2 WAN - 2 LAN - Portforwarding

GSianos

hmmm…maybe...

why no one answer us?

endy66

So you have exactly the same problem?

GSianos

yes!!!

endy66

Is this really not possible with pfsense?

Greetings

endy66

@GSianos, do you have some news? I am on testing since 3 days, but no luck…

Greetings

GSianos

…me too...
why no one answer us????? :(

endy66

@GSianos:

…me too...
why no one answer us????? :(

I dont know. Look the Problem is, if i use a Gateway Group, then it works without Problems. But i dont want to do this, because i dont want to share one wan Connection for my both LANs.

I cant beleive, that there is no one solution for this Problem!

greetings

I dont know.

You know it, it is based on the gateway groups.

Look the Problem is, if i use a Gateway Group, then it works without Problems.

You see it is based on the gateway groups.

But i dont want to do this, because i dont want to share one wan Connection for my both LANs.

You can realize it by using one or more load balancing methods likes;

service based routing
session based routing
policy based routing

like you want, but for each WAN connection you must create a gateway group! Nothing more, but
also nothing less!

I cant believe, that there is no one solution for this Problem!

There will be a solution, but not in that way you will walk on or in that direction you are thinking.
Its a thinking trap or false you are in! Nothing more.

for the LAN group 1 one or all his clients the gateway from the gateway group WAN1 should be used
and in the LAN group 2 the gateway from the gateway group WAN2 should be used to set as gateway.
Thats all you have to do. But without the both or two gateway groups you will be not able to realize it.
Multi WAN
Gateway Groups

Read the entire and full links carefully word by word and solve your problem out.

GSianos

My problem is, that the version of pfSense i used is 2.3 and i dont know how to do all of that for failover….

skalvaro

Hi, sorry for the late reply (work you know).
I see you made some progress but still have some issues to solve so let's try to do so.

Could you check via Diagnostics>Routes what interface the 'default' route points to. I know that you already mentioned you didn't select default on the Gateways but the system likely has chosen one for you :). My guess is that it is the WAN1 interface that is set as 'default'.

If this is the case you could try following: System>Advanced>Miscellaneous under Load Balancing tick 'Enable default gateway switching'.

This should give following situation:
Normal conditions (all WAN UP):
LAN1->WAN1, LAN2->WAN2 and the firewall itself (dns) -> default=WAN1
Error condition (WAN1 DOWN):
LAN1->No Internet,LAN2->WAN2, firewall (dns) -> WAN2

GSianos

WAN1 & WAN2 has the same GW. My servers is Dedicated and the two Internet that i have is the same. the only different is that they have different WAN IP.

For the switching suggestion, i already check it.

i can not fully understand the other thinks that you wrote…

thanks a lot for your time...