wait for the ECC ram (just seen that non-ecc is no longer supported on C2758)
will be back with performance review and maybe new unexpected issues :P
-
@nikkon
What is the vendor and name of the mini ITX-case? -
supermicro
http://www.supermicro.com/products/motherboard/Atom/X10/A1SRi-2758F.cfm -
the board is superb…works and feels damn powerful :)
Tons of CPU settings that i never thought they exist :P
