Shell Route silme komutu nedir?

[compher]

Arkadaşlar,

Shell Route eklemiştim, şimdi webconfigurator e erişemiyorum. Silme komutunu verebilir misiniz?

[karakas]

FreeBSD Set a Default Route / Gateway
by NIXCRAFT on JANUARY 13, 2008 · 7 COMMENTS· LAST UPDATED OCTOBER 31, 2008
in FREEBSD, NETWORKING, TROUBLESHOOTING

Q. How do I modify or set a default route for my FreeBSD server? How do I make default route configuration persistent?

A. The route command is used under FreeBSD to manually manipulate the network routing tables. It provides six commands:
=> add : Add a route.

=> flush :Remove all routes.

=> delete : Delete a specific route.

=> change : Change aspects of a route (such as its gateway).

=> get : Lookup and display the route for a destination.

=> monitor : Continuously report any changes to the routing information base, routing lookup misses, or suspected network partitionings.

Task: View / Display FreeBSD Routing Table

Use netstat command with -r option:
$ netstat -r
$ netstat -rn

Output:

Routing tables
Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            61.221.xx.yy      UGS        0      247    em1
10                10.10.110.5        UGS        0      50    em0
10.10.110/26      link#1            UC          0        0    em0
10.10.110.5        00:1b:0d:e6:58:40  UHLW        2        0    em0  1145
61.221.xx.yy/29    link#2            UC          0        0    em1
61.221.xx.yy      00:1b:0d:e6:57:c0  UHLW        2        0    em1  1055
61.221.xx/24      link#2            UC          0        0    em1
127.0.0.1          127.0.0.1          UH          0        0    lo0
The first two line displays default routes.

Task: FreeBSD Set a default route

All network packets that cannot be sent according to the previous entries of the routing table are sent through the following default gateway:

route add default 192.168.1.254

How do I save routing information to a configuration file?

If you reboot FreeBSD box, the routing configuration will be lost i.e. the routing information will not persist. You need to edit /etc/rc.conf file to set defaultroute:

vi /etc/rc.conf

Set default route by editing defaultrouter variable:
defaultrouter="192.168.1.254"

Save and close the file.

Task: Start and Stop FreeBSD Configured Interfaces

To apply changes to a configuration file, you need to stop and restart the corresponding FreeBSD networking interface. The following command will also update routing information:

/etc/rc.d/netif restart

/etc/rc.d/routing stop

/etc/rc.d/routing start