Lightsquid service not starting at boot time
-
Nothing changed at all in any area close to that which I'm aware of.
Maybe you added or removed some other package which is causing the boot process to change somehow?
I may split this issue off into its own thread since it seems to be taking over and the cause isn't clear.
-
No, I changed nothing just pushed a snapshot or 2.
Now my /usr/local/etc/rc.d/lighttpd_ls.sh looks like:
#!/bin/sh # This file was automatically generated # by the pfSense service handler. rc_start() { # Start Lightsquid lighttpd webserver mkdir -p /var/etc/lightsquid/ if [ -f /var/etc/lightsquid/lighttpd_ls.conf ]; then /usr/local/sbin/lighttpd_ls -f /var/etc/lightsquid/lighttpd_ls.conf fi } rc_stop() { # Terminate lightsquid Lighttpd webserver, if found. pidnum="$(/bin/pgrep lighttpd_ls)" if [ ! -z "${pidnum}" ]; then /usr/bin/killall lighttpd_ls fi } case $1 in start) rc_start ;; stop) rc_stop ;; restart) rc_stop rc_start ;; esacIt is still not started after reboot.
-
Possible that something is preventing pkg_edit.php?xml=lightsquid.xml when you click on Save to apply correct permissions or something?
Forgot to mention… This happens on both of my pfsenses...
-
If the pkg_edit page was failing to apply then it would work at bootup but not the other way around.
It's acting as though it's not performing the boot-time sync for you that it's doing for me. When it boots up I have /var/etc/lightsquid with the config inside and it's running.
-
So the cfg should be removed on every reboot?
-
It should be irrelevant - the boot-time sync of packages should trigger a rewrite of the config and restart of the daemon. Which appears to be happening OK on my test VMs.
-
well same here on a full install after installing the 11th march snap
-
I noticed that on reboot there is no more starting packages as it used to be. There is definitly something borked as others report it too.
-
The question is how to fix it?
I uninstalled and reinstalled and same thing…I`m out of ideas...
-
If it is relevant…
Working system in a VM:
Mar 12 12:42:10 php-fpm 24560 /rc.start_packages: [squid] Starting a proxy monitor script Mar 12 12:42:09 php-fpm 24560 /rc.start_packages: [squid] Starting service... Mar 12 12:42:08 php-fpm 24560 /rc.start_packages: [squid] Removing freshclam cronjob. Mar 12 12:42:08 php-fpm 24560 /rc.start_packages: [squid] Antivirus features disabled. Mar 12 12:42:08 php-fpm 24560 /rc.start_packages: Checked cron job for /usr/local/pkg/swapstate_check.php, no change needed Mar 12 12:42:08 php-fpm 24560 /rc.start_packages: Checked cron job for /usr/local/sbin/squid -k rotate -f /usr/local/etc/squid/squid.conf, no change needed Mar 12 12:42:08 php-fpm 24560 /rc.start_packages: [squid] Adding cronjobs ... Mar 12 12:42:06 php-fpm 69629 /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running Mar 12 12:42:11 php-fpm 24560 /rc.start_packages: [squid] - squid_resync function call pr: bp:1 rpc:no Mar 12 12:42:11 php-fpm 24560 /rc.start_packages: [lightsquid] Removing old cronjobs... Mar 12 12:42:11 php-fpm 24560 /rc.start_packages: [lightsquid] Successfully created '/usr/local/etc/lightsquid/lightsquid.cfg' configuration file. Mar 12 12:42:11 php-fpm 24560 /rc.start_packages: [lightsquid] Loaded default '/usr/local/etc/lightsquid/lightsquid.cfg.sample' configuration file. Mar 12 12:42:10 php-fpm 24560 /rc.start_packages: Restarting/Starting all packages.Not working system:
Mar 12 12:39:00 php-fpm 94533 /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running Mar 12 12:38:52 php-fpm 71733 /rc.start_packages: [squid] Skipping antivirus services (re)start on boot. Mar 12 12:38:52 php-fpm 71733 /rc.start_packages: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3fff' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3fff fib 0: Network is unreachable' Mar 12 12:38:47 php-fpm 260 /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running Mar 12 12:38:42 php-fpm 71733 /rc.start_packages: [squid] - squid_resync function call pr: bp:1 rpc:no Mar 12 12:38:40 php-fpm 71733 /rc.start_packages: Restarting/Starting all packages. -
And I found probable cause…
If I do: /etc/rc.start_packages after boot everything is OK.
