Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Issue with Pfsense 2.2.6 under HP dl360 G8

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    5 Posts 2 Posters 1.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      tbaror
      last edited by

      Hello,

      I have issue with Pfsense 2.2.6 under HP dl360 G8 , i have succeeded install it but suddenly i get following below panic after rebooting.
      The only thing i changed is to activated the ILO to be able remote configure
      Please advice
      Thanks

      snip_20160307234520.png
      snip_20160307234520.png_thumb

      1 Reply Last reply Reply Quote 0
      • M
        muswellhillbilly
        last edited by

        Obvious question: Have you tried disabling the ILO to see if it start correctly?

        1 Reply Last reply Reply Quote 0
        • T
          tbaror
          last edited by

          @muswellhillbilly:

          Obvious question: Have you tried disabling the ILO to see if it start correctly?

          yes i did , gives the same
          thx

          1 Reply Last reply Reply Quote 0
          • M
            muswellhillbilly
            last edited by

            @tbaror:

            i have succeeded install it but suddenly i get following below panic after rebooting.
            The only thing i changed is to activated the ILO to be able remote configure

            So did the device start correctly initially but then didn't when you activated ILO, or did it never start correctly? If it only started giving you problems after you installed PFS and then enabled ILO, then I would disable it and re-install. You can test this first by running PFS live from the CD before installing.

            1 Reply Last reply Reply Quote 0
            • T
              tbaror
              last edited by

              @muswellhillbilly:

              @tbaror:

              i have succeeded install it but suddenly i get following below panic after rebooting.
              The only thing i changed is to activated the ILO to be able remote configure

              So did the device start correctly initially but then didn't when you activated ILO, or did it never start correctly? If it only started giving you problems after you installed PFS and then enabled ILO, then I would disable it and re-install. You can test this first by running PFS live from the CD before installing.

              Hi

              Issues solved , the source where sourcing  from ILO , firmware where version 2.10 upgraded to 2.30
              Solved the issue
              Thanks All

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.