Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Lightsquid service not starting at boot time

    Scheduled Pinned Locked Moved 2.3-RC Snapshot Feedback and Issues - ARCHIVED
    38 Posts 4 Posters 12.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      maverick_slo
      last edited by

      Possible that something is preventing pkg_edit.php?xml=lightsquid.xml when you click on Save to apply correct permissions or something?

      Forgot to mention… This happens on both of my pfsenses...

      1 Reply Last reply Reply Quote 0
      • jimpJ
        jimp Rebel Alliance Developer Netgate
        last edited by

        If the pkg_edit page was failing to apply then it would work at bootup but not the other way around.

        It's acting as though it's not performing the boot-time sync for you that it's doing for me. When it boots up I have /var/etc/lightsquid with the config inside and it's running.

        Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

        Need help fast? Netgate Global Support!

        Do not Chat/PM for help!

        1 Reply Last reply Reply Quote 0
        • M
          maverick_slo
          last edited by

          So the cfg should be removed on every reboot?

          1 Reply Last reply Reply Quote 0
          • jimpJ
            jimp Rebel Alliance Developer Netgate
            last edited by

            It should be irrelevant - the boot-time sync of packages should trigger a rewrite of the config and restart of the daemon. Which appears to be happening OK on my test VMs.

            Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

            Need help fast? Netgate Global Support!

            Do not Chat/PM for help!

            1 Reply Last reply Reply Quote 0
            • X
              xbipin
              last edited by

              well same here on a full install after installing the 11th march snap

              1 Reply Last reply Reply Quote 0
              • M
                maverick_slo
                last edited by

                I noticed that on reboot there is no more starting packages as it used to be. There is definitly something borked as others report it too.

                1 Reply Last reply Reply Quote 0
                • M
                  maverick_slo
                  last edited by

                  The question is how to fix it?
                  I uninstalled and reinstalled and same thing…

                  I`m out of ideas...

                  1 Reply Last reply Reply Quote 0
                  • M
                    maverick_slo
                    last edited by

                    If it is relevant…

                    Working system in a VM:

                    Mar 12 12:42:10 	php-fpm 	24560 	/rc.start_packages: [squid] Starting a proxy monitor script
Mar 12 12:42:09 	php-fpm 	24560 	/rc.start_packages: [squid] Starting service...
Mar 12 12:42:08 	php-fpm 	24560 	/rc.start_packages: [squid] Removing freshclam cronjob.
Mar 12 12:42:08 	php-fpm 	24560 	/rc.start_packages: [squid] Antivirus features disabled.
Mar 12 12:42:08 	php-fpm 	24560 	/rc.start_packages: Checked cron job for /usr/local/pkg/swapstate_check.php, no change needed
Mar 12 12:42:08 	php-fpm 	24560 	/rc.start_packages: Checked cron job for /usr/local/sbin/squid -k rotate -f /usr/local/etc/squid/squid.conf, no change needed
Mar 12 12:42:08 	php-fpm 	24560 	/rc.start_packages: [squid] Adding cronjobs ...
Mar 12 12:42:06 	php-fpm 	69629 	/rc.start_packages: Skipping STARTing packages process because previous/another instance is already running
Mar 12 12:42:11 	php-fpm 	24560 	/rc.start_packages: [squid] - squid_resync function call pr: bp:1 rpc:no
Mar 12 12:42:11 	php-fpm 	24560 	/rc.start_packages: [lightsquid] Removing old cronjobs...
Mar 12 12:42:11 	php-fpm 	24560 	/rc.start_packages: [lightsquid] Successfully created '/usr/local/etc/lightsquid/lightsquid.cfg' configuration file.
Mar 12 12:42:11 	php-fpm 	24560 	/rc.start_packages: [lightsquid] Loaded default '/usr/local/etc/lightsquid/lightsquid.cfg.sample' configuration file.
Mar 12 12:42:10 	php-fpm 	24560 	/rc.start_packages: Restarting/Starting all packages.

                    Not working system:

                    
Mar 12 12:39:00 	php-fpm 	94533 	/rc.start_packages: Skipping STARTing packages process because previous/another instance is already running
Mar 12 12:38:52 	php-fpm 	71733 	/rc.start_packages: [squid] Skipping antivirus services (re)start on boot.
Mar 12 12:38:52 	php-fpm 	71733 	/rc.start_packages: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3fff' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3fff fib 0: Network is unreachable'
Mar 12 12:38:47 	php-fpm 	260 	/rc.start_packages: Skipping STARTing packages process because previous/another instance is already running
Mar 12 12:38:42 	php-fpm 	71733 	/rc.start_packages: [squid] - squid_resync function call pr: bp:1 rpc:no
Mar 12 12:38:40 	php-fpm 	71733 	/rc.start_packages: Restarting/Starting all packages.
                    1 Reply Last reply Reply Quote 0
                    • M
                      maverick_slo
                      last edited by

                      And I found probable cause…

                      If I do: /etc/rc.start_packages  after boot everything is OK.

