Dual Wan Question - Routing traffic
-
I load balancing or failover is not a huge concern to me, but here is what I want to do.
I have 2 cable modems 1.) WAN 2.) OPT1
I have 6 computers 192.168.1.100 - 105
I want ALL traffic from 192.168.1.100 - 102 routed to WAN
I want ALL traffic from 192.168.1.103 - 105 routed to OPT1
What process do I need to follow? to make this happen.
TIA
-
Create rules on LAN?
I assume you havent tried but…. It's pretty selfexplaining.
If you really have problems post again. -
Yes I did create rules under firewall > rules > lan
Proto * Source 192.168.1.100 Port * Destination !Lan net Port * Gateway *
and another with the exact same thing except gateway is opt1.
tell me if this is right?
-
1: Create two aliases. Aach contains all the IP's you want to have together in a group.
2: Create two rules that are above the default allow all rule.
3: Set as source in each rule the alias with your IP's.
4: Destination should stay in every rule on *
5: Set as gateway WAN respectively OPT1
6: Leave in the default rule the gateway on *