So /etc/rc.start_packages is initiating too fast or maybe even twice and lighttpd never gets started.
-
I am on:
2.3-BETA (amd64)
built on Sat Mar 12 09:32:08 CST 2016
FreeBSD 10.3-RC2This was an upgrade about 1 week ago from 2.2.6
Avahi and Lightsquid do not start automatically at boot.
Here is my system log after bootup.
This might be interesting - Mar 12 19:28:07 php-fpm 59986 /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running
Mar 12 20:10:08 php-fpm 1926 /index.php: Successful login for user 'admin' from: 192.168.1.100 Mar 12 19:28:19 xinetd 20392 Reconfigured: new=0 old=1 dropped=0 (services) Mar 12 19:28:19 xinetd 20392 readjusting service 6969-udp Mar 12 19:28:19 xinetd 20392 Swapping defaults Mar 12 19:28:19 xinetd 20392 Starting reconfiguration Mar 12 19:28:17 php-fpm 535 /rc.start_packages: Checked cron job for /usr/bin/nice -n20 /usr/local/etc/rc.d/squidGuard_logrotate, no change needed Mar 12 19:28:17 check_reload_status Reloading filter Mar 12 19:28:16 php-fpm 535 /rc.start_packages: [squid] Starting a proxy monitor script Mar 12 19:28:16 php-fpm 535 /rc.start_packages: [squid] Starting service... Mar 12 19:28:15 php-fpm 535 /rc.start_packages: [squid] Removing freshclam cronjob. Mar 12 19:28:15 php-fpm 535 /rc.start_packages: [squid] Antivirus features disabled. Mar 12 19:28:15 php-fpm 535 /rc.start_packages: Checked cron job for /usr/local/pkg/swapstate_check.php, no change needed Mar 12 19:28:15 php-fpm 535 /rc.start_packages: Checked cron job for /usr/local/sbin/squid -k rotate -f /usr/local/etc/squid/squid.conf, no change needed Mar 12 19:28:15 php-fpm 535 /rc.start_packages: [squid] Adding cronjobs ... Mar 12 19:28:11 php-fpm 535 /rc.start_packages: [squid] - squid_resync function call pr: bp: rpc:no Mar 12 19:28:10 sshlockout 52592 sshlockout/webConfigurator v3.0 starting up Mar 12 19:28:10 login login on ttyv0 as root Mar 12 19:28:08 php-fpm 59986 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'filter' rules. Mar 12 19:28:08 php-fpm 59986 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'pfearly' rules. Mar 12 19:28:08 xinetd 20392 Reconfigured: new=0 old=1 dropped=0 (services) Mar 12 19:28:08 xinetd 20392 readjusting service 6969-udp Mar 12 19:28:08 xinetd 20392 Swapping defaults Mar 12 19:28:08 xinetd 20392 Starting reconfiguration Mar 12 19:28:08 kernel done. Mar 12 19:28:08 php-fpm 59986 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'nat' rules. Mar 12 19:28:08 kernel done. Mar 12 19:28:07 kernel done. Mar 12 19:28:07 php-fpm 59986 /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running Mar 12 19:28:07 syslogd kernel boot file is /boot/kernel/kernel Mar 12 19:28:07 syslogd exiting on signal 15 Mar 12 19:28:04 kernel done. Mar 12 19:28:04 kernel done. Mar 12 19:28:04 php-cgi rc.bootup: miniupnpd: Starting service on interface: lan Mar 12 19:28:04 php-cgi rc.bootup: Creating rrd update script Mar 12 19:28:00 php-fpm 535 /rc.start_packages: Restarting/Starting all packages. Mar 12 19:28:00 kernel .done. Mar 12 19:28:00 php-fpm 59986 /rc.dyndns.update: phpDynDNS (all.dnsomatic.