Pfsense 2.3 and esxi 6 first time install
-
restarted everything and all is now working, thanks everyone for your help and support :-)
-
how is it working.. your screenshot of pfsense only shows a wan interface??
Doesn't pfsense default to 192.168.0/24 on its lan?? Be so long since used default on its lan not sure, I know it defaults to 192.168.0 or 192.168.1/24 on its lan.. But those are so common of a network I always change it.. I currently run 192.168.9/24 on pfsense lan..
-
It seemed to want to default to 192.168.1.1 restarted everything and changed it to 192.168.0.1 to Match my current setup power cycled everything again and it started working
If I changed the lan up range would I have to also change my switches up, esxi management to the different range?
-
does not matter what networks you use - but from your post there is on 1 interface and its wan interface.. What exactly are you doing with pfsense with 1 interface??
-
That's the problem I was having I could not get the wan to show along with the LAN when the wan was working it seemed to remove the lan after several restarts they both seemed to appear and the wan recognised my virgin media connection
-
so you have your wan and lan vswitches on different interfaces right? Your not connecting them into the same vswitch
Not sure what you were doing but you shouldn't have to reboot pfsense.
If you had same network on both sides of pfsense wan/lan its going to have problems
-
they were on seperate vswitches with different cards, really not sure what was going on, but they just seemed to spring into life again, hopefully it stays that way, i couldnt even ping the pfsense web gui, but could ping the esxi management interface
-
well your working now, and you have different networks on your wan than your lan right?
-
yes the wan was set to dhcp so it has picked up the 82.x.x.x range my isp provides does that sound okay?
one other strange issue I am having though is I have set the lan dhcp to hand out ip's between .150 and .254 however it doesn't seem to be obeying this and handed out any? any ideas? Thanks very much
-
post your dhcp settings… If your getting other my guess is you have some other dhcp server. Your dhcp client should be able to tell you what the IP of your dhcp server was..
-
it looks like its pointing to the right place, so not sure why the range isnt being taken into account
