NAT issues port fowarding
-
I recently dove into pfsense and after installing 2.0.3 and realizing that it did not support my nic drivers I moved over to 2.1.
Everything has been perfect up until I'm having issues with port forwarding. I can not get anything to forward to my internal network. Below is my current setup.
MODEM (DHCP) –--> WAN NIC (PFSENSE) -----> LAN NIC (PFSENSE) -----> SWITCH -----> PCs
http://imgur.com/a/XXefv
I can connect straight to it if I get rid of PFSENSE from the same box.
Here are some packet snaps that I have done as well.
On the LAN interface. (it's timing out connecting to my ip)
00:41:45.249897 IP 192.168.1.100.49293 > XXXXXXXXXX.25565: tcp 0
00:41:48.249879 IP 192.168.1.100.49293 > XXXXXXXXXX.25565: tcp 0Connecting in with the above rules on the WAN interface shows nothing.
Port Test Results:
Connection to 192.168.1.103 25565 port [tcp/*] succeeded! -
You're trying to access your server from within your own LAN, judging by the 192.168.1.100 connection to your server @ 192.168.1.103.
In the GUI, go to System/Advanced/Firewall-NAT/
and enable NAT Reflection mode for port forwards.
-
I can not get anything to forward to my internal network. Below is my current setup.
It is often necessary to reset firewall states after "major" rule changes. See Diagnostics -> States, click on Reset States tab, read and click on Reset button.