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Mar 12 19:27:59 kernel .. Mar 12 19:27:59 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'filter' rules. Mar 12 19:27:59 check_reload_status Starting packages Mar 12 19:27:59 php-fpm 535 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> - Restarting packages. Mar 12 19:27:59 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules. Mar 12 19:27:59 xinetd 20392 Reconfigured: new=0 old=1 dropped=0 (services) Mar 12 19:27:59 xinetd 20392 readjusting service 6969-udp Mar 12 19:27:59 kernel . Mar 12 19:27:59 xinetd 20392 Swapping defaults Mar 12 19:27:59 xinetd 20392 Starting reconfiguration Mar 12 19:27:59 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'nat' rules. Mar 12 19:27:59 check_reload_status Updating all dyndns Mar 12 19:27:59 dhcpleases kqueue error: unkown Mar 12 19:27:58 kernel done. Mar 12 19:27:58 php-fpm 16261 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'filter' rules. Mar 12 19:27:58 kernel done. Mar 12 19:27:58 php-fpm 59986 /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: []) (real interface: ovpns1). Mar 12 19:27:58 php-fpm 59986 /rc.newwanip: rc.newwanip: Info: starting on ovpns1. Mar 12 19:27:58 php-fpm 16261 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'pfearly' rules. Mar 12 19:27:58 xinetd 20392 Reconfigured: new=0 old=1 dropped=0 (services) Mar 12 19:27:58 xinetd 20392 readjusting service 6969-udp Mar 12 19:27:58 xinetd 20392 Swapping defaults Mar 12 19:27:58 xinetd 20392 Starting reconfiguration Mar 12 19:27:58 php-fpm 16261 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'nat' rules. Mar 12 19:27:58 php-cgi rc.bootup: ROUTING: setting default route to Mar 12 19:27:57 php-fpm 535 /rc.newwanip: Creating rrd update script Mar 12 19:27:57 check_reload_status rc.newwanip starting ovpns1 Mar 12 19:27:57 kernel ovpns1: link state changed to UP Mar 12 19:27:57 check_reload_status Reloading filter Mar 12 19:27:57 kernel ovpns1: link state changed to DOWN Mar 12 19:27:57 kernel igb1: link state changed to UP Mar 12 19:27:57 check_reload_status Linkup starting igb1 Mar 12 19:27:57 php-fpm 535 /rc.newwanip: Resyncing OpenVPN instances for interface WAN. Mar 12 19:27:57 kernel .done. Mar 12 19:27:56 kernel .. Mar 12 19:27:56 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'filter' rules. Mar 12 19:27:56 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules. Mar 12 19:27:56 xinetd 20392 Reconfigured: new=0 old=1 dropped=0 (services) Mar 12 19:27:56 xinetd 20392 readjusting service 6969-udp Mar 12 19:27:56 xinetd 20392 Swapping defaults Mar 12 19:27:56 xinetd 20392 Starting reconfiguration Mar 12 19:27:56 php-fpm 535 /rc.newwanip: phpDynDNS (all.dnsomatic.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Mar 12 19:27:56 kernel igb3: link state changed to UP Mar 12 19:27:56 check_reload_status Linkup starting igb3 Mar 12 19:27:56 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'nat' rules. Mar 12 19:27:55 check_reload_status Linkup starting igb2 Mar 12 19:27:55 kernel igb2: link state changed to UP Mar 12 19:27:55 php-fpm 535 /rc.newwanip: ROUTING: setting default route to 108.47.60.1 Mar 12 19:27:55 php-fpm 16261 /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: []) (real interface: ovpns1). Mar 12 19:27:55 php-fpm 16261 /rc.newwanip: rc.newwanip: Info: starting on ovpns1. Mar 12 19:27:55 php-fpm 535 /rc.newwanip: [squid] Installed but not started. Not installing 'filter' rules. Mar 12 19:27:55 php-fpm 535 /rc.newwanip: [squid] Installed but not started. Not installing 'pfearly' rules. Mar 12 19:27:55 xinetd 20392 Started working: 1 available service Mar 12 19:27:55 xinetd 20392 xinetd Version 2.3.15 started with libwrap loadavg options compiled in. Mar 12 19:27:54 php-fpm 535 /rc.newwanip: [squid] Installed but not started. Not installing 'nat' rules. Mar 12 19:27:54 check_reload_status rc.newwanip