Installation problem / Hardware error - PowerEdge R210 II
-
Hello,
For at least 2 years I've been running PFSense on a Dell PowerEdge R210 II. Never had a hardware problem. (Was using 2.2.5 when the problem occured)
Last week, out of nowhere (it seemed, since I was on vacation) pfsense stop reconizing my interfaces, all 4 interfaces. According to the guy who replaced me, he didn't change nothing, the only unsual thing was a blackout during the night, wicth the no break couldn't handle. Not sure if that was the reason.
The problem is that we tryed several things wicth no success. I decided to make a clean install. The problem was, the system doesn't finish booting with the CD. It presents a "HARDWARE ERROR" (See screen in the attachments). I thought it could be a NIC problem, but we installed Windows, and everything went ok, every port was working fine.
So, can anyone help me find a solution for my problem?
PS.: I'm not a native english speaker, so I'm sorry for any possible mistakes.
-
Your photo seems to indicate a SCSI drive failure, or possibly an issue with the SCSI controller. For my own part, I've avoided using Dell hardware with PFS as I had some nasty issues with Dells after upgrades. My personal feeling would be to use fresh hardware, but someone came up with a 'workaround' of sorts here:
https://forum.pfsense.org/index.php?topic=31907.0