Fresh install with auto config restore and new hardware
-
What I do is clean install on new system. Get it setup to the point I can get in the web gui. Restore backup, go to console and reassign nics, reboot.
Just did it Wednesday, in fact.
-
Well that was a big fail. Fresh install didn't find the config. Finally got it going and restored the config from the gui and none of my port forwards worked, none of my dynamic DNS worked. I'm tired and frustrated and going to bed, I'll try again in the morning…....
-
was the old system running 2.2.6 and the fresh install 2.3?
-
was the old system running 2.2.6 and the fresh install 2.3?
Tried a fresh install of 2.2.6 and 2.3 and they both failed. Going to have to manually reconfigure. :'(
-
have 1 idea try Diagnostics\States\States Reset States
-
No good. I REALLY didn't want to have to manually reconfigure this thing.
I can hook the old machine back up and everything works fine. New machine with a config restore no good. None of my port forwards work. I even tried deleting them and re configuring them.
-
Fresh install of 2.3 with manual configuration and port forwarding still not working. Everything else is working fine, I just can't seem to open any ports.
I'm completely at a loss at this point.
-
take the old nics and put them in the new system to test
-
Well one of them I can, the other is on board. Might just pick up a pro 1000 to try out, they're cheap enough.
-
If the NICs in the new hardware are recognized by 2.3, they should work fine.
In the event the automatic interface reassignment fails, manually editing the interface names in the config.xml before manually restoring has worked every time for me.
Standard warning: do not just search and replace for em0 to igb0 (or whatever) as you are almost guaranteed to have the text em0 in some base64-encoded blob in there somewhere like in a certificate. Manually approve each change ensuring you are really changing an interface name. There aren't usually that many of them.
Get your config how you like it
Reinstall fresh
Connect laptop to LAN
webgui at 192.168.1.1
kill the auto config (click the pfsense logo at the top)
Restore the old config (modified for the new hardware)
Auto-reboot and you're done. Reconnect to your modems, switches, etc.It really does take like 5 minutes.
If your "port forwards" still "don't work," there's probably another reason for it like you new interfaces aren't numbered like you think they are or something.
-
Get your config how you like it
Reinstall fresh
Connect laptop to LAN
webgui at 192.168.1.1
kill the auto config (click the pfsense logo at the top)
Restore the old config (modified for the new hardware)
Auto-reboot and you're done. Reconnect to your modems, switches, etc.That is an exact description of my workflow. Several times with 2.2.6 and 2.3. Tried with and without changing the interfaces in the config and it just doesn't work. Tried a fresh install and manually configuring everything and it doesn't work. Tried a fresh install with nothing but a single port forward and it doesn't work.
A port forward is so simple and should "just work" but for some reason it doesn't.
ETA: Since this seems to be a new/different problem now I'm going to stop replying to this thread and move the discussion to this one.
