Public ip selected for local IP
-
Thank you for any assistance.
I have two problems.Trouble one:
the provider has two different subnets on a single physical adapter eth1.my network:
WAN1 eth0 (default GW)
–> 82.113.100.176 / 28 GW 82.113.100.177WAN2 eth1
--> 90.182.100.240 / 29 GW 90.182.100.241
--> 90.182.101.240 / 29 GW 90.182.101.241 (I do not know how to add this range.)LAN eth2
--> 192.168.1.0/24 GW 192.168.1.1if the problem will find a solution. My idea is to use a virtual adapter eth1:0
This, but I can not solve.
Trouble two:
I would like to specify that the computer communicates:
192.168.1.100 out through port eth1 WAN2 and will have a fixed IP 90.182.100.245
192.168.1.101 out through port eth1 WAN2 and will have a fixed IP 90.182.100.246
It is a mail server which have the reverse record for these IPI looked for help in Firewall: NAT: Outbound but no adjustment does not lead to success.
Only if I change the default gateway in the System: Gateways changes to all local IP addresses to WAN2 eth1.Thank you very much for your time and possible solutions.
-
I see that you have two possible solutions.
Use an outside switch and two pfSense interfaces.
One on 90.182.100.240 / 29 GW 90.182.100.241
and one on 90.182.101.240 / 29 GW 90.182.101.241Have your provider remove their gateway interface and route 90.182.101.240 / 29 to your pfSense interface on the other subnet, say 90.182.100.242.
If they did that you could use it as VIPs or as an interface subnet inside or route it somewhere else or do whatever you want.
-
Yes, this option I come real. Create a new interface for pfSense.
Zyxel USG could work with virtual LAN the cards with options gates :(ISP will not cooperate …
even solve the problem of two WAN IP to a specific local IP
-
Yes, this option I come real. Create a new interface for pfSense.
Zyxel USG could work with virtual LAN the cards with options gates :(ISP will not cooperate …
even solve the problem of two WAN IP to a specific local IP
Get a different ISP. One who knows how to properly route traffic.
Or, another option is unless there's some reason to need both subnets, give those back and get a /28.
-
Use an outside switch and two pfSense interfaces.
One on 90.182.100.240 / 29 GW 90.182.100.241
and one on 90.182.101.240 / 29 GW 90.182.101.241I need to add that even this is ugly and really should be two different broadcast domains to two different ISP interfaces. But it will probably work as long as there is not traffic going out and back in the same interface. If there is traffic between the two /29s you will probably have problems.