                      So /etc/rc.start_packages is initiating too fast or maybe even twice and lighttpd never gets started.

                      1 Reply Last reply Reply Quote 0
                      • cwagzC
                        cwagz
                        last edited by

                        I am on:

                        2.3-BETA (amd64)
                        built on Sat Mar 12 09:32:08 CST 2016
                        FreeBSD 10.3-RC2

                        This was an upgrade about 1 week ago from 2.2.6

                        Avahi and Lightsquid do not start automatically at boot.

                        Here is my system log after bootup.

                        This might be interesting - Mar 12 19:28:07  php-fpm  59986  /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running

                        Mar 12 20:10:08  php-fpm  1926  /index.php: Successful login for user 'admin' from: 192.168.1.100  
Mar 12 19:28:19  xinetd  20392  Reconfigured: new=0 old=1 dropped=0 (services)  
Mar 12 19:28:19  xinetd  20392  readjusting service 6969-udp  
Mar 12 19:28:19  xinetd  20392  Swapping defaults  
Mar 12 19:28:19  xinetd  20392  Starting reconfiguration  
Mar 12 19:28:17  php-fpm  535  /rc.start_packages: Checked cron job for /usr/bin/nice -n20 /usr/local/etc/rc.d/squidGuard_logrotate, no change needed  
Mar 12 19:28:17  check_reload_status   Reloading filter  
Mar 12 19:28:16  php-fpm  535  /rc.start_packages: [squid] Starting a proxy monitor script  
Mar 12 19:28:16  php-fpm  535  /rc.start_packages: [squid] Starting service...  
Mar 12 19:28:15  php-fpm  535  /rc.start_packages: [squid] Removing freshclam cronjob.  
Mar 12 19:28:15  php-fpm  535  /rc.start_packages: [squid] Antivirus features disabled.  
Mar 12 19:28:15  php-fpm  535  /rc.start_packages: Checked cron job for /usr/local/pkg/swapstate_check.php, no change needed  
Mar 12 19:28:15  php-fpm  535  /rc.start_packages: Checked cron job for /usr/local/sbin/squid -k rotate -f /usr/local/etc/squid/squid.conf, no change needed  
Mar 12 19:28:15  php-fpm  535  /rc.start_packages: [squid] Adding cronjobs ...  
Mar 12 19:28:11  php-fpm  535  /rc.start_packages: [squid] - squid_resync function call pr: bp: rpc:no  
Mar 12 19:28:10  sshlockout  52592  sshlockout/webConfigurator v3.0 starting up  
Mar 12 19:28:10  login   login on ttyv0 as root  
Mar 12 19:28:08  php-fpm  59986  /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'filter' rules.  
Mar 12 19:28:08  php-fpm  59986  /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'pfearly' rules.  
Mar 12 19:28:08  xinetd  20392  Reconfigured: new=0 old=1 dropped=0 (services)  
Mar 12 19:28:08  xinetd  20392  readjusting service 6969-udp  
Mar 12 19:28:08  xinetd  20392  Swapping defaults  
Mar 12 19:28:08  xinetd  20392  Starting reconfiguration  
Mar 12 19:28:08  kernel   done.  
Mar 12 19:28:08  php-fpm  59986  /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'nat' rules.  
Mar 12 19:28:08  kernel   done.  
Mar 12 19:28:07  kernel   done.  
Mar 12 19:28:07  php-fpm  59986  /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running  
Mar 12 19:28:07  syslogd   kernel boot file is /boot/kernel/kernel  
Mar 12 19:28:07  syslogd   exiting on signal 15  
Mar 12 19:28:04  kernel   done.  
Mar 12 19:28:04  kernel   done.  
Mar 12 19:28:04  php-cgi   rc.bootup: miniupnpd: Starting service on interface: lan  
Mar 12 19:28:04  php-cgi   rc.bootup: Creating rrd update script  
Mar 12 19:28:00  php-fpm  535  /rc.start_packages: Restarting/Starting all packages.  
Mar 12 19:28:00  kernel   .done.  
Mar 12 19:28:00  php-fpm  59986  /rc.dyndns.update: phpDynDNS (all.dnsomatic.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.  
Mar 12 19:27:59  kernel   ..  
Mar 12 19:27:59  php-cgi   rc.bootup: [squid] Installed but not started. Not installing 'filter' rules.  
Mar 12 19:27:59  check_reload_status   Starting packages  
Mar 12 19:27:59  php-fpm  535  /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - ->  - Restarting packages.  
Mar 12 19:27:59  php-cgi   rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules.  
