Need help setting up unifi on pfsense box
-
What do you mean nothing listening?? Clearly there is something listening both on tcp4 and 6 on 8080 in you routput.. Are you blind??
If there was nothing listening you would get this
[2.2.3-RELEASE][root@pfSense.local.lan]/root: netstat -an | grep 8080
[2.2.3-RELEASE][root@pfSense.local.lan]/root:Why don't you just do a sockstat and not grep.. And look at it..
So you didn't have a switch? You put the ap on your lan? You could put it on different segment and use layer 3 adoption.
-
What do you mean nothing listening?? Clearly there is something listening both on tcp4 and 6 on 8080 in you routput.. Are you blind??
If there was nothing listening you would get this
[2.2.3-RELEASE][root@pfSense.local.lan]/root: netstat -an | grep 8080
[2.2.3-RELEASE][root@pfSense.local.lan]/root:Why don't you just do a sockstat and not grep.. And look at it..
So you didn't have a switch? You put the ap on your lan? You could put it on different segment and use layer 3 adoption.
I realize that after I posted, what i didn't see is what was running on it since i didn't do a sockstat, i'm not use to all these commands lines i'm just learning as i go along.
No i didn't have a switch my original plan was to use 1 of the spare NIC and configure it for the AP or bridge it , but since that not a great idea. I grab a old router i had there a wireless G and converted it into a switch. so this how it setup now
fios –> pfsense (wan)(lan)( 3 NIC not used)
lan -- switch port 1
switch port 2 -- pc
switch port 3 -- unifi APthe 3rd party software running on desktop, my only gripe is that my computer need to stay on because the AP need the software to run, want to offload the software onto something else so it not reliant on my pc to be running. since running it on the box isn't advice , you have any other ideas?
-
You don't need to run the software all the time.. Just to config, unless you are using portal or want stats on your clients, etc.. But the software does not have to be on in simple setup. You run it setup your AP with ssids, etc.. And then can shut the software down if you want.
And again you could just do layer 3 management of the AP where the controller is on different segment. Shoot you could even run the controller in the cloud if you wanted on a vps or amazon instance, etc.
-
You don't need to run the software all the time.. Just to config, unless you are using portal or want stats on your clients, etc.. But the software does not have to be on in simple setup. You run it setup your AP with ssids, etc.. And then can shut the software down if you want.
And again you could just do layer 3 management of the AP where the controller is on different segment. Shoot you could even run the controller in the cloud if you wanted on a vps or amazon instance, etc.
Ahh didn't know it wasn't require , i figure if i close the controller to the AP, it would not run.
you lost me there fora second could you give me a quick example of what you mean layer 3 management?
-
You don't need to bridge, you could run the wireless on a separate segment. People always think they need to bridge, and then someone always has to tell them bridging is the devil's work, and cat and dogs will start living together if they bridge two ports on pfSense. Now running UniFi on pfSense is satanic and you're better off buying something else to run it on, or running it in the cloud, or just not running it. I thought the topic was 'Need help setting up unifi on pfsense box', not 'Please talk me out of running unifi on pfSense'. Whatever, just trying to be helpful, not trying to compromise your soul with unholy knowledge. Here is the uninstall info.
Unifi lives under /usr/local/UniFi, so stop the controller-
service unifi.sh stop
then nuke the dir-
rm -R /usr/local/Unifi
The script installs a bunch of packages. They shouldn't hurt anything, but if you really want to clean up, you could 'pkg delete' them all.
Easiest way to clean everything up is to save the config, re-install, then restore the config. -
You don't need to bridge, you could run the wireless on a separate segment. People always think they need to bridge, and then someone always has to tell them bridging is the devil's work, and cat and dogs will start living together if they bridge two ports on pfSense. Now running UniFi on pfSense is satanic and you're better off buying something else to run it on, or running it in the cloud, or just not running it. I thought the topic was 'Need help setting up unifi on pfsense box', not 'Please talk me out of running unifi on pfSense'. Whatever, just trying to be helpful, not trying to compromise your soul with unholy knowledge. Here is the uninstall info.
Unifi lives under /usr/local/UniFi, so stop the controller-
service unifi.sh stop
then nuke the dir-
rm -R /usr/local/Unifi
The script installs a bunch of packages. They shouldn't hurt anything, but if you really want to clean up, you could 'pkg delete' them all.
Easiest way to clean everything up is to save the config, re-install, then restore the config.I still want to get unifi controller running on the box, the more options i have the better , the reasoning i use the switch was just get this up and running to see if the hardware functioning without any hitches. i think need to reinstall the controller script and see if it runs. i find it silly that i have 5 nic on this box and i cant make use of them. rather have pfsense manage everything
-
I provided a link to layer 3 setup.. Think of it this way with layer 2 the controller and the AP have to be on the same network.. They broadcast for each other.. With layer 3, you set an IP address on the AP and it talks to the controller that way.
https://community.ubnt.com/t5/UniFi-Controller-Installation/UniFi-Layer-3-methods-for-UAP-adoption-and-management/ta-p/455643
So did you figure out what was running on 8080 on your pfsense box? Did you install some proxy, set the gui to use that port? Out of the box pfsense shouldn't be listening on 8080 that I recall.. Mine sure isnt.
-
@shak2300
For sure the money for that must be also there, I know that too, no problems for me if peoples setting up
much as they can do on their one appliance, but do you know perhaps now, why I am preffering the choice
to get an dedicated UniFi WLAN Controller on a small Box like an RaspBerry PI2 or Alix (APU) board?I provided a link to layer 3 setup.. Think of it this way with layer 2 the controller and the AP have to be on the same network..
And if VLANs are in usage the controller must be a member of all VLANs!
-
@BlueKobold:
@shak2300
For sure the money for that must be also there, I know that too, no problems for me if peoples setting up
much as they can do on their one appliance, but do you know perhaps now, why I am preffering the choice
to get an dedicated UniFi WLAN Controller on a small Box like an RaspBerry PI2 or Alix (APU) board?Enlightening me on your thought, i just feel it waste to get a complete alix baord just to run a unifi controller, when i'm already running a apu in this box
I provided a link to layer 3 setup.. Think of it this way with layer 2 the controller and the AP have to be on the same network.. They broadcast for each other.. With layer 3, you set an IP address on the AP and it talks to the controller that way.
https://community.ubnt.com/t5/UniFi-Controller-Installation/UniFi-Layer-3-methods-for-UAP-adoption-and-management/ta-p/455643
So did you figure out what was running on 8080 on your pfsense box? Did you install some proxy, set the gui to use that port? Out of the box pfsense shouldn't be listening on 8080 that I recall.. Mine sure isnt.
I will let you know my result when i get off from work
-
I will let you know my result when i get off from work
So what were the results if I may ask? ;)
