IPsec between Cisco ASA port 80 not working.
-
Hi,
I have setup IPsec vpn with Cisco ASA in remote side, tunnel is up and can ping network both side however I noticed that port 80 is not working, did packet capture both side but can't get any http
packet traverse in vpn tunnel. I tried to telnet the remote server with different port like 445 and
I got the packet captured on that port both side. All ports are working both side but not http port.
Any help is appreciated. ThanksI used this config
Phase1
Authentication method: Mutual PSK
Negotiation mode: main
Encryption algorithm: AES 256 bits
Hash algorithm: MD5
DH key group: 2Phase2
Protocol: ESP
Encryprtion algorithms: AES 256 bits
Hash algorithms: MD5
PFS key group: 2 -
Hi, I've the same problem here. I can access port https, smtp, pop3 and ping on remote side but no http (the remote side doesn't see any incoming http packet). I've no specific ipsec rule, everything is allowed. I use port 800 for local Squid proxy. Transparent proxy is checked in Squid configuration.
PF2.0.1
Squid 2.7.9v4.3.3
Squidguard 1.4.4v1.9.3