Mar 12 19:27:59  xinetd  20392  Reconfigured: new=0 old=1 dropped=0 (services)  
Mar 12 19:27:59  xinetd  20392  readjusting service 6969-udp  
Mar 12 19:27:59  kernel   .  
Mar 12 19:27:59  xinetd  20392  Swapping defaults  
Mar 12 19:27:59  xinetd  20392  Starting reconfiguration  
Mar 12 19:27:59  php-cgi   rc.bootup: [squid] Installed but not started. Not installing 'nat' rules.  
Mar 12 19:27:59  check_reload_status   Updating all dyndns  
Mar 12 19:27:59  dhcpleases   kqueue error: unkown  
Mar 12 19:27:58  kernel   done.  
Mar 12 19:27:58  php-fpm  16261  /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'filter' rules.  
Mar 12 19:27:58  kernel   done.  
Mar 12 19:27:58  php-fpm  59986  /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: []) (real interface: ovpns1).  
Mar 12 19:27:58  php-fpm  59986  /rc.newwanip: rc.newwanip: Info: starting on ovpns1.  
Mar 12 19:27:58  php-fpm  16261  /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'pfearly' rules.  
Mar 12 19:27:58  xinetd  20392  Reconfigured: new=0 old=1 dropped=0 (services)  
Mar 12 19:27:58  xinetd  20392  readjusting service 6969-udp  
Mar 12 19:27:58  xinetd  20392  Swapping defaults  
Mar 12 19:27:58  xinetd  20392  Starting reconfiguration  
Mar 12 19:27:58  php-fpm  16261  /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'nat' rules.  
Mar 12 19:27:58  php-cgi   rc.bootup: ROUTING: setting default route to  
Mar 12 19:27:57  php-fpm  535  /rc.newwanip: Creating rrd update script  
Mar 12 19:27:57  check_reload_status   rc.newwanip starting ovpns1  
Mar 12 19:27:57  kernel   ovpns1: link state changed to UP  
Mar 12 19:27:57  check_reload_status   Reloading filter  
Mar 12 19:27:57  kernel   ovpns1: link state changed to DOWN  
Mar 12 19:27:57  kernel   igb1: link state changed to UP  
Mar 12 19:27:57  check_reload_status   Linkup starting igb1  
Mar 12 19:27:57  php-fpm  535  /rc.newwanip: Resyncing OpenVPN instances for interface WAN.  
Mar 12 19:27:57  kernel   .done.  
Mar 12 19:27:56  kernel   ..  
Mar 12 19:27:56  php-cgi   rc.bootup: [squid] Installed but not started. Not installing 'filter' rules.  
Mar 12 19:27:56  php-cgi   rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules.  
Mar 12 19:27:56  xinetd  20392  Reconfigured: new=0 old=1 dropped=0 (services)  
Mar 12 19:27:56  xinetd  20392  readjusting service 6969-udp  
Mar 12 19:27:56  xinetd  20392  Swapping defaults  
Mar 12 19:27:56  xinetd  20392  Starting reconfiguration  
Mar 12 19:27:56  php-fpm  535  /rc.newwanip: phpDynDNS (all.dnsomatic.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.  
Mar 12 19:27:56  kernel   igb3: link state changed to UP  
Mar 12 19:27:56  check_reload_status   Linkup starting igb3  
Mar 12 19:27:56  php-cgi   rc.bootup: [squid] Installed but not started. Not installing 'nat' rules.  
Mar 12 19:27:55  check_reload_status   Linkup starting igb2  
Mar 12 19:27:55  kernel   igb2: link state changed to UP  
Mar 12 19:27:55  php-fpm  535  /rc.newwanip: ROUTING: setting default route to 108.47.60.1  
Mar 12 19:27:55  php-fpm  16261  /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: []) (real interface: ovpns1).  
Mar 12 19:27:55  php-fpm  16261  /rc.newwanip: rc.newwanip: Info: starting on ovpns1.  
Mar 12 19:27:55  php-fpm  535  /rc.newwanip: [squid] Installed but not started. Not installing 'filter' rules.  
Mar 12 19:27:55  php-fpm  535  /rc.newwanip: [squid] Installed but not started. Not installing 'pfearly' rules.  
Mar 12 19:27:55  xinetd  20392  Started working: 1 available service  
Mar 12 19:27:55  xinetd  20392  xinetd Version 2.3.15 started with libwrap loadavg options compiled in.  
Mar 12 19:27:54  php-fpm  535  /rc.newwanip: [squid] Installed but not started. Not installing 'nat' rules.  
Mar 12 19:27:54  check_reload_status   rc.newwanip starting ovpns1  
Mar 12 19:27:54  kernel   ovpns1: link state changed to UP  
Mar 12 19:27:54  kernel   pflog0: promiscuous mode enabled  
Mar 12 19:27:54  kernel   tun1: changing name to 'ovpns1'  
Mar 12 19:27:54  php-fpm  535  /rc.newwanip: rc.newwanip: on (IP address: ) (interface: WAN[wan]) (real interface: igb0).  
