Can't login to WebGUI after a couple of days
-
Hello,
When accessing WebGUI following error occured:
504 Gateway Time-out
nginx
Restarting Webconfigurator via SSH didn't help, only a reboot seems to solve the problem.
Problem returns every couple of days.Running latest stable pfSense via vmware.
Anyone a idea what's wrong here?
There's nothing in the logs. -
I also had this problem 1 or 2 times while experimenting…
next time it happens go to console or SSH and try "16 - Restart PHP-FPM" to narrow it done...
-
I think that's been fixed in 2.3.1 here:
https://redmine.pfsense.org/issues/6177
-
Switched to 2.3.1 Development now, and testing…
Thanks!
-
Problem returned after 1 day, restarting php-fpm from ssh does work.
I'm on:
2.3.1-DEVELOPMENT (amd64)
built on Mon May 16 06:51:39 CDT 2016
FreeBSD 10.3-RELEASE-p2The system is on the latest version.
-
You have the IPsec widget on your dashboard? If so, if you remove that, does it stop happening? Seems a couple have seen that, haven't run into it myself, but would be good to narrow it down.
-
Yes, having that one als widget, turning it off now.
-
I started having the exact same problem with the update to 2.3. I updated to 2.3.1 hopeful that this problem was resolved, but it still happens with the IPSEC widget active
-
Same problem here on 2.3.1. I do not have the IPSec widget.
Menu item 16 fixes issue for a time. Also, it seem the GUI slows down significantly over a short time after doing the reset.
-
@cmb:
You have the IPsec widget on your dashboard? If so, if you remove that, does it stop happening? Seems a couple have seen that, haven't run into it myself, but would be good to narrow it down.
No IPSec on my dashboard. While the OP mentioned the 504 returning after "days", I see it return within an hour or two.
thanks,
Dave -
Most if not all remaining instances of 504 gateway timeouts were fixed in 2.3.1_1.
-
@cmb:
Most if not all remaining instances of 504 gateway timeouts were fixed in 2.3.1_1.
I'm still experiencing the problem with 2.3.1_1
Dave
-
+1
2.3.1_1 64bit full, especially when re-starting a snort interface.
Intel(R) Atom(TM) CPU D525 @ 1.80GHz 4 CPUs, with 4 GB RAM and 120 GB SSD.
-
I just had this happen at our remote site, not using the ipsec widget.
Netgate SG-2440
2.3.1-RELEASE-p1 (amd64)
built on Wed May 25 14:56:42 CDT 2016 -
I just had this happen at our remote site, not using the ipsec widget.
Netgate SG-2440
2.3.1-RELEASE-p1 (amd64)
built on Wed May 25 14:56:42 CDT 2016Just happened to our local pfsense box, same as above (2.3.1_1). Will try to restart the web interface from console.
-
https://redmine.pfsense.org/issues/6396 is marked closed. Is that a different bug, or should it be re-opened? I know there are 502's and 504's going on.
In any case, what is the correct redmine ticket for the remaining issue being discussed here?
edit: I found https://redmine.pfsense.org/issues/6406 which seems to be "this"
-
https://redmine.pfsense.org/issues/6396 is marked closed. Is that a different bug, or should it be re-opened? I know there are 502's and 504's going on.
In any case, what is the correct redmine ticket for the remaining issue being discussed here?
edit: I found https://redmine.pfsense.org/issues/6406 which seems to be "this"
I'm getting
"504 Gateway Time-outnginx"
It just seems to happen randomly. Doing the reset from the console fixes it for some time.
My one box was up for ~12 days before it happened, the other was ~9 days. So…
EDIT: The widgets I'm using on both are: System Information, Interfaces, Gateways, Traffic Graphs
Not sure if that helps. Also running ipsec tunnel between locations.
-
Just happened to me. 2.3.1_1. No IPSec or OpenVPN widgets. 20 days uptime. 504 error. I have an IPSec site-to-site running.
:(
OpenVPN server also stops working
Doing an option 16) Restart PHP-FPM did allow me to access the web gui but did not fix OpenVPN. Had to restart OpenVPN server to fix OpenVPN access.
-
Happened again a couple days ago… I want to say this problem has persisted through the "fixes" in 2.3.1_1
-
Do people seeing this with any regularity have anything interesting in the system log? Try filtering on frag.
