[SOLVED] - PPPoE can't set PPP-Max-Payload value

cmb

What's your "set pppoe max-payload" line have in /var/etc/mpd_wan.conf?

GRM

Cmb, thanks for answer!

My entire /var/etc/mpd_wan.conf is here:

As you can see, two facts:
1 - does not exists a parameter "pppoe max-payload" in this file
2 - the unique line refers to mtu, apparently has the wrong syntax, in the same line containing the "SET auth authname" command


# cat mpd_wan.conf
startup:
        # configure the console
        set console close
        # configure the web server
        set web close

default:
pppoeclient:
        create bundle static wan
        set bundle enable ipv6cp
        set iface name pppoe0
        set iface disable on-demand
        set iface idle 0
        set iface enable tcpmssfix
        set iface up-script /usr/local/sbin/ppp-linkup
        set iface down-script /usr/local/sbin/ppp-linkdown
        set ipcp ranges 0.0.0.0/0 0.0.0.0/0
        set ipcp enable req-pri-dns
        set ipcp enable req-sec-dns
        #log -bund -ccp -chat -iface -ipcp -lcp -link

        create link static wan_link0 pppoe
        set link action bundle wan
        set link disable multilink
        set link keep-alive 10 60
        set link max-redial 0
        set link disable chap pap
        set link accept chap pap eap
        set link disable incoming
        set link mtu 1492       set auth authname "***********"
        set auth password ********
        set pppoe service ""
        set pppoe iface rl0
        open

cmb

@GRM:

2 - the unique line refers to mtu, apparently has the wrong syntax, in the same line containing the "SET auth authname" command

<snip>set link mtu 1492 set auth authname "***********"</snip>

So that is all on one line in the file? Did you make any code changes to the system? That's the only way I see that you could end up without a new line there.

The code that sets "set link mtu" is (in /etc/inc/interfaces.inc):

                        $mpdconf .= <<<eod<br>set link mtu {$mtus[$pid]}

EOD;</eod<br>

and that's the only place that gets set. That new line above EOD; means those two lines aren't concatenated.

GRM

Sorry, I really changed ( and unchange ) the interfaces.inc, trying to fix the mtu in 1500 in that line, and sure to undo the amendment eliminated the line is blank.

Now I fix it and /var/etc/mpd_wan.conf is being generated correctly.

Correction:


                        $mpdconf .= <<<eod<br>set link mtu {$mtus[$pid]}

EOD;</eod<br>

new mpd_wan.conf generated:


set link disable incoming
set link mtu 1492
set auth authname "*******"
set auth password *****

But unfortunately the initial problem remains. Thank you!

May 6 01:14:01 ppp [wan_link0] PPPoE can't set PPP-Max-Payload value: Invalid argument

cmb

Now what does your mpd config look like?

GRM

My new mpd_wan.conf:


startup:
        # configure the console
        set console close
        # configure the web server
        set web close

default:
pppoeclient:
        create bundle static wan
        set bundle enable ipv6cp
        set iface name pppoe0
        set iface disable on-demand
        set iface idle 0
        set iface enable tcpmssfix
        set iface up-script /usr/local/sbin/ppp-linkup
        set iface down-script /usr/local/sbin/ppp-linkdown
        set ipcp ranges 0.0.0.0/0 0.0.0.0/0
        set ipcp enable req-pri-dns
        set ipcp enable req-sec-dns
        #log -bund -ccp -chat -iface -ipcp -lcp -link

        create link static wan_link0 pppoe
        set link action bundle wan
        set link disable multilink
        set link keep-alive 10 60
        set link max-redial 0
        set link disable chap pap
        set link accept chap pap eap
        set link disable incoming
        set link mtu 1492
        set auth authname "*******"
        set auth password ********
        set pppoe service ""
        set pppoe iface rl0
        open

The problem remains.

Thank you cmb.

cmb

What exactly does your PPP log show now? Doesn't seem likely you'd be getting exactly the same log as that's specific to the invalid syntax you had.

GRM

Thanks cmb!

After setting the /etc/interfaces.inc my mpd_wan.conf file was generated correctly, as in the above post, but the log still displays the following (as before):


May 7 21:47:21	ppp		[wan_link0] Link: reconnection attempt 5
May 7 21:47:21	ppp		[wan_link0] PPPoE can't set PPP-Max-Payload value: Invalid argument
May 7 21:47:21	ppp		[wan_link0] Link: DOWN event
May 7 21:47:21	ppp		[wan_link0] LCP: Down event
May 7 21:47:21	ppp		[wan_link0] Link: reconnection attempt 6 in 4 seconds
May 7 21:47:25	ppp		[wan_link0] Link: reconnection attempt 6
May 7 21:47:25	ppp		[wan_link0] PPPoE can't set PPP-Max-Payload value: Invalid argument
May 7 21:47:25	ppp		[wan_link0] Link: DOWN event
May 7 21:47:25	ppp		[wan_link0] LCP: Down event
May 7 21:47:25	ppp		[wan_link0] Link: reconnection attempt 7 in 2 seconds
May 7 21:47:27	ppp		[wan_link0] Link: reconnection attempt 7
May 7 21:47:27	ppp		[wan_link0] PPPoE can't set PPP-Max-Payload value: Invalid argument
May 7 21:47:27	ppp		[wan_link0] Link: DOWN event
May 7 21:47:27	ppp		[wan_link0] LCP: Down event
May 7 21:47:27	ppp		[wan_link0] Link: reconnection attempt 8 in 2 seconds

cmb

Have you rebooted since fixing the config? Maybe mpd still has something from the old config stuck in it. Not sure how you could end up with that log with the correct config.

GRM

Yes! I reboot several times after the fix . Even now immediately before posting this response. Plus, every time something changed in the settings, to effect the changes, I disable and enable WAN1.

GRM

Hi!

After some days trying to solve this issue without success, I decide reinstall pfSense 2.3. And Bingo!!! All works fine and the error message was gone!

Conclusion: none!

Thank you cmb.

cmb

Guessing there was something else still hanging around from the changes you made that was causing an issue. Glad it's working now.