Mar 12 19:27:54  php-fpm  535  /rc.newwanip: rc.newwanip: Info: starting on igb0.  
Mar 12 19:27:54  kernel   done.  
Mar 12 19:27:54  php-cgi   rc.bootup: Resyncing OpenVPN instances.  
Mar 12 19:27:54  kernel   done.  
Mar 12 19:27:53  kernel   done.  
Mar 12 19:27:53  check_reload_status   rc.newwanip starting igb0  
Mar 12 19:27:52  kernel   igb0: link state changed to UP  
Mar 12 19:27:52  check_reload_status   Linkup starting igb0  
Mar 12 19:27:49  sshlockout  7492  sshlockout/webConfigurator v3.0 starting up  
Mar 12 19:27:49  sshd  7379  Server listening on 0.0.0.0 port 22.  
Mar 12 19:27:49  sshd  7379  Server listening on :: port 22.  
Mar 12 19:27:48  kernel   coretemp3: <cpu on-die="" thermal="" sensors="">on cpu3  
Mar 12 19:27:48  kernel   coretemp2: <cpu on-die="" thermal="" sensors="">on cpu2  
Mar 12 19:27:48  kernel   coretemp1: <cpu on-die="" thermal="" sensors="">on cpu1  
Mar 12 19:27:48  kernel   coretemp0: <cpu on-die="" thermal="" sensors="">on cpu0  
Mar 12 19:27:48  kernel   aesni0: <aes-cbc,aes-xts,aes-gcm,aes-icm>on motherboard  
Mar 12 19:27:48  kernel   padlock0: No ACE support.  
Mar 12 19:27:48  kernel   Trying to mount root from ufs:/dev/ufsid/56a3029f71f9e4d1 [rw]...  
Mar 12 19:27:48  kernel   kbd2 at ukbd0  
Mar 12 19:27:48  kernel   ukbd0: <vendor 0="" 4="" 0x0557="" product="" 0x2419,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus1  
Mar 12 19:27:48  kernel   ugen1.4: <vendor 0x0557="">at usbus1  
Mar 12 19:27:48  kernel   Root mount waiting for: usbus1  
Mar 12 19:27:48  kernel   uhub3: 4 ports with 3 removable, self powered  
Mar 12 19:27:48  kernel   uhub3: <vendor 3="" 9="" 0x0557="" product="" 0x7000,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1  
Mar 12 19:27:48  kernel   ugen1.3: <vendor 0x0557="">at usbus1  
Mar 12 19:27:48  kernel   Root mount waiting for: usbus1  
Mar 12 19:27:48  kernel   uhub2: 4 ports with 4 removable, self powered  
Mar 12 19:27:48  kernel   uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x07db,="" class="" 0,="" rev="" 2.00="" 0.02,="" addr="">on usbus1  
Mar 12 19:27:48  kernel   ugen1.2: <vendor 0x8087="">at usbus1  
Mar 12 19:27:48  kernel   Root mount waiting for: usbus1  
Mar 12 19:27:48  kernel   uhub1: 8 ports with 8 removable, self powered  
Mar 12 19:27:48  kernel   Root mount waiting for: usbus1  
Mar 12 19:27:48  kernel   Root mount waiting for: usbus1  
Mar 12 19:27:48  kernel   uhub0: 8 ports with 8 removable, self powered  
Mar 12 19:27:48  kernel   Root mount waiting for: usbus1 usbus0  
Mar 12 19:27:48  kernel   Timecounter "TSC-low" frequency 1200054168 Hz quality 1000  
Mar 12 19:27:48  kernel   SMP: AP CPU #2 Launched!  
Mar 12 19:27:48  kernel   SMP: AP CPU #3 Launched!  
Mar 12 19:27:48  kernel   SMP: AP CPU #1 Launched!  
Mar 12 19:27:48  kernel   ada0: Previously was known as ad12  
Mar 12 19:27:48  kernel   ada0: quirks=0x1<4K>  
Mar 12 19:27:48  kernel   ada0: 114473MB (234441648 512 byte sectors)  
Mar 12 19:27:48  kernel   ada0: Command Queueing enabled  
Mar 12 19:27:48  kernel   ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)  
Mar 12 19:27:48  kernel   ada0: Serial Number CVPR139202VB120LGN  
Mar 12 19:27:48  kernel   ada0: <intel ssdsa2cw120g3="" 4pc10362="">ATA8-ACS SATA 2.x device  
Mar 12 19:27:48  kernel   ada0 at ahcich4 bus 0 scbus4 target 0 lun 0  
Mar 12 19:27:48  kernel   uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1  
Mar 12 19:27:48  kernel   ugen1.1: <intel>at usbus1  
Mar 12 19:27:48  kernel   uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0  
Mar 12 19:27:48  kernel   ugen0.1: <0x1912> at usbus0  
Mar 12 19:27:48  kernel   usbus1: 480Mbps High Speed USB v2.0  
Mar 12 19:27:48  kernel   usbus0: 5.0Gbps Super Speed USB v3.0  
Mar 12 19:27:48  kernel   random: unblocking device.  
Mar 12 19:27:48  kernel   IPsec: Initialized Security Association Processing.  
Mar 12 19:27:48  kernel   Timecounters tick every 1.000 msec  
Mar 12 19:27:48  kernel   est3: <enhanced speedstep="" frequency="" control="">on cpu3  
Mar 12 19:27:48  kernel   est2: <enhanced speedstep="" frequency="" control="">on cpu2  