starting ovpns1 Mar 12 19:27:54 kernel ovpns1: link state changed to UP Mar 12 19:27:54 kernel pflog0: promiscuous mode enabled Mar 12 19:27:54 kernel tun1: changing name to 'ovpns1' Mar 12 19:27:54 php-fpm 535 /rc.newwanip: rc.newwanip: on (IP address: ) (interface: WAN[wan]) (real interface: igb0). Mar 12 19:27:54 php-fpm 535 /rc.newwanip: rc.newwanip: Info: starting on igb0. Mar 12 19:27:54 kernel done. Mar 12 19:27:54 php-cgi rc.bootup: Resyncing OpenVPN instances. Mar 12 19:27:54 kernel done. Mar 12 19:27:53 kernel done. Mar 12 19:27:53 check_reload_status rc.newwanip starting igb0 Mar 12 19:27:52 kernel igb0: link state changed to UP Mar 12 19:27:52 check_reload_status Linkup starting igb0 Mar 12 19:27:49 sshlockout 7492 sshlockout/webConfigurator v3.0 starting up Mar 12 19:27:49 sshd 7379 Server listening on 0.0.0.0 port 22. Mar 12 19:27:49 sshd 7379 Server listening on :: port 22. Mar 12 19:27:48 kernel coretemp3: <cpu on-die="" thermal="" sensors="">on cpu3 Mar 12 19:27:48 kernel coretemp2: <cpu on-die="" thermal="" sensors="">on cpu2 Mar 12 19:27:48 kernel coretemp1: <cpu on-die="" thermal="" sensors="">on cpu1 Mar 12 19:27:48 kernel coretemp0: <cpu on-die="" thermal="" sensors="">on cpu0 Mar 12 19:27:48 kernel aesni0: <aes-cbc,aes-xts,aes-gcm,aes-icm>on motherboard Mar 12 19:27:48 kernel padlock0: No ACE support. Mar 12 19:27:48 kernel Trying to mount root from ufs:/dev/ufsid/56a3029f71f9e4d1 [rw]... Mar 12 19:27:48 kernel kbd2 at ukbd0 Mar 12 19:27:48 kernel ukbd0: <vendor 0="" 4="" 0x0557="" product="" 0x2419,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus1 Mar 12 19:27:48 kernel ugen1.4: <vendor 0x0557="">at usbus1 Mar 12 19:27:48 kernel Root mount waiting for: usbus1 Mar 12 19:27:48 kernel uhub3: 4 ports with 3 removable, self powered Mar 12 19:27:48 kernel uhub3: <vendor 3="" 9="" 0x0557="" product="" 0x7000,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1 Mar 12 19:27:48 kernel ugen1.3: <vendor 0x0557="">at usbus1 Mar 12 19:27:48 kernel Root mount waiting for: usbus1 Mar 12 19:27:48 kernel uhub2: 4 ports with 4 removable, self powered Mar 12 19:27:48 kernel uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x07db,="" class="" 0,="" rev="" 2.00="" 0.02,="" addr="">on usbus1 Mar 12 19:27:48 kernel ugen1.2: <vendor 0x8087="">at usbus1 Mar 12 19:27:48 kernel Root mount waiting for: usbus1 Mar 12 19:27:48 kernel uhub1: 8 ports with 8 removable, self powered Mar 12 19:27:48 kernel Root mount waiting for: usbus1 Mar 12 19:27:48 kernel Root mount waiting for: usbus1 Mar 12 19:27:48 kernel uhub0: 8 ports with 8 removable, self powered Mar 12 19:27:48 kernel Root mount waiting for: usbus1 usbus0 Mar 12 19:27:48 kernel Timecounter "TSC-low" frequency 1200054168 Hz quality 1000 Mar 12 19:27:48 kernel SMP: AP CPU #2 Launched! Mar 12 19:27:48 kernel SMP: AP CPU #3 Launched! Mar 12 19:27:48 kernel SMP: AP CPU #1 Launched! Mar 12 19:27:48 kernel ada0: Previously was known as ad12 Mar 12 19:27:48 kernel ada0: quirks=0x1<4K> Mar 12 19:27:48 kernel ada0: 114473MB (234441648 512 byte sectors) Mar 12 19:27:48 kernel ada0: Command Queueing enabled Mar 12 19:27:48 kernel ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Mar 12 19:27:48 kernel ada0: Serial Number CVPR139202VB120LGN Mar 12 19:27:48 kernel ada0: <intel ssdsa2cw120g3="" 4pc10362="">ATA8-ACS SATA 2.x device Mar 12 19:27:48 kernel ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 Mar 12 19:27:48 kernel uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1 