[Resolved ] Vlan not working
-
I have no idea what to tell you to do on Windows.
At this point I suggest you get at least a web-smart switch since it sounds like you really don't quite know what you're looking at.
-
How about you post it so we can see what you've really done.
does it even supports vlan ?
em1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
options=209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic>em0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
options=5219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso>ether 00:10:f3:1b:1f:70
inet6 fe80::210:f3ff:fe1b:1f70%em0 prefixlen 64 scopeid 0x1
inet 192.168.4.10 netmask 0xffffff00 broadcast 192.168.4.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
em0_vlan1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
options=103 <rxcsum,txcsum,tso4>ether 00:10:f3:1b:1f:70
inet6 fe80::210:f3ff:fe1b:1f70%em0_vlan1 prefixlen 64 scopeid 0x11
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 1 vlanpcp: 0 parent interface: em0</full-duplex></performnud,auto_linklocal></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,simplex,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic></up,broadcast,running,simplex,multicast>VLAN_HWTAGGING
Definitely supported. However, I don't see the em0_vlan60 interface. Would be tough to connect on that interface if it didn't exist, no?
-
True. Is it enabled and assigned an IP address, etc?
And, looking closer, there should not be an em0_vlan1 interface. Untagged (default VLAN 1) traffic would simply be on em0, not em0_vlan1.
-
[2.2.6-RELEASE][admin@sed2.local]/root: ifconfig
em0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
options=5219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso>ether 00:10:f3:1b:1f:79
inet6 fe80::210:f3ff:fe1b:1f70%em0 prefixlen 64 scopeid 0x1
inet 192.168.4.10 netmask 0xffffff00 broadcast 192.168.4.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
ath0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 2290
ether 00:22:69:8f:14:a7
nd6 options=21 <performnud,auto_linklocal>media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>status: running
em1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
options=209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic>ether 00:1b:21:12:fd:22
inet6 fe80::21b:21ff:fe12:fd22%em1 prefixlen 64 scopeid 0x3
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
pflog0: flags=100 <promisc>metric 0 mtu 33172
pfsync0: flags=0<> metric 0 mtu 1500
syncpeer: 224.0.0.240 maxupd: 128 defer: on
syncok: 1
lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
options=600003 <rxcsum,txcsum,rxcsum_ipv6,txcsum_ipv6>inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
nd6 options=21 <performnud,auto_linklocal>enc0: flags=41 <up,running>metric 0 mtu 1536
nd6 options=21 <performnud,auto_linklocal>ue0: flags=8802 <broadcast,simplex,multicast>metric 0 mtu 1500
ether 00:e0:4c:53:44:58
nd6 options=21 <performnud,auto_linklocal>ue1: flags=8802 <broadcast,simplex,multicast>metric 0 mtu 1500
ether 00:e0:4c:53:44:58
nd6 options=21 <performnud,auto_linklocal>ath0_wlan1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
ether 00:22:69:8f:14:a7
inet6 fe80::222:69ff:fe8f:14a7%ath0_wlan1 prefixlen 64 scopeid 0xa
inet 192.168.11.1 netmask 0xffffff00 broadcast 192.168.11.255
nd6 options=21 <performnud,auto_linklocal>media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>status: running
ssid "Clone 1" channel 1 (2412 MHz 11g ht/40+) bssid 00:22:69:8f:14:a7
regdomain FCC country US outdoor ecm authmode WPA2/802.11i
privacy MIXED deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit
txpower 30 scanvalid 60 protmode OFF ampdulimit 64k ampdudensity 8
shortgi wme burst -apbridge dtimperiod 1 -dfs
ath0_wlan2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
ether 06:22:69:8f:14:a7
inet6 fe80::422:69ff:fe8f:14a7%ath0_wlan2 prefixlen 64 scopeid 0xb
inet 192.168.12.1 netmask 0xffffff00 broadcast 192.168.12.255
nd6 options=21 <performnud,auto_linklocal>media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>status: running
ssid "Clone 2" channel 1 (2412 MHz 11g ht/40+) bssid 06:22:69:8f:14:a7
regdomain FCC country US outdoor ecm authmode WPA2/802.11i
privacy MIXED deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit
txpower 30 scanvalid 60 protmode OFF ampdulimit 64k ampdudensity 8
shortgi wme burst -apbridge dtimperiod 1 -dfs
ath0_wlan3: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
ether 0a:22:69:8f:14:a7
inet6 fe80::822:69ff:fe8f:14a7%ath0_wlan3 prefixlen 64 scopeid 0xc
inet 192.168.13.1 netmask 0xffffff00 broadcast 192.168.13.255
nd6 options=21 <performnud,auto_linklocal>media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>status: running
ssid "Clone 3" channel 1 (2412 MHz 11g ht/40+) bssid 0a:22:69:8f:14:a7
regdomain FCC country US outdoor ecm authmode OPEN privacy OFF
txpower 30 scanvalid 60 protmode OFF ampdulimit 64k ampdudensity 8
shortgi wme burst -apbridge dtimperiod 1 -dfs
ath0_wlan4: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
ether 0e:22:69:8f:14:a7
inet6 fe80::c22:69ff:fe8f:14a7%ath0_wlan4 prefixlen 64 scopeid 0xd
inet 192.168.14.1 netmask 0xffffff00 broadcast 192.168.14.255
nd6 options=21 <performnud,auto_linklocal>media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>status: running
ssid "Clone 4" channel 1 (2412 MHz 11g ht/40+) bssid 0e:22:69:8f:14:a7
regdomain FCC country US outdoor ecm authmode WPA2/802.11i
privacy MIXED deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit
txpower 30 scanvalid 60 protmode OFF ampdulimit 64k ampdudensity 8
shortgi wme burst -apbridge dtimperiod 1 -dfs
em0_vlan60: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
options=103 <rxcsum,txcsum,tso4>ether 00:10:f3:1b:1f:79
inet6 fe80::210:f3ff:fe1b:1f70%em0_vlan60 prefixlen 64 scopeid 0xe
inet 192.168.60.1 netmask 0xffffff00 broadcast 192.168.60.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 60 vlanpcp: 0 parent interface: em0
pppoe1: flags=89d1 <up,pointopoint,running,noarp,promisc,simplex,multicast>metric 0 mtu 1492
netmask 0xffffffff
inet6 fe80::210:f3ff:fe1b:1f70%pppoe1 prefixlen 64 scopeid 0xf
nd6 options=21 <performnud,auto_linklocal>ovpns1: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
options=80000 <linkstate>inet6 fe80::210:f3ff:fe1b:1f70%ovpns1 prefixlen 64 scopeid 0x10
inet 192.168.99.1 –> 192.168.99.2 netmask 0xffffffff
nd6 options=21 <performnud,auto_linklocal>Opened by PID 25301
[2.2.6-RELEASE][admin@sed2.local]/root:How about you post it so we can see what you've really done.