Mar 12 19:27:48  kernel   est1: <enhanced speedstep="" frequency="" control="">on cpu1  
Mar 12 19:27:48  kernel   est0: <enhanced speedstep="" frequency="" control="">on cpu0  
Mar 12 19:27:48  kernel   ppc0: cannot reserve I/O port range  
Mar 12 19:27:48  kernel   atkbd0: [GIANT-LOCKED]  
Mar 12 19:27:48  kernel   kbd0 at atkbd0  
Mar 12 19:27:48  kernel   atkbd0: <at keyboard="">irq 1 on atkbdc0  
Mar 12 19:27:48  kernel   atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0  
Mar 12 19:27:48  kernel   vga0: <generic isa="" vga="">at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0  
Mar 12 19:27:48  kernel   sc0: CGA <16 virtual consoles, flags=0x300>  
Mar 12 19:27:48  kernel   sc0: <system console="">at flags 0x100 on isa0  
Mar 12 19:27:48  kernel   orm0: <isa option="" rom="">at iomem 0xc0000-0xc7fff on isa0  
Mar 12 19:27:48  kernel   uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0  
Mar 12 19:27:48  kernel   uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0  
Mar 12 19:27:48  kernel   isa0: <isa bus="">on isab0  
Mar 12 19:27:48  kernel   isab0: <pci-isa bridge="">at device 31.0 on pci0  
Mar 12 19:27:48  kernel   ahcich5: <ahci channel="">at channel 1 on ahci1  
Mar 12 19:27:48  kernel   ahcich4: <ahci channel="">at channel 0 on ahci1  
Mar 12 19:27:48  kernel   ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported  
Mar 12 19:27:48  kernel   ahci1: <intel avoton="" ahci="" sata="" controller="">port 0xe110-0xe117,0xe100-0xe103,0xe0f0-0xe0f7,0xe0e0-0xe0e3,0xe020-0xe03f mem 0xdf315000-0xdf3157ff irq 19 at device 24.0 on pci0  
Mar 12 19:27:48  kernel   ahcich3: <ahci channel="">at channel 3 on ahci0  
Mar 12 19:27:48  kernel   ahcich2: <ahci channel="">at channel 2 on ahci0  
Mar 12 19:27:48  kernel   ahcich1: <ahci channel="">at channel 1 on ahci0  
Mar 12 19:27:48  kernel   ahcich0: <ahci channel="">at channel 0 on ahci0  
Mar 12 19:27:48  kernel   ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported  
Mar 12 19:27:48  kernel   ahci0: <intel avoton="" ahci="" sata="" controller="">port 0xe150-0xe157,0xe140-0xe143,0xe130-0xe137,0xe120-0xe123,0xe040-0xe05f mem 0xdf316000-0xdf3167ff irq 19 at device 23.0 on pci0  
Mar 12 19:27:48  kernel   usbus1 on ehci0  
Mar 12 19:27:48  kernel   usbus1: EHCI version 1.0  
Mar 12 19:27:48  kernel   ehci0: <intel avoton="" usb="" 2.0="" controller="">mem 0xdf317000-0xdf3173ff irq 23 at device 22.0 on pci0  
Mar 12 19:27:48  kernel   igb3: netmap queues/slots: TX 4/1024, RX 4/1024  
Mar 12 19:27:48  kernel   igb3: Bound queue 3 to cpu 3  
Mar 12 19:27:48  kernel   igb3: Bound queue 2 to cpu 2  
Mar 12 19:27:48  kernel   igb3: Bound queue 1 to cpu 1  
Mar 12 19:27:48  kernel   igb3: Bound queue 0 to cpu 0  
Mar 12 19:27:48  kernel   igb3: Ethernet address: 00:25:90:f2:d5:59  
Mar 12 19:27:48  kernel   igb3: Using MSIX interrupts with 5 vectors  
Mar 12 19:27:48  kernel   igb3: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe060-0xe07f mem 0xdf200000-0xdf21ffff,0xdf300000-0xdf303fff irq 23 at device 20.3 on pci0  
Mar 12 19:27:48  kernel   igb2: netmap queues/slots: TX 4/1024, RX 4/1024  
Mar 12 19:27:48  kernel   igb2: Bound queue 3 to cpu 3  
Mar 12 19:27:48  kernel   igb2: Bound queue 2 to cpu 2  
Mar 12 19:27:48  kernel   igb2: Bound queue 1 to cpu 1  
Mar 12 19:27:48  kernel   igb2: Bound queue 0 to cpu 0  
Mar 12 19:27:48  kernel   igb2: Ethernet address: 00:25:90:f2:d5:58  
Mar 12 19:27:48  kernel   igb2: Using MSIX interrupts with 5 vectors  
Mar 12 19:27:48  kernel   igb2: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe080-0xe09f mem 0xdf220000-0xdf23ffff,0xdf304000-0xdf307fff irq 22 at device 20.2 on pci0  
Mar 12 19:27:48  kernel   igb1: netmap queues/slots: TX 4/1024, RX 4/1024  
Mar 12 19:27:48  kernel   igb1: Bound queue 3 to cpu 3  
Mar 12 19:27:48  kernel   igb1: Bound queue 2 to cpu 2  
Mar 12 19:27:48  kernel   igb1: Bound queue 1 to cpu 1  
Mar 12 19:27:48  kernel   igb1: Bound queue 0 to cpu 0  
Mar 12 19:27:48  kernel   igb1: Ethernet address: 00:25:90:f2:d5:57  
Mar 12 19:27:48  kernel   igb1: Using MSIX interrupts with 5 vectors  