Mar 12 19:27:48 kernel ugen1.1: <intel>at usbus1 Mar 12 19:27:48 kernel uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Mar 12 19:27:48 kernel ugen0.1: <0x1912> at usbus0 Mar 12 19:27:48 kernel usbus1: 480Mbps High Speed USB v2.0 Mar 12 19:27:48 kernel usbus0: 5.0Gbps Super Speed USB v3.0 Mar 12 19:27:48 kernel random: unblocking device. Mar 12 19:27:48 kernel IPsec: Initialized Security Association Processing. Mar 12 19:27:48 kernel Timecounters tick every 1.000 msec Mar 12 19:27:48 kernel est3: <enhanced speedstep="" frequency="" control="">on cpu3 Mar 12 19:27:48 kernel est2: <enhanced speedstep="" frequency="" control="">on cpu2 Mar 12 19:27:48 kernel est1: <enhanced speedstep="" frequency="" control="">on cpu1 Mar 12 19:27:48 kernel est0: <enhanced speedstep="" frequency="" control="">on cpu0 Mar 12 19:27:48 kernel ppc0: cannot reserve I/O port range Mar 12 19:27:48 kernel atkbd0: [GIANT-LOCKED] Mar 12 19:27:48 kernel kbd0 at atkbd0 Mar 12 19:27:48 kernel atkbd0: <at keyboard="">irq 1 on atkbdc0 Mar 12 19:27:48 kernel atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 Mar 12 19:27:48 kernel vga0: <generic isa="" vga="">at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0 Mar 12 19:27:48 kernel sc0: CGA <16 virtual consoles, flags=0x300> Mar 12 19:27:48 kernel sc0: <system console="">at flags 0x100 on isa0 Mar 12 19:27:48 kernel orm0: <isa option="" rom="">at iomem 0xc0000-0xc7fff on isa0 Mar 12 19:27:48 kernel uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Mar 12 19:27:48 kernel uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Mar 12 19:27:48 kernel isa0: <isa bus="">on isab0 Mar 12 19:27:48 kernel isab0: <pci-isa bridge="">at device 31.0 on pci0 Mar 12 19:27:48 kernel ahcich5: <ahci channel="">at channel 1 on ahci1 Mar 12 19:27:48 kernel ahcich4: <ahci channel="">at channel 0 on ahci1 Mar 12 19:27:48 kernel ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported Mar 12 19:27:48 kernel ahci1: <intel avoton="" ahci="" sata="" controller="">port 0xe110-0xe117,0xe100-0xe103,0xe0f0-0xe0f7,0xe0e0-0xe0e3,0xe020-0xe03f mem 0xdf315000-0xdf3157ff irq 19 at device 24.0 on pci0 Mar 12 19:27:48 kernel ahcich3: <ahci channel="">at channel 3 on ahci0 Mar 12 19:27:48 kernel ahcich2: <ahci channel="">at channel 2 on ahci0 Mar 12 19:27:48 kernel ahcich1: <ahci channel="">at channel 1 on ahci0 Mar 12 19:27:48 kernel ahcich0: <ahci channel="">at channel 0 on ahci0 Mar 12 19:27:48 kernel ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported Mar 12 19:27:48 kernel ahci0: <intel avoton="" ahci="" sata="" controller="">port 0xe150-0xe157,0xe140-0xe143,0xe130-0xe137,0xe120-0xe123,0xe040-0xe05f mem 0xdf316000-0xdf3167ff irq 19 at device 23.0 on pci0 Mar 12 19:27:48 kernel usbus1 on ehci0 Mar 12 19:27:48 kernel usbus1: EHCI version 1.0 Mar 12 19:27:48 kernel ehci0: <intel avoton="" usb="" 2.0="" controller="">mem 0xdf317000-0xdf3173ff irq 23 at device 22.0 on pci0 Mar 12 19:27:48 kernel igb3: netmap queues/slots: TX 4/1024, RX 4/1024 Mar 12 19:27:48 kernel igb3: Bound queue 3 to cpu 3 Mar 12 19:27:48 kernel igb3: Bound queue 2 to cpu 2 Mar 12 19:27:48 kernel igb3: Bound queue 1 to cpu 1 Mar 12 19:27:48 kernel igb3: Bound queue 0 to cpu 0 Mar 12 19:27:48 kernel igb3: Ethernet address: 00:25:90:f2:d5:59 Mar 12 19:27:48 kernel igb3: Using MSIX interrupts with 5 vectors Mar 12 19:27:48 kernel igb3: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe060-0xe07f mem 0xdf200000-0xdf21ffff,0xdf300000-0xdf303fff