PFsense was down or restart

cmb

And still no crash report? It's extremely unlikely you would encounter a software problem causing a spontaneous reboot without getting a kernel panic, which would generate a crash report on a full install.

Zflash76

Had the same thing. For me it was my Power supply sometimes dropping below 11.3v and then it hang or it rebooted.

yon

@cmb:

And still no crash report? It's extremely unlikely you would encounter a software problem causing a spontaneous reboot without getting a kernel panic, which would generate a crash report on a full install.

yes, no crash report. Could you add a hardware monitoring function?

yon

@Zflash76:

Had the same thing. For me it was my Power supply sometimes dropping below 11.3v and then it hang or it rebooted.

How I check power supply ?

Zflash76

2 methodes:

Boot it with an desktop OS and use a load generator. Use MB tools that measure all the voltages
Multimeter on the 12v and the 5v rails.

yon

@Zflash76:

2 methodes:

Boot it with an desktop OS and use a load generator. Use MB tools that measure all the voltages

Multimeter on the 12v and the 5v rails.

when PF system dead, MB debug light show " 25". I don't know what it is mean?

Have you MB tools in PF？

Zflash76

MB= Motherboard. Most manufacturers have tools that can monitor the mainboard. Usually these tools are for windows, so boot it from an BartPE disc or e.g.

Otherwise, just try another power supply. It's an easy swap to test it.

jimp

^ That.

Hardware tools are hardware-specific. There is no way we can include such utilities for all hardware. Use a bootable diagnostics ISO from the manufacturer or an open source one, it may have some tests you can try.

Any codes shown like that are typically BIOS-specific or board-specific, so check your MB manual for that.

yon

@jimp:

^ That.

Hardware tools are hardware-specific. There is no way we can include such utilities for all hardware. Use a bootable diagnostics ISO from the manufacturer or an open source one, it may have some tests you can try.

Any codes shown like that are typically BIOS-specific or board-specific, so check your MB manual for that.

I find chinese taiwan version MB AB9 manual.

I am using ABIT AB9 Pro LGA 775 Intel P965 Express ATX Intel Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813127004

debug 25 is:

Early PCI Initial actions:

Include a PCI bus number.
Assign memory and I / O resources.
Search Effective VGA device and VGA BIOS, and put that into C000: 0.

早期PCI起始動作：
-列舉出PCI匯流排號碼。
-指派記憶體及I/O資源。
-蒐尋有效的VGA裝置及VGA BIOS，並將它放入C000:0。

I don't know what it is mean?

I am using USB+TF card with pfSense-memstick-2.3-BETA-amd64, it is full install ?

I find english version

http://www.pcstats.com/articleview.cfm?articleid=2101&page=3

Zflash76

What have you tried so far? Did you use any of the tips we gave you?