Mar 12 19:27:48  kernel   igb1: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe0a0-0xe0bf mem 0xdf240000-0xdf25ffff,0xdf308000-0xdf30bfff irq 21 at device 20.1 on pci0  
Mar 12 19:27:48  kernel   igb0: netmap queues/slots: TX 4/1024, RX 4/1024  
Mar 12 19:27:48  kernel   igb0: Bound queue 3 to cpu 3  
Mar 12 19:27:48  kernel   igb0: Bound queue 2 to cpu 2  
Mar 12 19:27:48  kernel   igb0: Bound queue 1 to cpu 1  
Mar 12 19:27:48  kernel   igb0: Bound queue 0 to cpu 0  
Mar 12 19:27:48  kernel   igb0: Ethernet address: 00:25:90:f2:d5:56  
Mar 12 19:27:48  kernel   igb0: Using MSIX interrupts with 5 vectors  
Mar 12 19:27:48  kernel   igb0: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe0c0-0xe0df mem 0xdf260000-0xdf27ffff,0xdf30c000-0xdf30ffff irq 20 at device 20.0 on pci0  
Mar 12 19:27:48  kernel   pci0: <base peripheral,="" iommu=""> at device 15.0 (no driver attached)  
Mar 12 19:27:48  kernel   pci0: <processor>at device 11.0 (no driver attached)  
Mar 12 19:27:48  kernel   pci4: <acpi pci="" bus="">on pcib4  
Mar 12 19:27:48  kernel   pcib4: <acpi pci-pci="" bridge="">mem 0xdf2a0000-0xdf2bffff irq 20 at device 3.0 on pci0  
Mar 12 19:27:48  kernel   usbus0 on xhci0  
Mar 12 19:27:48  kernel   xhci0: 64 bytes context size, 32-bit DMA  
Mar 12 19:27:48  kernel   xhci0: <xhci (generic)="" usb="" 3.0="" controller="">mem 0xdf100000-0xdf101fff irq 17 at device 0.0 on pci3  
Mar 12 19:27:48  kernel   pci3: <acpi pci="" bus="">on pcib3  
Mar 12 19:27:48  kernel   pcib3: <acpi pci-pci="" bridge="">mem 0xdf2c0000-0xdf2dffff irq 16 at device 2.0 on pci0  
Mar 12 19:27:48  kernel   vgapci0: Boot video device  
Mar 12 19:27:48  kernel   vgapci0: <vga-compatible display="">port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 16 at device 0.0 on pci2  
Mar 12 19:27:48  kernel   pci2: <acpi pci="" bus="">on pcib2  
Mar 12 19:27:48  kernel   pcib2: <acpi pci-pci="" bridge="">at device 0.0 on pci1  
Mar 12 19:27:48  kernel   pci1: <acpi pci="" bus="">on pcib1  
Mar 12 19:27:48  kernel   pcib1: <acpi pci-pci="" bridge="">mem 0xdf2e0000-0xdf2fffff irq 16 at device 1.0 on pci0  
Mar 12 19:27:48  kernel   pci0: <acpi pci="" bus="">on pcib0  
Mar 12 19:27:48  kernel   pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0  
Mar 12 19:27:48  kernel   acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0  
Mar 12 19:27:48  kernel   Timecounter "ACPI-safe" frequency 3579545 Hz quality 850  
Mar 12 19:27:48  kernel   Event timer "i8254" frequency 1193182 Hz quality 100  
Mar 12 19:27:48  kernel   Timecounter "i8254" frequency 1193182 Hz quality 0  
Mar 12 19:27:48  kernel   attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0  
Mar 12 19:27:48  kernel   Event timer "RTC" frequency 32768 Hz quality 0  
Mar 12 19:27:48  kernel   atrtc0: Warning: Couldn't map I/O.  
Mar 12 19:27:48  kernel   atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0  
Mar 12 19:27:48  kernel   Event timer "HPET2" frequency 14318180 Hz quality 440  
Mar 12 19:27:48  kernel   Event timer "HPET1" frequency 14318180 Hz quality 440  
Mar 12 19:27:48  kernel   Event timer "HPET" frequency 14318180 Hz quality 450  
Mar 12 19:27:48  kernel   Timecounter "HPET" frequency 14318180 Hz quality 950  
Mar 12 19:27:48  kernel   hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0  
Mar 12 19:27:48  kernel   cpu3: <acpi cpu="">on acpi0  
Mar 12 19:27:48  kernel   cpu2: <acpi cpu="">on acpi0  
Mar 12 19:27:48  kernel   cpu1: <acpi cpu="">on acpi0  
Mar 12 19:27:48  kernel   cpu0: <acpi cpu="">on acpi0  
Mar 12 19:27:48  kernel   acpi0: Power Button (fixed)</acpi></acpi></acpi></acpi></high></at></at></acpi></acpi></acpi></acpi></acpi></acpi></vga-compatible></acpi></acpi></xhci></acpi></acpi></processor></intel(r)></intel(r)></intel(r)></intel(r)></intel></intel></ahci></ahci></ahci></ahci></intel></ahci></ahci></pci-isa></isa></isa></system></generic></keyboard></at></enhanced></enhanced></enhanced></enhanced></intel></intel></intel></vendor></vendor></vendor></vendor></vendor></vendor></aes-cbc,aes-xts,aes-gcm,aes-icm></cpu></cpu></cpu></cpu>