irq 23 at device 20.3 on pci0 Mar 12 19:27:48 kernel igb2: netmap queues/slots: TX 4/1024, RX 4/1024 Mar 12 19:27:48 kernel igb2: Bound queue 3 to cpu 3 Mar 12 19:27:48 kernel igb2: Bound queue 2 to cpu 2 Mar 12 19:27:48 kernel igb2: Bound queue 1 to cpu 1 Mar 12 19:27:48 kernel igb2: Bound queue 0 to cpu 0 Mar 12 19:27:48 kernel igb2: Ethernet address: 00:25:90:f2:d5:58 Mar 12 19:27:48 kernel igb2: Using MSIX interrupts with 5 vectors Mar 12 19:27:48 kernel igb2: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe080-0xe09f mem 0xdf220000-0xdf23ffff,0xdf304000-0xdf307fff irq 22 at device 20.2 on pci0 Mar 12 19:27:48 kernel igb1: netmap queues/slots: TX 4/1024, RX 4/1024 Mar 12 19:27:48 kernel igb1: Bound queue 3 to cpu 3 Mar 12 19:27:48 kernel igb1: Bound queue 2 to cpu 2 Mar 12 19:27:48 kernel igb1: Bound queue 1 to cpu 1 Mar 12 19:27:48 kernel igb1: Bound queue 0 to cpu 0 Mar 12 19:27:48 kernel igb1: Ethernet address: 00:25:90:f2:d5:57 Mar 12 19:27:48 kernel igb1: Using MSIX interrupts with 5 vectors Mar 12 19:27:48 kernel igb1: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe0a0-0xe0bf mem 0xdf240000-0xdf25ffff,0xdf308000-0xdf30bfff irq 21 at device 20.1 on pci0 Mar 12 19:27:48 kernel igb0: netmap queues/slots: TX 4/1024, RX 4/1024 Mar 12 19:27:48 kernel igb0: Bound queue 3 to cpu 3 Mar 12 19:27:48 kernel igb0: Bound queue 2 to cpu 2 Mar 12 19:27:48 kernel igb0: Bound queue 1 to cpu 1 Mar 12 19:27:48 kernel igb0: Bound queue 0 to cpu 0 Mar 12 19:27:48 kernel igb0: Ethernet address: 00:25:90:f2:d5:56 Mar 12 19:27:48 kernel igb0: Using MSIX interrupts with 5 vectors Mar 12 19:27:48 kernel igb0: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe0c0-0xe0df mem 0xdf260000-0xdf27ffff,0xdf30c000-0xdf30ffff irq 20 at device 20.0 on pci0 Mar 12 19:27:48 kernel pci0: <base peripheral,="" iommu=""> at device 15.0 (no driver attached) Mar 12 19:27:48 kernel pci0: <processor>at device 11.0 (no driver attached) Mar 12 19:27:48 kernel pci4: <acpi pci="" bus="">on pcib4 Mar 12 19:27:48 kernel pcib4: <acpi pci-pci="" bridge="">mem 0xdf2a0000-0xdf2bffff irq 20 at device 3.0 on pci0 Mar 12 19:27:48 kernel usbus0 on xhci0 Mar 12 19:27:48 kernel xhci0: 64 bytes context size, 32-bit DMA Mar 12 19:27:48 kernel xhci0: <xhci (generic)="" usb="" 3.0="" controller="">mem 0xdf100000-0xdf101fff irq 17 at device 0.0 on pci3 Mar 12 19:27:48 kernel pci3: <acpi pci="" bus="">on pcib3 Mar 12 19:27:48 kernel pcib3: <acpi pci-pci="" bridge="">mem 0xdf2c0000-0xdf2dffff irq 16 at device 2.0 on pci0 Mar 12 19:27:48 kernel vgapci0: Boot video device Mar 12 19:27:48 kernel vgapci0: <vga-compatible display="">port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 16 at device 0.0 on pci2 Mar 12 19:27:48 kernel pci2: <acpi pci="" bus="">on pcib2 Mar 12 19:27:48 kernel pcib2: <acpi pci-pci="" bridge="">at device 0.0 on pci1 Mar 12 19:27:48 kernel pci1: <acpi pci="" bus="">on pcib1 Mar 12 19:27:48 kernel pcib1: <acpi pci-pci="" bridge="">mem 0xdf2e0000-0xdf2fffff irq 16 at device 1.0 on pci0 Mar 12 19:27:48 kernel pci0: <acpi pci="" bus="">on pcib0 Mar 12 19:27:48 kernel pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 Mar 12 19:27:48 kernel acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 Mar 12 19:27:48 kernel Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 Mar 12 19:27:48 kernel Event timer "i8254" frequency 1193182 Hz quality 100 Mar 12 19:27:48 kernel Timecounter "i8254" frequency 1193182 Hz quality 0 Mar 12 19:27:48 kernel attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Mar 12 19:27:48 kernel Event timer "RTC" frequency 32768 Hz quality 0 Mar 12 19:27:48 kernel atrtc0: Warning: Couldn't map I/O. Mar 12 19:27:48 kernel atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0 Mar 12 19:27:48 kernel Event timer "HPET2" frequency 14318180 Hz quality 440 Mar 12 19:27:48 kernel Event timer "HPET1" frequency 14318180 Hz quality 440 Mar 12 19:27:48 kernel Event timer "HPET" frequency 14318180 Hz quality 450 Mar 12 19:27:48 kernel Timecounter "HPET" frequency 14318180 Hz quality 950 Mar 12 19:27:48 kernel hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0 Mar 12 19:27:48 kernel cpu3: <acpi cpu="">on acpi0 Mar 12 19:27:48 kernel cpu2: <acpi cpu="">on acpi0 Mar 12 19:27:48 kernel cpu1: <acpi cpu="">on acpi0 Mar 12 19:27:48 kernel cpu0: <acpi cpu="">on acpi0 Mar 12 19:27:48 kernel acpi0: Power Button (fixed)</acpi></acpi></acpi></acpi></high></at></at></acpi></acpi></acpi></acpi></acpi></acpi></vga-compatible></acpi></acpi></xhci></acpi></acpi></processor></intel(r)></intel(r)></intel(r)></intel(r)></intel></intel></ahci></ahci></ahci></ahci></intel></ahci></ahci></pci-isa></isa></isa></system></generic></keyboard></at></enhanced></enhanced></enhanced></enhanced></intel></intel></intel></vendor></vendor></vendor></vendor></vendor></vendor></aes-cbc,aes-xts,aes-gcm,aes-icm></cpu></cpu></cpu></cpu> -
I am not using a ramdisk or nano system.
I am running on a Supermicro C2558 board with 8GB ram and a 120GB Intel SSD
Here is what happens when I hit save in both Avahi and then Lightsquid:
Mar 12 20:19:47 check_reload_status Syncing firewall Mar 12 20:19:46 php-fpm 80705 /pkg_edit.php: [lightsquid] Updating cronjobs... Mar 12 20:19:46 check_reload_status Syncing firewall Mar 12 20:19:45 php-fpm 80705 /pkg_edit.php: [lightsquid] Removing old cronjobs... Mar 12 20:19:45 php-fpm 80705 /pkg_edit.php: [lightsquid] Successfully created '/usr/local/etc/lightsquid/lightsquid.cfg' configuration file. Mar 12 20:19:45 php-fpm 80705 /pkg_edit.php: [lightsquid] Loaded default '/usr/local/etc/lightsquid/lightsquid.cfg.sample' configuration file. Mar 12 20:19:45 check_reload_status Syncing firewall Mar 12 20:19:15 avahi-daemon 34886 Service "pfsense" (/usr/local/etc/avahi/services/sftp-ssh.service) successfully established. Mar 12 20:19:15 avahi-daemon 34886 Service "pfsense" (/usr/local/etc/avahi/services/ssh.service) successfully established. Mar 12 20:19:15 avahi-daemon 34886 Server startup complete. Host name is pfsense.local. Local service cookie is 3393655586. Mar 12 20:19:14 avahi-daemon 34886 Registering HINFO record with values 'AMD64'/'FREEBSD'. Mar 12 20:19:14 avahi-daemon 34886 Registering new address record for 192.168.1.1 on igb1.IPv4. Mar 12 20:19:14 avahi-daemon 34886 Registering new address record for fe80::225:90ff:fef2:d557 on igb1.*. Mar 12 20:19:14 avahi-daemon 34886 Registering new address record for 192.168.3.1 on igb3.IPv4. Mar 12 20:19:14 avahi-daemon 34886 Registering new address record for fe80::225:90ff:fef2:d559 on igb3.*. Mar 12 20:19:14 avahi-daemon 34886 Registering new address record for 192.168.10.1 on ovpns1.IPv4. Mar 12 20:19:14 avahi-daemon 34886 Registering new address record for fe80::225:90ff:fef2:d556 on ovpns1.