Internet cuts out after enabling advanced outbound NAT
-
Have an Asterisk box behind pfSense that, despite having the proper NAT port forwards (5060-5069 TCP/UDP, 10000-30000 UDP) and rules (5060-5069, 10000-30000 TCP/UDP) destined for its local IP 192.168.1.20, was not receiving all incoming calls. On the basis of advice I read on this forum and elsewhere I enabled advanced outbound NAT on interface WAN source 192.168.1.20/32 with static port enabled and placed this above the auto created rule for LAN.
Since doing so I have noticed two issues:
1. There are two clients on this same subnet that access the Internet through the WAN. They now suffer an occasional drop in the connection (Internet will pause for 30 seconds or so).
2. Despite doing the above, my firewall log is constantly blocking traffic. Here is a sample log entry where 67.71.125.74 would be my PUBLIC IP:
Time/If/Source/Destination/Proto
Oct 18 23:24:38 NG0 82.201.229.160:15104 67.71.125.74:15399 TCP
Oct 18 23:24:39 NG0 81.183.198.29:4305 67.71.125.74:15399 TCP
Oct 18 23:24:40 NG0 190.80.185.231:60239 67.71.125.74:15399 TCP
Oct 18 23:24:41 NG0 84.107.185.240:3948 67.71.125.74:15399 TCP
Oct 18 23:24:42 NG0 203.221.250.20:2997 67.71.125.74:15399 TCP
Oct 18 23:24:42 NG0 220.233.179.142:60642 67.71.125.74:15399 TCPAny thoughts on what I might be doing wrong here? Thanks in advance.
Scotter