IGMP Proxy bus error (Core dumped)

ffx64

Hi all,

the default packaged igmpproxy service crash : Bus error (core dumped)
on my pfsense 2.2.6 when i setup more than 30 vlan networks interfaces on the same
lagg interface (link aggregation).

i use 4 physical interfaces for the lagg : em0, em1, em2, em3

With only 30 vlan networks interfaces igmpproxy works fine.

But with 31 vlan networks interfaces igmpproxy crash.

I tried to start the service from the commande line :```
/usr/local/sbin/igmpproxy -d4 -c /tmp/igmpproxy.conf


It ends with : Bus error (core dumped)

Is it a igmpproxy limitation or may be a kernel limitation ?

Thanks.

ffx64

jimp

There are a couple known crashes with the version of igmpproxy on 2.2.x and before. I don't recall seeing that specific one, though. If you can, you might give 2.3 a spin and see if it's better, there is a much newer version of igmpproxy there that didn't get patched up a lot like the old one did.

ffx64

Well,

According to this post https://forum.pfsense.org/index.php?topic=93293.0, i installed the latest version:

pkg
pkg update
pkg install igmpproxy

but now, as mentioned in this thread, https://forum.pfsense.org/index.php?topic=93293.msg543938#msg543938 ,the vlans interfaces is not recognized anymore.

The next version of pfsense (2.3)do not seem to be a solution with the newer version of igmpproxy.

Am i wrong ?

Thanks

Chefkoch009

Hi @ all,

same here. After Upgrading to Version 2.3 the igmpproxy wan't start.

[2.3-RELEASE][admin@pfSense.localhost.local]/root: igmpproxy -vv -d /tmp/igmppr                                                                                                             Searching for config file at '/tmp/igmpproxy.conf'
Config: Quick leave mode enabled.
Config: Got a phyint token.
Config: IF: Config for interface lagg0_vlan50.
Config: IF: Got downstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 192.168.50.1/24.
Config: IF: Altnet: Parsed altnet to 192.168.50/24.
Config: IF: Got altnet token 224.0.0.1/4.
Config: IF: Altnet: Parsed altnet to 224/4.
IF name : lagg0_vlan50
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 2
Allowednet ptr : 1017050
Config: Got a phyint token.
Config: IF: Config for interface lagg0_vlan60.
Config: IF: Got downstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 192.168.60.1/24.
Config: IF: Altnet: Parsed altnet to 192.168.60/24.
IF name : lagg0_vlan60
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 2
Allowednet ptr : 1017080
Config: Got a phyint token.
Config: IF: Config for interface re0.
Config: IF: Got disabled token.
IF name : re0
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface lagg0_vlan1.
Config: IF: Got disabled token.
IF name : lagg0_vlan1
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface lagg0_vlan10.
Config: IF: Got disabled token.
IF name : lagg0_vlan10
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface lagg0_vlan20.
Config: IF: Got disabled token.
IF name : lagg0_vlan20
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface lagg0_vlan30.
Config: IF: Got disabled token.
IF name : lagg0_vlan30
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface lagg0_vlan40.
Config: IF: Got disabled token.
IF name : lagg0_vlan40
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
buildIfVc: Interface re0 Addr: 31.17.225.215, Flags: 0xffff8843, Network: 31.17.225/24
buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8
buildIfVc: Interface lagg0_vlan1 Addr: 172.16.1.1, Flags: 0xffff8843, Network: 172.16.1/24
buildIfVc: Interface lagg0_vlan10 Addr: 192.168.10.1, Flags: 0xffff8843, Network: 192.168.10/24
buildIfVc: Interface lagg0_vlan20 Addr: 192.168.20.1, Flags: 0xffff8843, Network: 192.168.20/24
Found config for re0
Found config for lagg0_vlan1
Found config for lagg0_vlan10
Found config for lagg0_vlan20
adding VIF, Ix 0 Fl 0x0 IP 0xd7e1111f re0, Threshold: 1, Ratelimit: 0
        Network for [re0] : 31.17.225/24
adding VIF, Ix 1 Fl 0x0 IP 0x010110ac lagg0_vlan1, Threshold: 1, Ratelimit: 0
        Network for [lagg0_vlan1] : 172.16.1/24
adding VIF, Ix 2 Fl 0x0 IP 0x010aa8c0 lagg0_vlan10, Threshold: 1, Ratelimit: 0
        Network for [lagg0_vlan10] : 192.168.10/24
adding VIF, Ix 3 Fl 0x0 IP 0x0114a8c0 lagg0_vlan20, Threshold: 1, Ratelimit: 0
        Network for [lagg0_vlan20] : 192.168.20/24
There must be at least 2 Vif's where one is upstream.

Is there an other way for multicast routing?

Chefkoch009

I use 7 VLAN's but only the first 3 VLAN's seem to be recognized.


adding VIF, Ix 0 Fl 0x0 IP 0xd7e1111f re0, Threshold: 1, Ratelimit: 0
adding VIF, Ix 1 Fl 0x0 IP 0x010110ac lagg0_vlan1, Threshold: 1, Ratelimit: 0
adding VIF, Ix 2 Fl 0x0 IP 0x010aa8c0 lagg0_vlan10, Threshold: 1, Ratelimit: 0
adding VIF, Ix 3 Fl 0x0 IP 0x0114a8c0 lagg0_vlan20, Threshold: 1, Ratelimit: 0

There must be at least 2 Vif's where one is upstream.

The Networrk with Tag 50(upstream) and 60 (downstream) are not working, but in prev release of pfsense.

Chefkoch009

if i change the upstream and downstream down to the first 3 VLAN's, the igmpproxy starts without any problems.

It seems that in any loop in the igmpproxy package is a problem with counting.

Chefkoch009

But the same igmpproxy worked well on prev. pf sense release. maybe there is a bug in the new pfsense 2.3 GUI?

can anybody confirm that?

TeeConnector

@Chefkoch009:

But the same igmpproxy worked well on prev. pf sense release. maybe there is a bug in the new pfsense 2.3 GUI?

What do you mean by "same igmpproxy"?

AFAIK pfSense 2.3 is based on FreeBSD-10.3 which had some internal changes on the network side and contains a different version igmproxy as was included in 2.2.6.

Chefkoch009

Sorry… I mean the igmpproxy configuration.