                        Netgate 6100 MAX

                        1 Reply Last reply Reply Quote 0
                        • cwagzC
                          cwagz
                          last edited by

                          I am not using a ramdisk or nano system.

                          I am running on a Supermicro C2558 board with 8GB ram and a 120GB Intel SSD

                          Here is what happens when I hit save in both Avahi and then Lightsquid:

                          Mar 12 20:19:47  check_reload_status   Syncing firewall  
Mar 12 20:19:46  php-fpm  80705  /pkg_edit.php: [lightsquid] Updating cronjobs...  
Mar 12 20:19:46  check_reload_status   Syncing firewall  
Mar 12 20:19:45  php-fpm  80705  /pkg_edit.php: [lightsquid] Removing old cronjobs...  
Mar 12 20:19:45  php-fpm  80705  /pkg_edit.php: [lightsquid] Successfully created '/usr/local/etc/lightsquid/lightsquid.cfg' configuration file.  
Mar 12 20:19:45  php-fpm  80705  /pkg_edit.php: [lightsquid] Loaded default '/usr/local/etc/lightsquid/lightsquid.cfg.sample' configuration file.  
Mar 12 20:19:45  check_reload_status   Syncing firewall  
Mar 12 20:19:15  avahi-daemon  34886  Service "pfsense" (/usr/local/etc/avahi/services/sftp-ssh.service) successfully established.  
Mar 12 20:19:15  avahi-daemon  34886  Service "pfsense" (/usr/local/etc/avahi/services/ssh.service) successfully established.  
Mar 12 20:19:15  avahi-daemon  34886  Server startup complete. Host name is pfsense.local. Local service cookie is 3393655586.  
Mar 12 20:19:14  avahi-daemon  34886  Registering HINFO record with values 'AMD64'/'FREEBSD'.  
Mar 12 20:19:14  avahi-daemon  34886  Registering new address record for 192.168.1.1 on igb1.IPv4.  
Mar 12 20:19:14  avahi-daemon  34886  Registering new address record for fe80::225:90ff:fef2:d557 on igb1.*.  
Mar 12 20:19:14  avahi-daemon  34886  Registering new address record for 192.168.3.1 on igb3.IPv4.  
Mar 12 20:19:14  avahi-daemon  34886  Registering new address record for fe80::225:90ff:fef2:d559 on igb3.*.  
Mar 12 20:19:14  avahi-daemon  34886  Registering new address record for 192.168.10.1 on ovpns1.IPv4.  
Mar 12 20:19:14  avahi-daemon  34886  Registering new address record for fe80::225:90ff:fef2:d556 on ovpns1.*.  
Mar 12 20:19:14  avahi-daemon  34886  Network interface enumeration completed.  
Mar 12 20:19:14  avahi-daemon  34886  New relevant interface igb1.IPv4 for mDNS.  
Mar 12 20:19:14  avahi-daemon  34886  Joining mDNS multicast group on interface igb1.IPv4 with address 192.168.1.1.  
Mar 12 20:19:14  avahi-daemon  34886  New relevant interface igb1.IPv6 for mDNS.  
Mar 12 20:19:14  avahi-daemon  34886  Joining mDNS multicast group on interface igb1.IPv6 with address fe80::225:90ff:fef2:d557.  
Mar 12 20:19:14  avahi-daemon  34886  New relevant interface igb3.IPv4 for mDNS.  
Mar 12 20:19:14  avahi-daemon  34886  Joining mDNS multicast group on interface igb3.IPv4 with address 192.168.3.1.  
Mar 12 20:19:14  avahi-daemon  34886  New relevant interface igb3.IPv6 for mDNS.  
Mar 12 20:19:14  avahi-daemon  34886  Joining mDNS multicast group on interface igb3.IPv6 with address fe80::225:90ff:fef2:d559.  
Mar 12 20:19:14  avahi-daemon  34886  New relevant interface ovpns1.IPv4 for mDNS.  
Mar 12 20:19:14  avahi-daemon  34886  Joining mDNS multicast group on interface ovpns1.IPv4 with address 192.168.10.1.  
Mar 12 20:19:14  avahi-daemon  34886  New relevant interface ovpns1.IPv6 for mDNS.  
Mar 12 20:19:14  avahi-daemon  34886  Joining mDNS multicast group on interface ovpns1.IPv6 with address fe80::225:90ff:fef2:d556.  
Mar 12 20:19:14  avahi-daemon  34886  Loading service file /usr/local/etc/avahi/services/ssh.service.  
Mar 12 20:19:14  avahi-daemon  34886  Loading service file /usr/local/etc/avahi/services/sftp-ssh.service.  
Mar 12 20:19:14  avahi-daemon  34886  WARNING: No NSS support for mDNS detected, consider installing nss-mdns!  
Mar 12 20:19:14  avahi-daemon  34886  avahi-daemon 0.6.31 starting up.  
Mar 12 20:19:14  avahi-daemon  34886  Successfully dropped root privileges.  
Mar 12 20:19:14  avahi-daemon  34886  Found user 'avahi' (UID 558) and group 'avahi' (GID 558). 