does it even supports vlan ?
True. Is it enabled and assigned an IP address, etc?
And, looking closer, there should not be an em0_vlan1 interface. Untagged (default VLAN 1) traffic would simply be on em0, not em0_vlan1.
True. Is it enabled and assigned an IP address, etc?
And, looking closer, there should not be an em0_vlan1 interface. Untagged (default VLAN 1) traffic would simply be on em0, not em0_vlan1.
em1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
options=209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic>em0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
options=5219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso>ether 00:10:f3:1b:1f:70
inet6 fe80::210:f3ff:fe1b:1f70%em0 prefixlen 64 scopeid 0x1
inet 192.168.4.10 netmask 0xffffff00 broadcast 192.168.4.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
em0_vlan1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
options=103 <rxcsum,txcsum,tso4>ether 00:10:f3:1b:1f:70
inet6 fe80::210:f3ff:fe1b:1f70%em0_vlan1 prefixlen 64 scopeid 0x11
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 1 vlanpcp: 0 parent interface: em0</full-duplex></performnud,auto_linklocal></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,simplex,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic></up,broadcast,running,simplex,multicast>VLAN_HWTAGGING
Definitely supported. However, I don't see the em0_vlan60 interface. Would be tough to connect on that interface if it didn't exist, no?
No luck with above configuration.
Will check by inserting a cisco 3550 switch tommorrow.</performnud,auto_linklocal></linkstate></up,pointopoint,running,multicast></performnud,auto_linklocal></up,pointopoint,running,noarp,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></hostap></performnud,auto_linklocal></up,broadcast,running,simplex,multicast></hostap></performnud,auto_linklocal></up,broadcast,running,simplex,multicast></hostap></performnud,auto_linklocal></up,broadcast,running,simplex,multicast></hostap></performnud,auto_linklocal></up,broadcast,running,simplex,multicast></performnud,auto_linklocal></broadcast,simplex,multicast></performnud,auto_linklocal></broadcast,simplex,multicast></performnud,auto_linklocal></up,running></performnud,auto_linklocal></rxcsum,txcsum,rxcsum_ipv6,txcsum_ipv6></up,loopback,running,multicast></promisc></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic></up,broadcast,running,simplex,multicast></hostap></performnud,auto_linklocal></up,broadcast,running,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,simplex,multicast>
-
Interface is enabled
Dhcp scope is configured and enabled
allow any to any using any protocol rule enabled
Only vlan 60 exists. In vlan tab.
Added to interfaces list.
Still no luck. Can't get ip on that interface neither can communicate using manual ip assignment -
That all looks better.
Make a trunk port with allowed vlan 60 and patch it to em0
Make an access port on vlan 60 and plug in any laptop set to DHCP.
Wait for spanning-tree to do its thing and you should be on 192.168.60.0/24
-
That all looks better.
Make a trunk port with allowed vlan 60 and patch it to em0
Make an access port on vlan 60 and plug in any laptop set to DHCP.
Wait for spanning-tree to do its thing and you should be on 192.168.60.0/24
i did a reboot and now its working when directly connected to lan port..
but it doesnt works when an ap is inserted in between pfsense and server.
the ap is tplink wifirouter (tl-wr740n) using ddwrt in ap mode . (wan port disabled. routing disabled. dhcp relaying enabled )..it seems that it doesnt supports vlans as its atheros based chip in this ap.
however my issue is resolved.
tried with cisco 3550 was able to trunk pfsense lan to cisco port 1 and another trunk from cisco port 7 to server.
-
Good to hear.
What did you reboot?
I add and remove VLANs all the time on 2.1.5 and 2.2.6 I never have to reboot pfSense to make it work.
If it works on two tagged ports it should work directly connected, as long as you don't need a crossover cable (or use a crossover cable).
-
Good to hear.
What did you reboot?
I add and remove VLANs all the time on 2.1.5 and 2.2.6 I never have to reboot pfSense to make it work.
If it works on two tagged ports it should work directly connected, as long as you don't need a crossover cable (or use a crossover cable).
I rebooted pfsense.
And magically both vlan interfaces on my pc obtained ip.
Now it's doing vlaning properly. -
but it doesnt works when an ap is inserted in between pfsense and server.
the ap is tplink wifirouter (tl-wr740n) using ddwrt in ap mode . (wan port disabled. routing disabled. dhcp relaying enabled )..It should work fine if you connect the AP to a port on your switch that is properly configured for the vlan that you wish the wireless clients to be in.
-
I think he's saying he's trying to use the AP as a switch. You would have to make the switch ports tagged ports on the AP for that to work.