*. Mar 12 20:19:14 avahi-daemon 34886 Network interface enumeration completed. Mar 12 20:19:14 avahi-daemon 34886 New relevant interface igb1.IPv4 for mDNS. Mar 12 20:19:14 avahi-daemon 34886 Joining mDNS multicast group on interface igb1.IPv4 with address 192.168.1.1. Mar 12 20:19:14 avahi-daemon 34886 New relevant interface igb1.IPv6 for mDNS. Mar 12 20:19:14 avahi-daemon 34886 Joining mDNS multicast group on interface igb1.IPv6 with address fe80::225:90ff:fef2:d557. Mar 12 20:19:14 avahi-daemon 34886 New relevant interface igb3.IPv4 for mDNS. Mar 12 20:19:14 avahi-daemon 34886 Joining mDNS multicast group on interface igb3.IPv4 with address 192.168.3.1. Mar 12 20:19:14 avahi-daemon 34886 New relevant interface igb3.IPv6 for mDNS. Mar 12 20:19:14 avahi-daemon 34886 Joining mDNS multicast group on interface igb3.IPv6 with address fe80::225:90ff:fef2:d559. Mar 12 20:19:14 avahi-daemon 34886 New relevant interface ovpns1.IPv4 for mDNS. Mar 12 20:19:14 avahi-daemon 34886 Joining mDNS multicast group on interface ovpns1.IPv4 with address 192.168.10.1. Mar 12 20:19:14 avahi-daemon 34886 New relevant interface ovpns1.IPv6 for mDNS. Mar 12 20:19:14 avahi-daemon 34886 Joining mDNS multicast group on interface ovpns1.IPv6 with address fe80::225:90ff:fef2:d556. Mar 12 20:19:14 avahi-daemon 34886 Loading service file /usr/local/etc/avahi/services/ssh.service. Mar 12 20:19:14 avahi-daemon 34886 Loading service file /usr/local/etc/avahi/services/sftp-ssh.service. Mar 12 20:19:14 avahi-daemon 34886 WARNING: No NSS support for mDNS detected, consider installing nss-mdns! Mar 12 20:19:14 avahi-daemon 34886 avahi-daemon 0.6.31 starting up. Mar 12 20:19:14 avahi-daemon 34886 Successfully dropped root privileges. Mar 12 20:19:14 avahi-daemon 34886 Found user 'avahi' (UID 558) and group 'avahi' (GID 558). -
I use pppoe with ipv6.
Guys with problems, do you also use pppoe? -
-
I think it`s related to this:
https://github.com/pfsense/pfsense/commit/80d3cf1cdd79517cad7676813641d2e0fe73b445
https://redmine.pfsense.org/issues/5952This is definitly a bug in my opinion.
-
Hi!
I also have:
/rc.start_packages: Skipping STARTing packages process because previous/another instance is already runningAnd a lot of those (I don`t know if it is connected):
Mar 14 21:07:45 php-cgi rc.bootup: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3f00' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3f00 fib 0: Network is unreachable'/rc.filter_configure_sync: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3f00' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3f00 fib 0: Network is unreachable'/rc.start_packages: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3f00' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3f00 fib 0: Network is unreachable'/rc.dyndns.update: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3f00' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3f00 fib 0: Network is unreachable' -
What fixed it was editing /etc/rc.start_packages and changing:
FROM: if (time() - $stat['mtime'] >= 90) { TO: if (time() - $stat['mtime'] >= 5) {So it does only wait 5 seconds and then starts packages.
It`s a dirty hack and will work only until next update or gitsync.I`m still very much interested in resolving this without hacks like this.
-
Sounds like this actually has nothing to do with lightsquid but is instead a general package startup problem. Feel free to open a bug entry on redmine.pfsense.org with what you've found so far. I would not emphasize lightsquid on the redmine report since it happens to other packages as well for some people (e.g. Avahi)
-
Here we go: https://redmine.pfsense.org/issues/6001
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.