                          Netgate 6100 MAX

                          1 Reply Last reply Reply Quote 0
                          • M
                            maverick_slo
                            last edited by

                            I use pppoe with ipv6.
                            Guys with problems, do you also use pppoe?

                            1 Reply Last reply Reply Quote 0
                            • cwagzC
                              cwagz
                              last edited by

                              @maverick_slo:

                              I use pppoe with ipv6.
                              Guys with problems, do you also use pppoe?

                              I am on DHCP.

                              Netgate 6100 MAX

                              1 Reply Last reply Reply Quote 0
                              • M
                                maverick_slo
                                last edited by

                                I think it`s related to this:
                                https://github.com/pfsense/pfsense/commit/80d3cf1cdd79517cad7676813641d2e0fe73b445
                                https://redmine.pfsense.org/issues/5952

                                This is definitly a bug in my opinion.

                                1 Reply Last reply Reply Quote 0
                                • M
                                  maverick_slo
                                  last edited by

                                  Hi!

                                  I also have:

                                  /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running

                                  And a lot of those (I don`t know if it is connected):

                                  Mar 14 21:07:45 	php-cgi 		rc.bootup: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3f00' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3f00 fib 0: Network is unreachable' 

                                  /rc.filter_configure_sync: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3f00' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3f00 fib 0: Network is unreachable' 

                                  /rc.start_packages: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3f00' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3f00 fib 0: Network is unreachable'

                                  /rc.dyndns.update: The command '/sbin/route change -inet6 default fe80::2c1:64ff:fed8:3f00' returned exit code '1', the output was 'route: writing to routing socket: Network is unreachable route: writing to routing socket: Network is unreachable change net default: gateway fe80::2c1:64ff:fed8:3f00 fib 0: Network is unreachable'
                                  1 Reply Last reply Reply Quote 0
                                  • M
                                    maverick_slo
                                    last edited by

                                    What fixed it was editing /etc/rc.start_packages and changing:

                                    
FROM:
if (time() - $stat['mtime'] >= 90) {

TO:
if (time() - $stat['mtime'] >= 5) {

                                    So it does only wait 5 seconds and then starts packages.
                                    It`s a dirty hack and will work only until next update or gitsync.

                                    I`m still very much interested in resolving this without hacks like this.

                                    1 Reply Last reply Reply Quote 0
                                    • jimpJ
                                      jimp Rebel Alliance Developer Netgate
                                      last edited by

                                      Sounds like this actually has nothing to do with lightsquid but is instead a general package startup problem. Feel free to open a bug entry on redmine.pfsense.org with what you've found so far. I would not emphasize lightsquid on the redmine report since it happens to other packages as well for some people (e.g. Avahi)

                                      Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                                      Need help fast? Netgate Global Support!

                                      Do not Chat/PM for help!

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        maverick_slo
                                        last edited by

                                        Here we go: https://redmine.pfsense.org/issues/6001

                                        1 Reply Last reply Reply Quote 0
                                        • M
                                          maverick_slo
                                          last edited by

                                          I`ve updated https://redmine.pfsense.org/issues/6001#change-25756 with new findings.

                                          Snort takes really long time to start and this interrupts other packages.

                                          Is there a way to alter the package startup order?

                                          1 Reply Last reply Reply Quote 0
                                          • M
                                            maverick_slo
                                            last edited by

                                            OK final post here as this won`t change in near future :)

                                            I found a workaround.

                                            Edit config.xml and move lightsquid to top of packages.
                                            The XML tag is: <package>So lightsquid will start first and snort last in my case.</package>

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.