RRD Graphs - Throughput Not Working
-
The Traffic RRD graphs are built from the output of /sbin/pfctl -vvsI -i <real interface="">by the /var/db/rrd/updaterrd.sh script.
It may be worth trying the pfctl command at the command prompt. For example, on my box:
/sbin/pfctl -vvsI -i pppoe0
pppoe0
Cleared: Sat Nov 7 00:30:51 2015
References: 162
In4/Pass: [ Packets: 1884512 Bytes: 1356895688 ]
In4/Block: [ Packets: 207302 Bytes: 26537135 ]
Out4/Pass: [ Packets: 1677864 Bytes: 190624512 ]
Out4/Block: [ Packets: 0 Bytes: 0 ]
In6/Pass: [ Packets: 923306 Bytes: 699444896 ]
In6/Block: [ Packets: 2787 Bytes: 385954 ]
Out6/Pass: [ Packets: 969469 Bytes: 90639385 ]
Out6/Block: [ Packets: 0 Bytes: 0 ]</real> -
Tried the command, it works great. Is there a way to manually look at the RRD file?
Thanks!
-
rrdtool dump <filename>| less
should do what you want.The RRDtool documentation should guide you further.</filename>
-
Managed to get back to the box and try a few things.
Definitely something munged with the opt1-* data files so after removing the RRD-Summary package I did a second reset of the RRD data.
Everything seems to have come back and I have Throughput graphs again.
I've reinstalled RRD-Summary and will continue to watch as the summary stats will take at least an hour to build.
-
RRD-Summary traffic is beginning to appear and my Throughput graphs are definitely live as well.
I'm willing to chalk this one up to mangled RRD data (perhaps in conjunction with RRD Summary?).
Seems OK for me, the rest of the box is certainly stable and anything else (10+ and counting) I've upgraded to 2.2.5 has been fine.
-
Hmmm … tried another reset of the data here, just in case. Still no joy ... :-(. Is there a way to reinstall / "factory reset" RRD?
Thanks!
-
You could manually clear the RRD files to make sure that the "Reset RRD Data" does indeed clear everything.
The RRD data is in /var/db/rrd, you can just delete everything in that folder and then click on "Reset RRD Data" to make sure the files get rebuilt properly.
In my case I had already removed the RRD Summary package before I did a "full" reset.
You might try a manual wipe and see if the graphs come back, if not try and remove the Summary package and then do a manual wipe.
I was able to successfully add the Summary package back in after I got the Throughput graphs back -
Very odd - I did a manual and full reset, restarted it all (without summary) … data shows up (in the directory), but still no plots. Is there a particular file to look at for throughput?
Thanks!
-
Still fighting with this … :(. Seems it's only the throughput graphs that are broken - all the other RRD plots are fine.
Is there a way to manually "review" the throughput data?
Thanks!
-
FYI, still not working on (fresh upgrade) to 2.2.6.
Thoughts?
Thanks!
